• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.2
• /
• pp.285-297
• /
• 2015

In this paper, Ulta-WideBand (UWB) channel measurement and modeling based on compressive sampling (CS) are proposed. The sparsity of the channel impulse response (CIR) of the UWB signal in frequency domain enables the proposed channel measurement to have a low-complexity and to provide a comparable performance compared with the existing approaches especially used for the indoor geo-localization purpose. Furthermore, to improve the performance under noisy situation, the soft thresholding method is also investigated in solving the optimization problem for signal recovery of CS. Via numerical results, the proposed channel measurement and modeling are evaluated with the real measured data in terms of location estimation error, bandwidth, and compression ratio for indoor geo-localization using UWB system.

• Journal of Advanced Navigation Technology
• /
• v.25 no.5
• /
• pp.357-362
• /
• 2021

UWB(ultra wide band) communication systems employ short pulses to transmit information which spreads the signal energy over a very wide frequency spectrum. Received signal-to-noise power ratio of UWB signals is an important factor in determining the accuracy of a positioning system. As the signal to noise power ratio gets higher, positioning errors decrease since noise becomes less effective. Calculation of signal to noise power ratio as a function of communication distance provides important guidelines for the system design. And the performance of a positioning system also depends heavily on the channel model. As a result of the analysis, it was found that the performance of the received signal to noise power ratio according to the communication distance was better in the LOS channel environment than in the Non LOS(line of sight) channel environment. And as the symbol interval of the preamble signal increases at a specific communication distance, the channel capacity of the UWB system increases.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.15 no.6
• /
• pp.29-34
• /
• 1978

It has been investigated that the elect of an wideband FDM-FM signal upon an M-ary coherent PSK (MCPSK) signal in an intersystem radio interference environment between analog and digital systems, which had not been discussed before and had been obscure. It is assumed that PSK and FM signal are adjacently allocated in same radio frequency band. And the symbol error performance of MCPSK signal with co-channel and adjacent channel interference from an FDM-FM signal is evaluated with considering the receiver noise. The numerical results for the theoretical symbol error rates of MCPSK system in the presence of Gaussian noise and co-channel or adjacent channel interference are given in graphical forms as the function of carrier-to-noise ratio (CNR), carrier-to-interference ratio (CIR) and normalized carrier separation between the desired PSK and interfering FM signal. The objective of this research is to find some optimal conditions for coexistence of analog and digital systems in an intersystem interference environment. The results we obtained here stress a possible utilization of them for designing the frequency allocation, bandwidth and power of PSK channel in the intersystem interference from an FDM-FM signall.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.43 no.2 s.344
• /
• pp.7-15
• /
• 2006

Recently, Ultra-wideband (UWB) Communication systems have become a popular research topic. UWB system is characterized by the fact that the digital information represented by a subnanosecond pulses is transmitted through the air. In this paper, we consider the PPSM scheme that combine PPM and PSM. We provide the performance in AWGN and SV multipath channel which consists of $CM1\~CM4$. The optimal symbol set for M-ary system in multipath channel which shows good performance is also presented. The simulation results show that the performance in CM4 is worse than that in CMI due to long delay spread, many multipath components, 4-ary system outperforms binary system in Low$E_b/N_0$ but not in high $E_b/N_0$. We find system have the optimal symbol set in multipath channel.

• Journal of Advanced Navigation Technology
• /
• v.23 no.6
• /
• pp.589-596
• /
• 2019

With the proliferation of intelligent transportation system (ITS) with dedicated short-range communication (DSRC) deployment, there are various applications requiring different throughput and reliability performance. To meet the enhanced throughput requirements in newly generated applications, IEEE 802.11bd is proposed to standardize for support of enhanced throughput and latency, preserving the fairness with previously deployed WLAN V2X devices. One of the main features of IEEE 802.11 bd is 20 MHz transmission to support the high data rate. In this paper, the primary channel selection method is proposed to guarantee the fairness with frame transmissions with 10 MHz bandwith including communications in WLAN V2X devices deployed with IEEE 802.11p. Simulation shows that the proposed channel access method for 20 MHz transmission with primary selection preserves the fairness without the change of channel access method in wide-band transmission.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.42 no.1
• /
• pp.25-30
• /
• 2017

