• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2004년도 춘계학술발표회
• /
• pp.651-658
• /
• 2004

In this study, we introduced the spiral pipe nailing system (refer as SPN system) with self drilling method, can apply to ground which is hard to keep shape of bore hole, and performed limit equilibrium analysis with simplilied trial wedge method while length ratio and bond ratio were altered to evaluate slope stability considered of tensile strength and bending stiffness. A newly soil nailing system named as the SPN system is respected to reduce displacement of nail and increase global slope stability. And effects of various factors related to the design of the SPN system, such as the type of drilling method and the bit, are examined throughout a series of the displacement-controlled field pull-out tests. 6 displacement-controlled field pull-out tests are performed in the present study and the volume of grouting arc also evaluated based on the measurements. In addition, short-term characteristics of pull-out deformations of the newly proposed SPN system are analyzed and compared with those of the general soil nailing system by carrying out the displacement-controlled field pull-out tests.

• 호남수학학술지
• /
• 제38권4호
• /
• pp.819-831
• /
• 2016

The present paper investigates some properties of the digital homology in [1, 4, 5] and points out some unclearness of the definition of a digital homology and further, suggests a suitable form of a digital homology. Finally, we calculate a digital homology group and a relative digital homology group of some digital wedge sums. Finally, the paper corrects some errors in [6]. In the present paper all digital images (X, k) are assumed to be non-empty and k-connected.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2009년 춘계학술대회논문집
• /
• pp.191-195
• /
• 2009

A parametric study for for the water entry of a two dimensional symmetric wedge with deadrise angle of 10 degrees was carried out to find out the most dominant parameter. Water entry problem with constant velocity is simplified as the stationary wedge in the way of the upcoming water surface. The calculated impact loads showed that the effect of the viscosity was not so important in this problem. For a given grid system a suitable time step size can be found. The most sensitive parameter was found to be the grid size.

• 한국음향학회지
• /
• 제20권4호
• /
• pp.5-11
• /
• 2001

무반향 수조의 내벽 흡음재로 사용되는 무반향 타일을 쐐기형으로 제작하여 쐐기의 꼭지각 변화에 따른 음향학적인 특성을 고찰하였다. 실험에서 사용된 무반향 타일 평판 시료의 크기는 400mm x 385mm x 15.5 mm이며, 무반향 타일을 구성하는 쐐기의 길이는 27.5mm로 고정하였다. 음선추적법을 이용하여 무반향 타일 시료 평판에 부착될 흡음쐐기의 꼭지각을 각각30°와 60°로 설계 및 제작하였으며, 수중에서 쐐기가 부착되지 않은 평판형 무반향 타일과 흡음쐐기의 꼭지각이 30°와 60°인 무반향 타일에 음파를 수직 입사하여 반사손실을 측정하였다. 또한 쐐기의 유무와 무반향 타일을 구성하는 쐐기의 꼭지각 변화에 따른반사 및 흡음특성을 고찰하였다. 쐐기의 꼭지각이 30°일 때 60°보다 반사손실이 증가함을 이론을 통해 예측하였고, 실험을 통해 확인할 수 있었다. 본 실험의 결과로써 음선추적법을 이용하여 설계 및 제작한 무반향 타일의 흡음쐐기의 꼭지각이 30°인 무반향 타일의 흡음특성이 우수함을 확인할 수 있었다.

• Journal of Gastric Cancer
• /
• 제11권2호
• /
• pp.131-134
• /
• 2011

A laparoscopic wedge resection for a submucosal tumor, which is close to the gastroesophageal junction, is technically challenging. This can be a dilemma to both patients and surgeons when the tumor margin involves the gastroesophageal junction because a wedge resection in this situation might result in a deformity of the gastroesophageal junction or an injury to the lower esophageal sphincter, which ultimately results in lifelong gastroesophageal reflux disease. The patient was a 42 year-old male, whose preoperative endoscopic ultrasonographic finding did not rule out a gastrointestinal stromal tumor. He underwent a laparoscopic gastric wedge resection and prophylactic anterior partial fundoplication (Dor) and was discharged from hospital on the fifth postoperative day without any complications. There were no symptoms of reflux 5 months after surgery. A laparoscopic wedge resection and prophylactic anti-reflux surgery might be a good surgical option for a submucosal tumor at the gastroesophageal junction.

• 수산해양기술연구
• /
• 제41권3호
• /
• pp.222-226
• /
• 2005

A series of model tests carried out at the CWC of WJFEL for the purpose of prediction of resistance for the performance and improvement of resistance by attaching appendage for the ship of 50 knots class planing hull. The resistance performance evaluation has been carried out for the bare hull and for the appendage hull with two different depth of vertical type wedges. In the bare model test, trim and sinkage is calculated for the planing hull and the resistance is calculated. For minimizing the resistance, wedge appendage is attached and tested. Analysis and tests shows that for a 12.5mm wedge, resistance is minimum and overall power tallied to 5636ps.

• Kyungpook Mathematical Journal
• /
• 제52권4호
• /
• pp.405-412
• /
• 2012

The purpose of the present paper is towards working out a unified version of the study of certain weak forms of generalized open sets and their neighbouring forms, as are already available in the literature. In terms of an operation, as initiated by $\acute{A}$. Cs$\acute{a}$sz$\acute{a}$r, we introduce unified definitions of ${\wedge}_{\psi}$-sets, ${\vee}_{\psi}$-sets, $g{\cdot}{\wedge}_{\psi}$-sets and $g{\cdot}{\vee}_{\psi}$-sets and derive results concerning them.

• 한국소음진동공학회논문집
• /
• 제15권11호
• /
• pp.1318-1323
• /
• 2005

In this paper, the vibration analysis for the Euler-Bernoulli complete and truncate wedge beams by differential Transformation method(DTM) was investigated. The governing differential equation of the Euler-Bernoulli complete and truncate wedge beams with regular singularity is derived and verified. The concepts of DTM were briefly introduced. Numerical calculations are carried out and compared with previous published results. The usefulness and the application of DTM are discussed.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2005년도 추계학술대회논문집
• /
• pp.507-512
• /
• 2005

This paper investigated the vibration analysis fer the Euler-Bernoulli complete and truncate wedge beams by Differential Transformation Method(DTM). The governing differential equation of the Euler-Bernoulli complete and truncate wedge beams with regular singularity is derived and verified. The concepts of DTM were briefly introduced. Numerical calculations are carried out and compared with previous published results. The usefulness and the application of DTM are discussed.

• 융복합기술연구소 논문집
• /
• 제3권2호
• /
• pp.17-21
• /
• 2013

Hot cross wedge rolling process as an incremental forming has many advantages such as the material usage, the short process time, the automatic equipment line and the low forming load. However, it occurs some defects such as the surface groove, the axis warping and the Mannesmann hole. In this paper, the defect of the Mannesmann hole was carried out. Finite element analysis was utilized to reveal the stress distribution, the rotation of the specimen and the change of section profile. Cross wedge rolling experiment was also conducted on the generation of the Mannesmann hole. It was demonstrated according to the spreading angle with respect to the various types of material. In the view point of metal flow, the smaller forming angle and the larger spreading angle increase opportunities of the defect hole generations.