• 제목/요약/키워드: Water reuse system

검색결과 186건 처리시간 0.027초

석유화학공장 방류수내 난분해성 유기물의 Fenton 산화처리 (Fenton난s Reagent Oxidation of Refractory Organics in Petrochemical Plant Effluent)

  • 이규훈;정대영;박태주
    • 한국환경과학회지
    • /
    • 제5권1호
    • /
    • pp.51-59
    • /
    • 1996
  • The purpose of this study was to evaluate the partial oxidation of the biological treatment plant effluents using Fenton's reagent as a pretreatment step prior to a tertiary biological oxidation of these effluents. Fenton's reagent was evaluated as a pretreatment process for inhibitory or refractory organics. Based on the Fenton oxidation system, the petrochemical wastewater treatment plant effluent was shown to have significant improvement in toxicity after oxidation with hydrogen peroxide. For example, at ranee of 42 ∼ 184 mg/L COD of petrochemical plant effluents, the COD removal efficiencies were from 38.2% to 60.1% after reaction with hydrogen peroxide 200 mg/L and Fe2+ 100 mg/L and reaction time was 30 minutes. The total TOC reduction were about 15.8∼22.4% with same test condition and difference between the overall removal rate and BOD/COD ratio after Fenton's oxidation estabilished in the biodegradation and otherwise meets the discharge standard or reuse for cooling tower make-up water.

  • PDF

바이오플락 기반 아쿠아포닉스 시스템 개발에 의한 뱀장어(Anguilla japonica)와 재배작물의 성장에 미치는 영향 (Effect on Eel Anguilla japonica and Crop Growth by the Development of a Biofloc Technology (BFT) Aquaponic System)

  • 황주애;이정호;박준성;최종렬;이동길;김형수
    • 한국수산과학회지
    • /
    • 제54권4호
    • /
    • pp.418-425
    • /
    • 2021
  • The effects of an aquaponic system based on biofloc technology (BFT-AP) were analyzed for eel Anguilla japonica as aquaculture species and caipira Lactuca sativa as the cultivated crops. The rate of weight gain rate by the eels was 178% (BFT-AP 200 head) > 136% (BFT-AP 100 head) > 100% (BFT). The eel body weight in the BFT-AP (200 head) significantly increased when compared to the BFT only eel group (P<0.05). The weight of the upper layer of caipira was 91±8.5 g (200 head) > 90±8.9 g (100 head) > 48±8.3 g (Hydroponic crop, HP). The crop growth in all BFT-AP groups was higher than the control, the hydroponic group. The total ammonia nitrogen (TAN) and NO2--N concentrations decreased in the BFT-AP group when compared to the BFT group. It was possible to remove nitric acid from the aquaponics system and reuse it as eel rearing water. Although some nutrient concentrations were low in BFT when compared to HP, the nutrient concentration was sufficient for plant growth. The results show that BFT has the potentially to provide a sustainable aquaponic system.

모형 재이용관을 이용한 하수재이용수의 부식 및 수질영향 연구 (Characteristics of Corrosion and Water Quality in Simulated Reclaimed Water Distribution Pipelines)

  • 강성원;이재영;이현동;김지은;곽필재
    • 대한환경공학회지
    • /
    • 제34권7호
    • /
    • pp.473-479
    • /
    • 2012
  • 하수재이용은 부족한 수자원 문제를 해결할 수 있는 대표적인 대안으로 주목을 받고 있다. 본 연구에서는 하수재이용수의 공급시 관망내에서 일어날 수 있는 관의 부식과 수질변화에 대한 연구를 모형관망을 이용하여 수행하였다. 관 재질은 아연도강관(GSP), 주철관(CIP), 스테인레스강관(STSP), PVC관(PVCP)을 이용하였고, 하수재이용수와 수돗물을 각각 공급하여 비교 및 평가하였다. 하수재이용수를 모형관망에 공급하는 루프테스트를 수행한 결과, 관 재질별 시편의 무게 감소량은 CIP > GSP > STSP ${\approx}$ PVCP의 순으로 나타났다. 또한, 하수재이용수는 수돗물과 비교하여 부식속도가 높게 나타났는데, CIP의 경우, 하수재이용수의 초기 부식속도가 3.511 mdd, 수돗물은 2.064 mdd를 나타내었고, 90일간의 부식속도는 하수재이용수 0.833 mdd, 수돗물 0.294 mdd를 나타내었다. 또한, GSP도 하수재이용수의 초기 부식속도가 2.703 mdd, 수돗물은 2.499 mdd를 나타내었고, 90일간의 부식속도는 하수재이용수 0.349, 수돗물 0.248 mdd로 CIP에서 나타난 경향과 유사하였으며, 시간이 지남에 따라 부식속도가 감소하는 경향을 나타내었다. 루프테스트를 수행하는 과정에서 관 재질별로 하수재이용수의 수질변화를 관찰한 결과, 암모니아성 질소의 경우, 부식이 크게 발생한 CIP 및 GSP에서 부식이 발생하지 않은 STSP 및 PVCP와 비교하여 질산염으로 전환되는 비율이 월등히 높았고, 부식생성물이 가장 많은 CIP에서 질산성 질소의 탈질이 가장 높게 일어나는 현상을 관찰할 수 있었다. 또한, CIP에서는 SRB (Sulfur Reducing Bacteria)에 의한 황산이온의 소모가 나타났으며, EDS (Energy Dispersive X-ray spectrometer System) 분석 결과 MIC (Microbiologically Induced Corrosion)가 있었음을 확인할 수 있었다.

