• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2006년도 하계종합학술대회
• /
• pp.895-896
• /
• 2006

This paper proposes a new method to measure the ECG signal from the driver. The ECG signal is often measured in the room. But it is mixed with many kinds of noise when we measure it during the vehicle moving. We classified noise occupied most many parts as the experimental among them. And we designed one suitable filter for each noise. It used ALE(Adaptive Line Enhancement) to remove the noise occurred to electromagnetic wave in vehicle. To remove the noise occurred to steering or vibration of vehicle, we used Wavelet transformation after ALE(preprocessing filter).

• Journal of Magnetics
• /
• 제21권2호
• /
• pp.273-280
• /
• 2016

In this paper, the peristaltic flow of Psedoplastic fluid with variable viscosity in an asymmetric channel is examined. The bionic effects by means of magnetohydrodynamics (MHD) are taken into account. The assumptions of long wave length and low Reynolds number are taken into account. The basic equations governing the flow are first reduced to a set of ordinary differential equation by using appropriate transformation for variables and then solve by using perturbation method. The effect of physical parameters on the pressure rise, velocity and pressure gradient are illustrated graphically. The trapping phenomenon is analyzed through stream lines. A suitable comparison has also been made as a limiting case of the considered problem.

• 한국항만학회지
• /
• 제12권2호
• /
• pp.281-290
• /
• 1998

The propagation of water waves over irregular bottom bathymetry and around islands involves many process-shoaling, refraction, energy dissipation and diffraction. Numerical model in this study is developed with the mild slope equation to investigate wave transformation in water of varying depth and combined waves and a current. The method used is splitting method and minimax approximation. The numerical method used in this study is Crank-Nicolson scheme in the FDM. This model is applied to Vincent shoal and compared with laboratory experimental data. The results agreed well with laboratory data. Current effect is considered in this study. This model can be used for the estimation of rip current in the slowly varying topography.

• 한국방재학회:학술대회논문집
• /
• 한국방재학회 2008년도 정기총회 및 학술발표대회
• /
• pp.451-454
• /
• 2008

Potential tsunamis which may occur near Ryukyu Islands were simulated. Propagation characteristics of the potential tsunamis over the southwestern sea and the influence of tsunamis on the southwestern coast of Korean Peninsula were analyzed. The shallow water area in the east sea of China and the deep water Okinawa Trough play an important role in wave transformation and propagation of the potential tsunamis. The propagation characteristics of the potential tsunamis generated near Ryukyu Islands can be described as in followings : In the first stage after generation, the tsunamis propagate with high speed both northeastward and southwestward along the Okinawa Trough. As a result the waves are elongated and the tsunami height is significantly reduced. The elongated crest of tsunamis spans the whole distance of the Okinawa Trough and lines up toward the edge of the continental shelf of East China Sea. Then, the tsunamis are propagating towards the southeast coast of China. Thus, the influence of tsunamis on the Korean coasts becomes weak.

• Journal of Magnetics
• /
• 제18권3호
• /
• pp.255-259
• /
• 2013

In this paper a new coupling method for efficient and simple analysis of single phase induction motor is presented. The circuit representation of both the stator winding and each conducting rotor loop (composed of rotor bar and end ring segment) is used in conjunction with the distribution of magnetic flux linkage instead of inductance matrix. The flux linkage is calculated using air-gap flux density distributions driven by unit currents in the stator windings and rotor bars. The field distribution of one turn of a coil is calculated by FEM and the result is used to calculate total flux linkage by employing a coordinate transformation. The numerical results give good agreement with prior literature. The method is particularly effective in analyzing the effect of the number of rotor bars.

• Smart Structures and Systems
• /
• 제23권2호
• /
• pp.173-184
• /
• 2019

The main objective of this study is to evaluate the true fracture energy and monitor the damage progression in steel fibre reinforced concrete (SFRC) specimens using acoustic emission (AE) features. Four point bending test is carried out using pre-notched plain and fibre reinforced (0.5% and 1% volume fraction) - concrete under monotonic loading. AE sensors are affixed at different locations of the specimens and AE parameters such as rise time, AE energy, hits, counts, amplitude and duration etc. are obtained. Using the captured and processed AE event data, fracture process zone is identified and the true fracture energy is evaluated. The AE data is also employed for tracing the damage progression in plain and fibre reinforced concrete, using both parametric- and signal- based techniques. Hilbert - Huang transform (HHT) is used in signal based processing for evaluating instantaneous frequency of the acoustic events. It is found that the appropriately processed and carefully analyzed acoustic data is capable of providing vital information on progression of damage on different types of concrete.

