• 한국전자파학회논문지
• /
• 제19권1호
• /
• pp.61-70
• /
• 2008

본 논문에서는 멤스 기술의 하나인 연성 인쇄 회로 기판을 이용하여 임의의 형태로 변형이 가능한 초고주파 멤스 송신기를 제안하였다. 연성 인쇄 회로 기판은 그 무게가 가볍고 두께가 얇아 경량 소형화 모듈을 만드는데 유리한 장점이 있다. 또한, 연성 인쇄 회로 기판은 종이와 같이 유연한 특성을 가지고 있어 평면이 아닌 임의의 곡면 등에 실장할 수 있는 장정을 가지고 있다. 본 논문에서는 근거리 센서 네트워크 구성을 위한 직교 주파수 분할 다중 전송 방식을 위한 선형 무선 송신기를 설계 제작하였다. 송신 모듈의 능동 회로는 전력효율이 높고 선형성이 우수하여 전력 증폭기에 많이 사용되고 있는 InGaP/GaAs HBT 공정을 사용하여 설계 및 제작하였으며, 매칭 회로 및 필터 등의 수동 회로는 연성 인쇄 회로 기판에 직접 집적화 하여 제작하였다. 제작된 멤스 송신기는 EVM 특성을 통하여 시스템 성능을 분석하였다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 1992년도 가을학술발표회 논문집
• /
• pp.75-86
• /
• 1992

The elevation of reclamation work in the coastal area for the industrial complex is determined through the investigation and review of marine conditions, drainage plan and fill materials. The embankment to be constructed with crushed stone on the soft soil should be safe against the wave force, immediate and long term consolidation settlement, overturning and sliding due to self-weight and other forces. Because of lack of fill material from the borrow pit, the soft marine clay to be dredged shall be used as the reclamation material. And Paper Drain Board is used as the improvement method for the deep soft clay strata.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2005년도 추계학술발표대회 논문집
• /
• pp.239-242
• /
• 2005

This paper introduced an approach of improvement of performance of Electric device for EMU type Train like as TTX. The electric equipments are characterized by insulation, Noise, cooling system etc. and Their weight arc decided by these factors. There are two kinds of power source in EMU train. First, DC voltage source, 1500 volt, 750 volt is used for subway system. Second, AC power source 25000 volt is applied to high speed train and existing main lines. Composite material has the protection of inrush current and high frequency noise. We can use this material to minimize weight of train. Additionally we can get energy saving when operator service TTX.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 하계학술대회 논문집 C
• /
• pp.1654-1656
• /
• 1996

Generallly speaking, busbar made with Cu or Cu alloys and producted by plastic manufacturing process. In this study, we reacarch the trend and manufacturing of Cu clad Al busbar for low cost and light weight which used for a electric power suply of distributing board. The objectives of this study is the trend of busbar on electric power supply, the process and application for Cu clad Al busbar and the relation between electric properites and manufacturing operating process on contact parties

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2013년도 추계 학술논문 발표대회
• /
• pp.198-199
• /
• 2013

To prevent energy waste in buildings used heat insulator. Heat insulator materials can be classified inorganic and organic. The inorganic material has lower water resistance. The inorganic material is heavy and worse thermal performance than organic materials. Technologies on energy saving and materials used in curtain walls have progressed with increase of high-rise and large buildings. However, there is little study to explain water resistance performance of the curtain walls. This study focused on evaluation of insulation of inorganic materials and performance evaluation by thermal conductivity.

• 한국멀티미디어학회논문지
• /
• 제25권1호
• /
• pp.39-51
• /
• 2022

Image-based gender classification and age estimation of human are classic problems in computer vision. Most of researches in this field focus just only one task of either gender classification or age estimation and most of the reported methods for each task focus on accuracy performance and are not computationally light. Thus, running both tasks together simultaneously on low cost mobile or embedded systems with limited cpu processing speed and memory capacity are practically prohibited. In this paper, we propose a novel light-weight gender classification and age estimation method based on ensemble multitasking deep learning with light-weight processing neural network architecture, which processes both gender classification and age estimation simultaneously and in real-time even for embedded systems. Through experiments over various well-known datasets, it is shown that the proposed method performs comparably to the state-of-the-art gender classification and/or age estimation methods with respect to accuracy and runs fast enough (average 14fps) on a Jestson Nano embedded board.