프라이 오토(Frei Otto)의 건축에 나타난 생태학적 공간특성에 관한 연구 (A Study on the Charactertics of Ecological Architectural Space of Frei Otto)

  • 최경실
    • 한국실내디자인학회논문집
    • /
    • 제11호
    • /
    • pp.45-56
    • /
    • 1997
  • In the process of modermization the problem of environment destruction has become a worldwide issue. And now this problem is a concern for all branches of science, including that of architectural desigv. This thesis tries to find the meaning of ecological architectural space, one that encreases the organic relationship, and communication, between architectrual space and urban environmental space, between human beings and architecture, and between human beings and their environment. As an example, we will take a look at the architectural space-design of Frei Otto, who offers diverse creative ecological architectural forms. His concept of architecture has the critical character when compared with the traditionan conventional concept of architecture. The ecological characteristics of his architectural spacedesign can be summarized as follows: The first characteristic is his ample use of natural objects in the architectural structure. An ample use of living things like trees and plants as well as of inanimate thing like water, wind as architectural elements enhances the functional efficiency of architecture. The second characteristic is its ecological architectural system, which saves energy faciliates ventilation by changing the position and direction of the building, by systematically applying the materials, and by efficiently arranging the inner space. The third characteristic is the dematerialization of architecture and the use of materials that are economical and appropriate for the circulation system of nature. The use of natural elements and recycling natural objects, makes it possible to reuse materials of the destroyed building. In short, the ecological architecture of Frei Otto, which shows the relation between human beings and architecture, presents diverse possibilities of the archtectural space as a complex natural system, which is more than a simple combination of separatge elements.

  • PDF

리튬이온전지 양극제조 공정에서 사용된 NMP를 회수하기 위한 하이브리드형 NMP 회수시스템 개발에 관한 연구 (Study on the Development of Hybrid NMP Recovery System for Recovering the Used NMP in Lithium Ion Battery Cathode Manufacturing Process)

  • 황순호;남승백;김동권;김양준;강성은
    • 대한기계학회논문집B
    • /
    • 제40권5호
    • /
    • pp.289-296
    • /
    • 2016
  • 리튬이온전지 양극활물질 제조공정의 용제로 사용되는 NMP(N-Methyl-2-Pyrrolidinone)는 전량수입에 의존하고 있으며 BASF와 ISP의 독과점에 따라 높은 가격을 유지하고 있다. 이로 인해 대부분의 리튬이온전지 제조업체들은 건조과정에서 배기되는 공기 중에서 NMP를 회수한 후 재사용하는 방식을 이용하고 있다. 국내에서는 주로 NMP의 친수성을 이용해 흡수탑에서 회수하는 흡수법을 사용한다. 이 방식으로 회수된 NMP의 순도는 80% 수준이며, 처리된 가스의 수분 함유량이 높아 100% 배기할 수밖에 없는 문제점이 있다. 본 연구에서는 냉각응축법과 농축법을 복합 구성하여 NMP 회수율이 99.6%, 회수된 NMP 순도가 96.1%인 하이브리드형 NMP 회수시스템을 개발하였다.