Millimeter wave (mmWave) bands are expected to improve date rate of 5G systems due to the wide available bandwidth. While severe path loss in those bands has impeded the utilization, short wavelength enables a large number of antennas packed in a compact form, which can mitigate the path loss. However, estimating the channel with a conventional scheme requires a huge training overhead, hence an efficient estimation scheme operating with a small overhead needs to be developed. The sparsity of mmWave channels caused by the limited scatterers can be exploited to reduce the overhead by utilizing compressed sensing. In this paper, we introduce compressed sensing techniques for mmWave channel estimation. First, we formulate wideband channel estimation into a sparse recovery problem. We also analyze the characteristics of random measurement matrix constructed using quantized phase shifters in terms of mutual incoherence.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.14 no.8
• /
• pp.845-854
• /
• 2003

In this paper, the characteristics of compensation for WDM channel signal distortion due to both chromatic dispersion and Ken effect in 1,000 km 200 Gbps(5${\times}$40 Gbps) WDM systems was investigated. The WDM system has a path-averaged intensity approximation(PAIA) mid-span spectral inversion(MSSI) as a compensation method. This system has a highly nonlinear dispersion shifted fiber(HNL-DSF) optical phase conjugator(OPC) in the mid-way of transmission line. In order to evaluate the degree of compensation, 1 dB eye opening penalty(EOP), bit error rate(BER) characteristics and power penalty of 10$\^$-9/ BER are used. It is confirmed that HNL-DSF is an useful nonlinear medium in OPC fur wideband WDM system with PAIA MSSI and that the optimal compensation for WDM channel distortion is achieved by the selection of pump light power of OPC, which equalize the conjugated light power into the second half fiber section with the input WDM signal light power depending on total transmission length, dispersion coefficient of fiber, OPC pump light wavelength, conversion efficiency of WDM channel in OPC.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.26 no.11B
• /
• pp.1546-1555
• /
• 2001

Conventionally, in a CDMA system analysis, we assume only a single path within one chip duration. But, in this paper, we assume various number of multipaths within one chip duration according to spreading bandwidth in fixed channel model. Thus we take into account of the effects of autocorrelation and relative phases among multipath components within one chip duration according to different bandwidth, and analyze fading effects. And we derive the pdf of output signal. Then, we derive the average error probability versus the number of users from derived pdf. We use a Maximal Ratio Combining (MRC) RAKE receiver under the JTC channel model which is one of the popular realistic wideband channel models. And we employ hybrid FDMA/CDMA systems to compare the performance of W-CBMA system for the same occupied total bandwidth. Then, we compare and analyze them for different bandwidth based on the number of users as a parameter. From the simulation results for different bandwidth, better performance can be obtained for wider bandwidth system where more resolvable multipath components are available.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.37 no.1
• /
• pp.66-75
• /
• 2000

In this paper, we present the efficient image transmission system using designed source-channel combined coder in W-CDMA mobile communication system. In proposed schemes, we decompose the wavelet transformed hierarchical band-images into some types of different size blocks which have different properties in error sensitivity. The RS(Reed-Solomon) coder with different coding rate is used for each decomposed source blocks which has different importance. In addition, we combine retransmitted error frames in Truncated Hybrid Type I ARQ. The proposed algorithm shows efficient image transmission methods because it is not much degraded in PSNR compared with the existing not combined source-channel coder in erroneous wireless channel.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2007.10a
• /
• pp.807-810
• /
• 2007

Recently, ultra-wideband (UWB) technology based on the transmission of short duration pulses has gained much interest for its application to wireless communications. UWB small scale channel modeling work, including statistical characterization and potential models, are discussed. The significance, in terms of performance, of the channel impulse response model chosen for the simulation of UWB communications systems is also evaluated. Three traditional models are found to be useful for modeling NLOS UWB channels, but not LOS channels. In this paper, a new model for LOS UWB channels is presented and shown to represent LOS channels much more accurately than the traditional models.