• Applied Chemistry for Engineering
• /
• v.22 no.5
• /
• pp.508-513
• /
• 2011

Hemp is known as one of the most productive and useful plants, which grows quickly in a moderate climate with only moderate water and fertilizer. Traditionally in Korea, hemp bast is used to natural fibres, and remaining such as stem and root is treated as waste. Those of hemp by-products can be transformed to bio fuel such as bio-oil and activated carbon. To understand pyrolysis characteristics, thermogravimetric analysis were carried out in TGA, in which hemp by-products were mostly decomposed at the temperature range of $270{\sim}370^{\circ}C$. The corresponding kinetic parameters including activation energy and pre-exponential factor were determined by differential method over the degree of conversions. The values of activation energies for pyrolysis were increased as the conversion increased from 10 to 90%.

• The Korean Journal of Food And Nutrition
• /
• v.33 no.6
• /
• pp.666-671
• /
• 2020

To analyze the quality characteristics of soybean (Glycine max), the approximate analysis, physical properties, mineral and free sugar content of domestic soybean cultivars were analyzed. The moisture content was about 9.15~11.84%. The fat content of Cheonga, Taekwang, and Jinpung cultivars were 17.93~18.37%, which was significantly higher than that of others. Protein content of Cheonga and Seonyu were 36.15~36.70%, significantly higher than that of others. As for the weight and shape of soybeans, the Daewon was the largest allele, and the seed cover ratio was the highest in the Seonyu. In terms of water absorption rate, the Seonyu showed the highest absorption rate at 246.19%, and the Daewon showed the lowest absorption rate. Soaked soybeans had a hardness of 2.80~4.73 kg/㎠, which did not show low hardness in the sample with high moisture absorption. The grinded soybeans showed higher lightness and yellowness values than the raw soybeans, and the redness was decreased. Soybean minerals contained high K, P, Mg, and Ca content. Overall, The Taekwang contained more minerals than others. Stachyose, sucrose, glucose and fructose were detected as free sugars in soybeans. The total free sugar content of Taekwang was the lowest at 3.47%, and the Cheonga (6.80%) was the highest.

• Journal of the Korea Society of Computer and Information
• /
• v.27 no.3
• /
• pp.239-249
• /
• 2022

This study aims to analyze and compare the activating factors of domestic and overseas scuba diving resorts. Our delphi survey was conducted three times in 30 experts who involved in operation and management including scuba diving resort management representative and training team leader. As a result of comparing the activating factors at domestic versus overseas, it was found that common important activating factors included expansion of convenient facilities at public diving places, installation of safety and medical facilities for divers, development of first aid system including AED and oxygen ventilator, requirement of convenient facilities such as water lift and toilet in diving boat, installation of diving boat screw safety system, local boat operation guideline, regular course training program for scuba diving, employment of professional scuba diving instructor and guide, communication and promotion through various SNS portals, promotion by divers' word of mouth, involvement in regional Diving Resort Association, involvement in Korean Diving Association, communication and mutual benefit with local fishing villages, and linkage policy with local tourism industry.

• Membrane Journal
• /
• v.32 no.2
• /
• pp.100-108
• /
• 2022

Among various industries, the textile industry uses the largest amount of water for coloring textiles which leads to a large amount of wastewater containing various kinds of dye. There are various methods for the removal of dye such as flocculation, ozone treatment, adsorption, etc. But these processes are not much successful due to the issue of recycling which enhances the cost. Alternatively, the membrane separation process for the treatment of dye in wastewater is already documented as the best available technique. Polymeric membrane and ceramic membrane are two separate groups of separation membranes. Advantages of ceramic membranes include the ease of cleaning, long lifetime, good chemical and thermal resistance, and mechanical stability. Ceramic membranes can be prepared from various sources and natural materials like clay, zeolite, and fly ash are very cheap and easily available. In this review separation of wastewater is classified into mainly three groups: ultrafiltration (UF), microfiltration (MF), and nanofiltration (NF) process.

• Journal of Korea Port Economic Association
• /
• v.37 no.4
• /
• pp.51-70
• /
• 2021

This study measured the environmental efficiency of 21 international airports based on sustainability reports issued by each airport for 2018. As many sectors in the industry paid attention to social and environmental responsibilities, airport operators comprise one of the leading sectors that streamlined their facilities to become increasingly sustainable and environmental. Nevertheless, studies on the environmental operations of airports are insufficient compared with studies on economic or operational efficiency. Therefore, the current study aims to determine any possible improvement in the environmental inefficiency of airports with the utilization of directional distance function (DDF) and to examine operational efficiency with the application of the data envelopment analysis (DEA). The majority of airports have operated their facilities efficiently, but not all have effectively managed pollutants generated by airports. Furthermore, many airports can still potentially reduce CO₂ and water consumption. This study suggests several implementable environmental improvements to the aviation sector. Moreover, other industrial sectors may use the research as a benchmark for enhancing environmental efficiency.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.9 no.4
• /
• pp.413-418
• /
• 2021

In this study, as a basic study to use recycled limestone powder as a secondary product mixture for concrete, it was found that the compressive and flexural strengths were equal to or slightly improved compared to Plain up to 10% and 20% of the RLP mixing ratio, but the strength was rather decreased at 30% mixing. As a result of the heat of hydration experiment, as the RLP mixing rate increased, the heat of hydration decreased, and the elapsed time of the maximum heat was also delayed. As a result of the drying shrinkage test, as the fine powder RLP filled the internal pores of the cement mortar, the drying shrinkage decreased as the mixing rate increased. The compressive strength, water absorption rate, and compressive strength after freezing and thawing of the concrete block mixed with RLP 20% all satisfied the group standard criteria of the Korea Concrete Industry Cooperative Federation, confirming the possibility of use as a mixed material.

