• ETRI Journal
• /
• 제27권1호
• /
• pp.95-101
• /
• 2005

Waveguide structures of the stand-alone electroabsorption (EA) modulator and the electroabsorption modulated laser (EML) are investigated using the 3D beam propagation method. The EA waveguide structures with InP-based passivation layers show saturation in the extinction ratio (ER) due to the stray light traveling through the passivation layers. This paper demonstrates that narrower passivation layers suppress stray-light excitation in the EA waveguide, increasing the ER. A taper structure in the isolation section of the EML waveguide can reduce the mode mismatch and suppress the excitation of the stray light, increasing the ER further. Low-index-polymer passivation layers can confine the mode more tightly in the active waveguide, yielding an even higher ER.

• Journal of the Optical Society of Korea
• /
• 제15권4호
• /
• pp.403-406
• /
• 2011

Here we report Airy beams coupled with waveguide modes. These waveguide Airy (WAiry) beams propagate through layered planar structures inheriting the characteristics of waveguide modes as well as those of Airy beams, such as diffraction-free and accelerating features. In particular, we focus on the WAiry beams associated with backward waveguide modes, showing that the backward feature can alter the trajectories of the WAiry beams significantly. Based on this, we propose a new scheme of waveguide-type polarization/power beam splitters.

• 한국광학회:학술대회논문집
• /
• 한국광학회 2006년도 동계학술발표회 논문집
• /
• pp.151-152
• /
• 2006

In this paper, a novel waveguide analysis is addressed based on the rigorous coupled wave analysis method. Using the proposed method, we can analyze half-infinite waveguide structures rigorously calculate.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2004년도 하계종합학술대회 논문집(1)
• /
• pp.139-142
• /
• 2004

X-band Waveguide slot way antenna is developed for heliborne MTD radar applications. The antenna is composed of multi-layer waveguide structures. Each of them has it's own functions, such as, radiation, power/phase distribution, coupling, etc. Broad-wall offset slots are used for radiators, inclined slots on broad-wall for power distribution to radiating(branch) waveguide, some kind of coaxial probe structures for in-phase coupling and H-plane T-junction power dividers. Antenna is realized by precision machining and careful assembly. It is tested and measured by 3m${\times}$l.7m planar near-field probe, which is set-up in MTG. Far-field calculations have good agreement in tolerable bounds. Special but necessary process such as brazing, will increase the accuracy and performance. Results show promising possibilities of future applications for real systems.

• Transactions on Electrical and Electronic Materials
• /
• 제17권2호
• /
• pp.118-120
• /
• 2016

A coplanar waveguide employing periodic 3D coupling structures (CWP3DCS) was developed for application in miniaturized on-chip passive components on silicon radio frequency integrated circuits (RFIC). The CWP3DCS showed the shortest wavelength of all silicon-based transmission line structures that have been reported to date. Using CWP3DCS, a highly miniaturized impedance transformer was fabricated on silicon substrate, and the resulting device showed good RF performance in a broad band from 4.6 GHz to 28.6 GHz. The device as was 0.04 mm² in size, which is only 0.74% of the size of the conventional transformer on silicon substrate.

• Journal of electromagnetic engineering and science
• /
• 제12권1호
• /
• pp.122-127
• /
• 2012

Post-wall waveguide structures have attracted a great deal of attention for micro- and millimeter-wave applications. One of the waveguide’s applications is a slotted waveguide array. In order to design the slotted array, the characteristics of a slot unit alone on the post-wall waveguide should be investigated. In this paper, a method for extracting the S-parameters of a unit slot is proposed. This simple method requires only two kinds of waveguides: waveguides without a slot unit and waveguides with a slot unit. Three kinds of slot units are fabricated, and the extracted results show a high level of agreement with predicted (simulated) results. With this method, the equivalent slot length can also be found.