지방자치단체 지리정보시스템에서 재사용을 위한 응용 서비스 컴포넌트의 설계 및 구현 (Design and Implementation of Application Service Component for Reuse in Local Government's GIS)

  • 김광수;조대수;김도현;최혜옥
    • 한국공간정보시스템학회 논문지
    • /
    • 제3권1호
    • /
    • pp.75-87
    • /
    • 2001
  • 컴포넌트 소프트웨어의 가장 큰 장점은 응용 소프트웨어사이의 컴포넌트 재사용이다. 본 논문에서는 컴포넌트 재사용의 장점을 지리정보시스템 분야에 접목하여 지방자치단체에서 지리정보시스템을 빠르고 효과적으로 구축하기 위한 컴포넌트의 설계와 구현 방법을 설명하였다. 구현된 컴포넌트는 응용 서비스 컴포넌트로 부산시에서 1999년도에 수행한 사업과 1999년과 2000년에 개방형 GIS 컴포넌트 S/W 개발 과제의 결과물을 기반으로 지방자치단체에서 수행하는 서로 다른 업무 사이에 공통적으로 적용 가능한 기능을 도출하여 구현하였다. 분석 대상이 된 업무는 지방자치단체에서 지리정보시스템으로 구축하는 빈도가 높은 상수도관리 업무, 하수도 관리 업무, 도로 관리 업무, 도시 계획 업무, 지적 관리 업무이다. 분석 과정을 통하여 5개의 업무들 사이에 11개의 공통 기능을 추출하였으며 이 중 7개의 기능을 5개의 응용 서비스 컴포넌트로 구현하였다. 구현된 컴포넌트는 Authority, GISReport, MapService, SymbolManager, AttributeDisplay등 5개로써 사용자 관리, 측정, 검색, 출력, 인덱스 창, 심볼 관리, 속성 정보 표현, 출력 등의 기능을 수행한다.

  • PDF

하수2차처리수의 재이용을 위한 후탈질공정의 평가 (Performance Evaluation of Tertiary Post-denitrification Processes for the Reuse of Secondary Effluent from Wastewater Treatment Plant)

  • 이찬호;윤주환;이윤석;이한샘;안동근
    • 한국물환경학회지
    • /
    • 제23권5호
    • /
    • pp.642-649
    • /
    • 2007
  • The effectiveness of add-on tertiary treatment processes for the polishing of the effluent of a biological nutrient removal (BNR) system from a modified $A^2/O$ process has been examined under the field condition with pilot-scale plants. The add-on treatment processes of 1) combined biofilm anoxic reactor and sand filtration, and 2) two-stage denitrification filter had been operated with various operating conditions. The experimental results indicated that two-stage denitrification filter could produced a better polished tertiary effluent. Filtration rate of $150m^3/m^2{\cdot}d$ for the 2-stage denitrifying filter could decrease the nitrate removal probably due to shorter detention time that caused insufficient reaction for denitrification. Two stage denitrification filter operated with M/N ratio of 3.0 and filtration rate of $100m^3/m^2{\cdot}d$ produced the tertiary effluent with nitrate and SS concentraitons of 2.8 mg/L and 2.3 mg/L, respectively. When the operating temperature reduced $30^{\circ}C$ to $18^{\circ}C$, $NO_3{^-}-N$ removal efficiency decreased from 73% to 68%.

UML과 RUP를 이용한 UIS 컴포넌트 모델링 (Modeling of UIS Components using UML and RUP)

  • 조혜경;유철중;장옥배;김영섭
    • 한국정보과학회논문지:소프트웨어및응용
    • /
    • 제27권7호
    • /
    • pp.742-758
    • /
    • 2000
  • 국내의 각 지방자치 단체들은 그들의 업무를 전산화하기 위해 현재 다양한 UIS(Urban Information System)들을 개발하고 있다. 그러나, 그들은 기존에 개발된 다른 지방자치 단체들의 UIS들을 재사용하지 않고 있어 그들의 UIS 개발에 너무 많은 비용을 사용하고 있다. 이것은 중앙정부가 중복적인 투자를 하게하는 원인이 된다. 몇몇 지방 자치단체의 업무는 다른 지방자치 단체들의 업무와 매우 유사하다. 이 논문은 그 중복투자 문제에 대한 해결책을 제안한다. 그 문제 해결을 위해 지방자치 단체들이 Unified Modeling Language과 컴퍼넌트 기반 개발 프로세스를 이용하여 한 도시의 업무를 모델링할 것을 제시한다. 그들은 또한 기존의 모델로부터 UIS를 개발할 수 있고 다른 지방자치 단체들이 그 개발된 UIS를 재사용할 수 있다. 이 연구에서는 한 예로 P시의 상수도 업무를 사용하며 컴포넌트 기반 개발 프로세스로 Rational Unified Process를 이용한다. 본 논문은 상수도 업무에 대한 컴포넌트 기반 개발 프로세스의 적용과 재사용 가능한 업무모델/분석모델/설계모델의 구축 및 ActiveX 컨트롤 형태의 소프트웨어 컴포넌트 개발 방법을 기술한다.