• Journal of the Korean Applied Science and Technology
• /
• v.39 no.5
• /
• pp.632-643
• /
• 2022

Although probiotics have been shown to improve health when consumed, recent studies have reported that they can cause unwanted side effects due to bacterial-human interactions. Therefore, the importance of prebiotics that can form beneficial microbiome in the gut has been emphasized. This study isolated and identified bacteria capable of producing biopoymer as a candidate prebiotic from traditional fermented foods. The isolated and identified strain was named WCYSK01 (Wissella sp. strain YSK01). The composition of the medium for culturing this strain was prepared by dissolving 3 g K₂HPO₄, 0.2 g MgSO₄, 0.05 g CaCl₂, 0.1 g NaCl in 1 L of distilled water. The LMBP(low molecular weight biopoymers) produced when fermentation was performed with sucrose and maltose as substrates were mainly consisted of DP3 (degree of polymer; isomaltotriose), DP4 (isomaltotetraose), DP5 (isomaltopentaose), and DP6 (isomaltoheptaose). The optimization of LMBP (low molecular weight of biopolymer) production was performed using the response surface methodology. The fermentation process temperature range of 18 to 32℃, the fermentation medium pH in the range of 5.1 to 7.9. The yield of LMBP production by the strain was found to be significantly affected by q fermentation temperature and pH. The optimal fermentation conditions were found at the normal point, and the production yield was more than 75% at pH 7.5 and temperature of 23℃.

• Ocean Systems Engineering
• /
• v.12 no.2
• /
• pp.225-245
• /
• 2022

More and more shipping containers are falling into the sea due to bad weather. Containers lost at sea negatively affect the shipping line, the trader and the consumer, and the environment. The question of locating and recovering dropped containers is a challenging engineering problem. Model-testing of small-scaled container models is proposed as an efficient way to investigate their falling trajectories to salvage them. In this study, we first build a standard 20-ft container model in SOLIDWORKS. Then, a three-dimensional (3D) geometric model in the STL (Standard Tessellation Language) format is exported to a Stratasys F170 Fused Deposition Modeling (FDM) printer. In total, six models were made of acrylonitrile styrene acrylate (ASA) and printed for the purpose of testing. They represent three different loading conditions with different densities and center of gravity (COG). Two samples for each condition were tested. The physical models were dropped into the towing tank of University of New Orleans (UNO). From the experimental tests, it is found that the impact of the initial position after sinking can cause a certain initial rolling velocity, which may have a great impact on the lateral displacement, and subsequently affect the final landing position. This series of model tests not only provide experimental data for the study of the trajectory of box-shape objects but also provide a valuable reference for maritime salvage operations and for the pipeline layout design.

• Advances in nano research
• /
• v.12 no.5
• /
• pp.457-465
• /
• 2022

The potentials of Ni_xZn_1-xFe₂O₄ (x = 0.0, 0.2, 0.4, 0.6, 0.8 and 1.0) nanoadsorbents were investigated for removal of Cd and Cr from contaminated water from an electroplating industry in Himachal Pradesh, India. Optimal values were recorded under batch adsorption experiments performed to remove dissolved heavy metal ions from industrial wastewater. The specific surface area (SSA) of nanoadsorbents perceived to vary in a range 35.75-45.29 cm²/g and was calculated from the XRD data. The influence of two operating parameters, contact time and dopant (Ni) concentration was also investigated at pH ~7 with optimum dosage. Kinetic studies were conducted within a time range of 2-10 min with rapid adsorption of cadmium and chromium ions onto Ni_0.2Zn_0.8Fe₂O₄ nanoadsorbents. Pseudo-second-order kinetic model was observed to be well fitted with the adsorption data that confirmed the only existence of chemisorption throughout the adsorption process. The maximum adsorption efficiency values observed for Cd and Cr were 51.4 mg/g and 40.12 mg/g, respectively for different compositions of prepared series of nanoadsorbents. The removal percentage of Cd and Cr was found to vary in a range of 47.7%-95.25% and 21%-50% respectively. The prepared series of nanoferrite found to be suitable enough for adsorption of both heavy metal ions.

• Tunnel and Underground Space
• /
• v.32 no.6
• /
• pp.411-434
• /
• 2022

In deep geological disposal concept for spent nuclear fuel, it is well-known that rock mass at near-field experiences the thermal-hydraulic-mechanical (THM) coupled behavior. The mechanical properties of rock changes during the coupled process, and it is important to consider the changes into the analysis of numerical simulation and in-situ tests for long-term stability evaluation of nuclear waste disposal repository. This report collected the previous studies on indirect coupled behaviors of rock. The effects of water saturation and temperature on some mechanical properties of rock was considered, while the change in hydraulic conductivity of rock due to stress was included in the indirect coupled behavior.