• 한국정밀공학회지
• /
• 제12권6호
• /
• pp.87-95
• /
• 1995

In order to predict the case depth and case width in laser transformation hardening, a finite element method was used to analyze the temperature distribution on the material. Laser hardening of the specimens of SM45C and STE11steels was experimented by using the continuous wave CO$_{2}$ laser with the various travel speeds and the defocused Gaussian beam mode. Phosphate coating was adopted on the surface of SM45C to increase the absorption of 10.6 .mu. m laser energy. Experimental data show good agreement with the theoretical predictions. The maximum possible case depth can be predicted for the given laser hardening conditions, such as laser power, and travel speed.

• 한국전산구조공학회논문집
• /
• 제37권3호
• /
• pp.179-186
• /
• 2024

본 논문에서는 충격파 형태의 폭발 하중을 받는 부재의 소성 범위를 고려한 SDOF 해석의 수정계수를 개발하였다. SDOF 해석의 수정계수는 MDOF 해석 결과 값을 비교하여 도출하였다. SDOF 해석에 영향을 미치는 매개변수로 부재의 경계조건, 폭발 하중 지속시간과 고유주기 비를 선정하였다. 수정계수는 탄성 하중-질량 변환 계수를 기준으로 산정하였다. 수정계수 곡선은 상한, 하한 매개변수 경계 사이에 있도록 타원 방정식을 이용하여 도출하였다. 서로 다른 단면과 경계조건을 가지는 예제에 수정계수를 적용한 결과 SDOF 해석의 오차율이 15%에서 3%로 감소하였다. 본 연구의 결과는 수정계수를 적용하여 SDOF 해석의 정확도를 높임에 따라 폭발 해석에 널리 활용될 수 있다.

• 한국해안·해양공학회논문집
• /
• 제30권5호
• /
• pp.223-233
• /
• 2018

본 연구에서는 동해안의 너울성 고파랑 예측하기 위해 기상청 현업 예보 바람자료를 입력장으로 하여 파랑수치모델(SWAN)을 수립 및 최적화하고 동해안 동계 파랑의 예측 재현도를 평가하였다. 파랑 모델은 연안역에서의 파랑 변형을 모의하기 위해 네스팅 기법을 적용하였으며, 백파 에너지 소산항을 개선하여 너울성 파랑을 모의하였다. 수치실험을 위한 입력 바람장으로는 기상청 현업 기상예보모델인 RDAPS 및 LDAPS 자료를 사용하였다. 모의된 파랑에 대한 정확도 비교 평가를 위해 ECMWF 재분석 바람자료와 KIOST 운용해양시스템의 WRF 예측 바람자료를 이용한 파랑모델링 및 기상청 현업 파랑예보모델 결과와 연안 및 외해 4개 관측정점의 파랑 관측자료를 이용하였다. 기상청 현업 기상예보모델을 입력바람장으로 이용한 경우 연안에서는 유의파고, 첨두주기 및 평균 파향이 모두 가장 낮은 RMSE와 가장 높은 상관계수를 가졌으며, 외해에서는 모든 수치실험 결과가 관측자료와 전반적으로 잘 일치하였다. 백파항을 수정한 SWAN 모델과 기상청 현업 기상예보모델을 사용할 경우 급격하게 발생하는 고파랑 재현은 개선이 필요하지만 비교적 겨울철 폭풍파를 잘 재현하고 있다.

• 대한토목학회논문집
• /
• 제11권1호
• /
• pp.177-188
• /
• 1991

해빈변형(海濱變形)은 주로 파랑(波浪)과 흐름의 작용을 받아 표사이동(漂砂移動)에 의하여 생긴다. 본 연구(硏究)는 표사이동이 주로 발생되는 천수역(淺水域)에서 해빈변형을 예측(豫測)할 수 있는 3차원(次元) 해빈변형(海濱變形) 수식모형(數式模型)을 개발(開發)하였다. 파랑변형(波浪變形)은 흐름과 파랑이 공존(共存)하는 경우의 모형을 개발하였고 흐름조건은 이안류(離岸流)가 존재하는 경우를 상정(想定)하였으며, 표사량(漂砂量) 산정식(算定式)은 Flux모형(模型)을 사용하였다. 본(本) 연구(硏究)의 모형을 일정(一定) 구배를 가진 해빈(海濱)에 적용해 본 바, Watanabe의 수치해석 결과와 정성적(定性的)으로 유사한 결과를 얻었으며, 해안구조물(海岸構造物)이 있는 경우에 해빈류(海濱流)의 계산이 가능한 해역(海域)에서는 본(本) 모형(模型)의 적용이 가능할 것으로 판단된다. 매개변수(媒介變數)들이 해빈변형에 미치는 영향은 입사파고(入射波高)가 클 때, 흐름이 강할 때, 저질입경(低質粒徑)이 작을 때, 해저(海低) 구배가 클 때 큰 것으로 나타났다.