  • PDF

비료제조업의 국내와 EU 최적가용기법 기준서 비교·분석 (Comparative Analysis of Best Available Techniques Reference Documents on the Fertilizer Manufacture between Korea and European Union)

  • 서경애;김가희;김은석;석희정;신수정;김영란;강필구
    • 한국환경과학회지
    • /
    • 제29권3호
    • /
    • pp.307-318
    • /
    • 2020
  • The integrated permit system is applied to class 1 and 2 atmospheric and water pollutant discharge facilities in 19 sectors. The fertilizer sector should receive a permit for a period of four years, from 2019 to 2023. The purpose of this study is to investigate the differences between the Korean Best Available Techniques (BAT) reference document (K-BREF) and the European Union BAT reference document (EU-BREF) in terms of the process and emission characteristics of fertilizer manufacture. K-BREF is written by focusing on products, whereas EU-BREF is produced on focusing on manufacture process. There are five types of BATs(best available techniques economically achievable) in Korea. These BATs selected mainly to recover and reuse raw meterials and save energy. The number of BATs and BAT-AELs(BAT associated emission level) in K-BREF is smaller than that in EU-BREF. We suggest that BATs and those environmental management parameters in Korea need to further reflect the emission characteristics in the fertilizer sector.

바이오플락과 아쿠아포닉스를 이용한 도심형 양식시스템에서의 메기양식 (Urban aquaculture of catfish, Silurus asotus, using biofloc and aquaponics systems)

  • 김석렬;장진우;김범주;장인권;임현정;김수경
    • 환경생물
    • /
    • 제37권4호
    • /
    • pp.545-553
    • /
    • 2019
  • 도심형 양식시스템을 바이오플락 양식기술과 아쿠아포닉스 배양대로 구성하여 사육수를 교체하지 않고 메기를(사육조 3.3톤 2개) 양성한 결과 151일의 사육 후 2.8 g의 종묘가 평균 무게 171.3 g (총중량 56.53 kg)과 235.5 g (총중량 71.1 kg)로 성장하였다. 입식에서 수확까지의 누적 생존율은 65% 보였고, 성장 구간별로 입식에서 1차 성장 후 분조 이전까지 77.7%, 분조 이후 생존율은 수조에 따라 차이를 보여 각각 92.9%와 78.0%로 나타났다. 초기 바이오플락 사육수가 만들어지는 과정에서 일부 폐사가 발생하였고, 수질이 안정된 이후에는 폐사가 감소하였다. 메기의 혈액분석결과 사육초기 BFT 사육수가 안정화 이전인 4월에 간 손상 지표인 AST의 농도가 유의적으로 높은 값을 보였으며 ALT, triglyceride는 전 사육기간 내에 차이가 없었다. Glucose, cholesterol, total protein은 7월에 유의적으로 높은 값을 보이고 다른 기간에는 차이가 없었다. 메기 사육수를 이용한 아쿠아포닉스 가동 시 생산된 식물은 상추, 바질, 적근대, 적치커리 등이 원활한 성장을 보여 5개월간 총 148.85 kg의 식물을 수확하였다. 또한 아쿠아포닉스 시스템에서 식물재배에 따른 사육수 내의 질산 제거능력과, 질산이 제거된 사육수는 메기 사육수로 재사용이 가능한 것으로 확인되었다. 결론적으로, 본 연구에서는 도심형 양식시스템으로 물을 교환하지 않고 어류를 양식할 때 사육수에 축적된 질산을 제거하고 재사용이 가능한가를 아쿠아포닉스 기술을 결합하여 연구하였으며, 양식생물(메기) 수용량에 따른 적정 식물량을 유지하면 농수산 복합양식이 가능하다는 것을 보여주었다.