• 대한전자공학회논문지TC
• /
• 제39권10호
• /
• pp.38-45
• /
• 2002

본 논문에서는 기존의 Compact 2D FDTD(Finite-Difference Time-Domain)에 대한 고속 알고리즘으로써 시간간격 △t가 안정조건(Stability Condition)에 의해 제한받지 않는 Compact 2D ADI(Alternating Direction Implicit)-FDTD 차분식을 제안하였다. 또한 구현된 알고리즘의 정확성 및 효율성을 검증하기 위하여 내부가 공기로 채워져 있는 구형(Rectangular) 도파관과 차폐된 전송선로를 해석하였다. 본 논문의 결과는 기존의 Compact 2D FDTD의 결과 및 해석적인 해와 매우 잘 일치하며, 계산 소요시간도 기존의 Compact 2D FDTD에 비해 상당히 절약되었음을 확인하였다. 제안된 알고리즘은 도파관 구조의 분산 특성 연구에 있어 효율적인 고속화 기술로서 의미가 있다고 할 수 있다.

• 한국음향학회지
• /
• 제29권7호
• /
• pp.448-457
• /
• 2010

단면의 형상이 길이방향으로 일정한 무한길이 도파관 구조물 (waveguide structures)에 대한 진동 및 파동전파 특성은 도파관유한요소법 (waveguide finite element method, WFEM)을 이용해 효과적으로 해석할 수 있다. 도파관유한요소법은 2차원 단면만을 FE 모델링하여 해석하므로 모델의 크기가 작고 연산시간이 짧다는 장점이 있다. 도파관 구조물이 외부 유체와 연성된 경우, 원통형 실린더 또는 파이프와 같이 단면의 형상이 단순한 경우에는 이론적 해석을 수행할 수 있다. 반면 복잡한 형상의 단면을 가진 도파관구조물이 유체와 연성된 경우에는 수치해석 방법이 요구된다. 외부 유체와 연성된 도파관 구조물은 외부 유체와 도파관유한요소 (WFE)를 연성시켜 해석하는 수치해석 방법을 고려할 수 있다. 본 논문에서는 외부 유체 모델링에 경계요소 (Boundary Element)를 도입하고 이를 도파관유한요소와 연성시킨 WFE/BE 방법을 소개한다. 이 방법의 적용 예로써 단순형상의 파이프에 대해 외부 유체의 유/무에 따른 분산선도와 가진점 모빌리티 (point mobility)를 구하고 이를 이론해석 결과와 비교하였다. 또한 WFE/BE 방법을 이용해 파이프에서 외부 유체로 방사되는 음향파워를 구하고 접수 유/무에 따른 영향을 살펴보았다.

• ETRI Journal
• /
• 제25권6호
• /
• pp.535-537
• /
• 2003

We propose a rigorous 2D approximation technique for the 3D waveguide structures; it can minimize the well-known approximation errors of the commonly used effective index method. The main concept of the proposed technique is to compensate for the effective cladding index in the equivalent slab model of the original channel waveguide from the modal effective index calculated by the nonuniform 2D finite difference method. With simulations, we used the proposed technique to calculate the coupling characteristics of a directional coupler by the 2D beam propagation method, and the results were almost exactly the same as the results calculated by the 3D beam propagation method.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2013년도 춘계학술대회 논문집
• /
• pp.102-107
• /
• 2013

It is important to understand the vibrating behavior of plate structures for many engineering applications. In this study, vibration characteristics of strip plates which have finite width and infinite length are investigated theoretically and numerically. The waveguide finite element approach is used in this study which is known as an effect tool for waveguide structures. WFE method requires only cross-sectional FE model and uses theoretical harmonic solutions for the wave propagation along the longitudinal direction. First of all for a simple strip plate, WFE results are compared with theoretical ones such as the dispersion diagrams, point mobilities, etc. to validate the numerical model. Then in the numerical analysis, the several different types of longitudinal stiffeners are included to the plate model to investigate the effects of the stiffeners in terms of the dispersion curves and mobilities.