Transactions of the Korean Society for Noise and Vibration Engineering (한국소음진동공학회논문집)

The Korean Society for Noise and Vibration Engineering (한국소음진동공학회)
권호 표지
DOI QR코드

DOI QR Code

Vibration Transmission Characteristics due to the Variation in the Cross-section of a Waveguide

파동 유도 봉의 단면 변화에 따른 진동 전달 특성

  • 김대승 (숭실대학교 대학원 기계공학과) ;
  • 김진오 (숭실대학교 공과대학 기계공학과)
  • Published : 2007.04.20
Download PDF
⟨ Previous Next ⟩

Abstract

This paper presents a theoretical approach to describe the characteristics of vibration transmission in the waveguide with varying cross-section. The waveguide considered in this paper has a tapered section in the middle of an axisymmetric stepped rod. The distributions of the vibration displacement and stress along the waveguide were derived and they were verified by comparing the theoretically-calculated results with those obtained by the finite-element analysis. The vibration magnification and the concentrated stress under forced vibration were calculated for this rod according to the taper length. The paper established a theoretical basement of designing waveguides for maximizing the vibration transmission under minimum stress concentration.

Keywords

References

  1. Toe, T. B., Aspinwall, D. K., Wise, M. L., 1998, 'Review on Ultrasonic Machining', International Journal of Machine Tools and Manufacturing, Vol. 38, No. 4, pp.239-255 https://doi.org/10.1016/S0890-6955(97)00036-9
  2. Eisner, E., 1963, 'Design of Sonic Amplitude Transformers for High Magnification', Journal of the Acoustical Society of America, Vol. 35, No. 9, pp. 1367-1377 https://doi.org/10.1121/1.1918699
  3. Rozenberg, L. D., Kazantsev, V. F., Makarov, L. O. and Yakhimovich, D. F., 1964, Ultrasonic Cutting, Consultant Bureau, New York, Chapter 3
  4. Kim, D. S., Kim, J. O., 2006, 'Variation in the Vibration Characteristics of a Piezoelectric Transducer due to Pre-pressure', Transactions of the Korean Society for Noise and Vibration Engineering, Vol. 16, No. 1, pp. 89-100 https://doi.org/10.5050/KSNVN.2006.16.1.089
  5. Amin, S. G., Ahmed, M. H. M., Youssef, H. A., 1995, 'Computer-aided Design of Acoustic Horns for Ultrasonic Machining Using Finite- element Analysis', Journal of Materials Processing Technology, Vol. 55, pp. 254-260 https://doi.org/10.1016/0924-0136(95)02015-2
  6. Graff, K. F., 1991, Wave Motion in Elastic Solids, Dover, New York, Chapter 2
  7. Li, Q. S., 2000, 'Exact Solutions for Longitudinal Vibration of Multi-step Bars with Varying Cross-section', ASME Journal of Vibration and Acoustics, Vol. 122, No. 2, pp, 183-187 https://doi.org/10.1115/1.568459
  8. Choi, I. S., Chun, H Y, Kim, J. O., Kim, I. S., 2003, 'Improving Wave Propagation Performance of an Ultrasonic Waveguide for Heat isolation', Journal of the Acoustical Society of Korea, Vol. 22, No. 7, pp. 545-553
  9. Marshall, W. 1996,'A Two-port Analogous Circuit and SPICE Model for Salmon's Family of Acoustic Horns', Journal of the Acoustical Society of America, Vol. 99, No. 3, pp. 1459-1464 https://doi.org/10.1121/1.414724
  10. Wolfram, S. 1999, The Mathematica Book, 4th ed.,Wolfram Media Inc., Cambridge University Press