• 한국광학회지
• /
• 제15권1호
• /
• pp.22-27
• /
• 2004

본 논문에서는 광도파로와 광섬유사이에서 광손실을 줄이기 위한 모드 크기 변환기를 설계하였다. 설계된 모드 크기 변환기는 주기적으로 분리된 테이퍼 광도파로로 구성된 모드 크기 변환기이며, 공정상의 적용이 용이한 수평 테이퍼 구조를 선택하였다. 높이와 폭이 3$\mu\textrm{m}$${\times}$3$\mu\textrm{m}$이며 1.5%실리카 광도파로의 경우 파장이 1550nm 파장에서 최적의 모드 크기 변환기 설계 파라미터는 테이퍼 영역의 길이가 500$\mu\textrm{m}$이고, 분리된 광도파로의 길이는 5$\mu\textrm{m}$이며, 주기의 Duty-Cycle은 0.95, 광도파로와 광섬유의 접속면에서의 폭은 1.3$\mu\textrm{m}$이였다. 이 때 결합손실은 0.33㏈/point로 광섬유와 광도파로를 직접 연결할 때 보다 1.27 ㏈/point가 감소하였다.

• 센서학회지
• /
• 제31권1호
• /
• pp.69-69
• /
• 2022

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 추계종합학술대회 논문집(1)
• /
• pp.493-496
• /
• 2000

This paper presents a slotted leaky waveguide antenna using a rectangular waveguide for mobile reception of DBS (Direct Broadcasting Satellite). A slotted rectangular waveguide in leaky-wave operation can obtain a large beam-tilting angle of 45$^{\circ}$, which is an attractive candidate of mobile DBS receiving antennas because it can be installed horizontally. SNM is used to solve arbitrary shape and materials constant, derived from maxwell's equations. In this paper, analyze cross slot waveguide antenna using SNM. and verify by HFSS.

• 전자공학회논문지A
• /
• 제29A권11호
• /
• pp.19-24
• /
• 1992

In this paper, a high frequency method is developed which combines the uniform Geometrical Theory of Diffraction(GTD) and the Aperture Integration(AI) to analyze electromagnetic plane wave scattering by a perfectly-conducting, open-ended, semi-infinite parallel plate waveguide with a uniform layer of absorbing material on its inner wall, and with a slanted planar termination inside. In this method, first, the field of an arbitary point inside the paraller plate waveguide is computed by the GTD. Second, the field scattered into exterior region by the waveguide is found using the equivalent current, which can be obtaind from the aperture field of the waveguide and using the AI. Numerical results based on this GTD method are presented and compared with those based on the mode matching method.

• Tribology and Lubricants
• /
• 제27권3호
• /
• pp.156-161
• /
• 2011

The rectangular waveguide technique can be used to measure the complex permittivity of dielectric material of various thickness and cross section. This paper presents the analysis system of engine oil permittivity at which deterioration of engine oil is measured at the X-band(8-12.5 GHz). The middle of the rectangular waveguide has engine oil case and is connected with VNA(Vector Network Analyzer) for the measurement of the transmission$(S_{21})$ and reflection$(S_11)$ and then the permittivity is extracted. The deterioration of engine oil is proved by the comparison with both the extracted data and reference data. As the additional research, This paper suggest that an accurate permittivity is considered by not only the wave guide length but the air gap between oil case and the waveguide.

• Journal of electromagnetic engineering and science
• /
• 제18권4호
• /
• pp.248-253
• /
• 2018

An electromagnetic boundary-value problem of a tapered rectangular waveguide is rigorously solved based on eigenfunction expansion and the mode-matching method. Scattering parameters of the tapered rectangular waveguide are represented in a series form and calculated in terms of different rectangular waveguide combinations. Computation is performed to analyze reflection and transmission characteristics. Conductor loss by surface current density is also calculated and discussed.

• 한국소음진동공학회논문집
• /
• 제17권4호
• /
• pp.310-316
• /
• 2007

This paper presents a theoretical approach to describe the characteristics of vibration transmission in the waveguide with varying cross-section. The waveguide considered in this paper has a tapered section in the middle of an axisymmetric stepped rod. The distributions of the vibration displacement and stress along the waveguide were derived and they were verified by comparing the theoretically-calculated results with those obtained by the finite-element analysis. The vibration magnification and the concentrated stress under forced vibration were calculated for this rod according to the taper length. The paper established a theoretical basement of designing waveguides for maximizing the vibration transmission under minimum stress concentration.

• 전자공학회논문지A
• /
• 제31A권1호
• /
• pp.33-38
• /
• 1994

In this paper, waveguide banpass filters using H-plane step discontinuities are designed based on the field theory analysis and optimization of the resonator lengths as well as dimensions of discontinuities, instead of the conventional synthesis method based on the equivalent circuit. The waveguide inductive obstacles introduced by H-plane step discontinuities analyzed using mode-matching method and the generalized scattering parameters are derived. Using the derived scattering parameters of the discontinuities as well as those of resonators, waveguide bandpass filters are designed through optimization method, modified Razor search method proposed by J.H.Bandler. Using this design procedures, waveguide bandpass filters are designed and tested at X-band(center frequency 10GHz) as well as Ka-band(center frequency 35GHz).

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2013년도 춘계학술대회
• /
• pp.59-60
• /
• 2013

광도파로를 해석하기 위해서 FDTD법을 이용하였다. 그러나 광도파로의 구조는 구동 주파수의 파장에 비하여 상대적으로 크고, 주기적인 구조 특성을 가지고 있다. 따라서 도파로의 해는 한 주기에 해당하는 구조를 대상으로 주기적 경계조건을 적용하여 구할 수 있다. 본 논문에서는 서로 다른 매질 등으로 구성되는 도파로를 대상으로 주기적 경계조건을 적용하고 그 특성을 해석하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 추계학술대회 논문집 학회본부 C
• /
• pp.1117-1119
• /
• 1999

An edge finite element method is applied to calculate the field distribution of a coupled waveguide structure. We compares a node based finite element method with the edge element one. For 2-d eigenvalue problems of waveguide structures, the former generates spurious eigenmodes, but the latter dose not. Using an simple rectangular waveguide, we implement both methods to obtain some results of field computation in waveguide. The paper shows that the finite element method using edge elements succeeds in suppressing spurious solutions.