• Journal of the Korean Wood Science and Technology
• /
• 제20권3호
• /
• pp.29-37
• /
• 1992

This research was carried out to investigate the effects of cyclic humidification on the dimensional stability of particleboard manufactured according the three specific gravity levels and com-ply fabricated with a core of particleboard and veneer or plywood as the face and back materials. Both the particleboard and com-ply were subjected to four cycles of 50-90-50% relative humidity. The results are summarized as follows: Particleboard and com-ply followed a clear pattern of increasing dimensions and weight on the adsorption cycle and decreasing dimensions and weight on the humidification cycle. After the fourth cycle, the dimensions and weight of both particleboard and com-ply were greater than those originally measured. The greater part of increase in occurred during the first humidification cycle. The specific gravity of particleboard has a significant effect thickness and volume change. The dimensional stability of com-ply was better than that of particleboard. In addition, the dimensional stability of com-ply bonded with plywood was better than that of com-ply bonded with veneer.

• 한국항공운항학회지
• /
• 제26권3호
• /
• pp.93-104
• /
• 2018

It is mandatory to use car seats for infants and children in the private vehicles in accordance with the traffic law of Korea. Recently, legislation has also been proposed to expand the use car seats to express and intercity buses. This reflects a growing consensus that mandatory infant and child car seats, both for private and commercial vehicles, are essential. However, Korean laws concerning infants and children on board aircraft allow parents or guardians to hold children under two years of age on their laps without any restraint devices. It is not possible for a parent to physically restrain an infant or child, especially during a sudden acceleration or deceleration, unanticipated or severe turbulence, or impact. The use of CRS provides an equivalent level of safety to infants and children as that afforded to adult passengers wearing seat belts. But there is no regulation even about Child Restraint Systems on board aircraft in Korea. To enhance their safety, infants and children should be restrained in an approved child restraint system that is appropriate to their weight and height. It is necessary to examine whether infants and children in flight can achieve the same level of safety as an adult.

• Journal of the Korean Wood Science and Technology
• /
• 제45권3호
• /
• pp.335-342
• /
• 2017

본 연구는 제재과정에서 발생하는 톱밥과 농업부산물인 귤박의 새로운 활용 방안을 찾기 위하여 수행되었다. 귤박 혼합율 및 밀도별로 혼합보드를 제조한 후 수지함침율, 탄화온도 및 귤박혼합율별로 세라믹화 하여 물리적 성질을 조사하였다. 수지함침율이 증가할수록 두께와 길이감소율 및 밀도는 증가하였고, 중량감소율은 감소하였다. 탄화온도가 증가할수록 중량감소율은 증가되었고, 길이와 두께 감소율은 $1000^{\circ}C$까지 증가하고 그 이후의 증가는 완만하였다. 귤박혼합율이 높을수록 중량과 두께 및 길이 감소율은 감소하였다.

• Macromolecular Research
• /
• 제14권4호
• /
• pp.430-437
• /
• 2006

The ultra-drawing process of an ultra high molecular weight polyethylene (UHMWPE) gel film was examined by incorporating linear low-density polyethylene (LLDPE) and $BaTiO_3$ nanoparticles. The effects of LLDPE and the draw ratios on the morphological development and mechanical properties of the nanocomposite membrane systems were investigated. By incorporating $BaTiO_3$ nanoparticles in the UHMWPE/LLDPE blend systems, the ultra-drawing process provided a highly extended, fibril structure of UHMWPE chains to form highly porous, composite membranes with well-dispersed nanoparticles. The ultra-drawing process of UHMWPE/LLDPE dry-gel films desirably dispersed the highly loaded $BaTiO_3$ nanoparticles in the porous membrane, which could be used to form multi-layered structures for electronic applications in various embedded, printed circuit board (PCB) systems.