• Journal of the Korean Society of Food Science and Nutrition
• /
• v.30 no.2
• /
• pp.299-306
• /
• 2001

As a part of basic investigation for utilization of canned food processing by-products, a food components of the canned oyster processing waste water such as boiled and released water(BRW), wash water(WW) were investigated and compared with hot-water extracts from oyster. From the results of measuring heavy metal conte수, viable cells and coliform group, the canned oyster processing waste waters might not invoke health risk in using food resource. The contents of taste compounds (free amino acids, ATP related compounds, TMA (O) and total creatinine) of BRW and WW accounted for about 254% and 95%, respectively, in comparison with those of control (hot-water extract from oyster). The BRW showed a very high content of salt in comparing to the WW and control. In descending order, the values of whiteness index was WW, control and BRW. Sensory scores for color, oyster flavor intensity and saline taste were not significantly different between WW and control. But, BRW had the highest score in oyster flavor intensity, while had the lowest score in color and saline taste. But, the color and saline taste of BRW might be able to control by some pretreatment (concentration and drying in mild condition, desalination and recipe control etc). These results indicated that BRW and WW generated from various step during canned oyster processing could be a potential food resource by controlling of saline taste and color intensity.

• Journal of the Korean Home Economics Association
• /
• v.34 no.5
• /
• pp.183-196
• /
• 1996

The purposes of this study were to review the effects of textiles production on the environment, and to investigate the environmental consciousness and environmental preservation behavior of textile producers. This study was conducted by reference analysis and empirical research. To develope theoretical framework of dimensions of environmental behavior, references concerned were analyzed. And for empirical study, researcher developed a questionnaire based on the free writing by producers and references. The questionnaire included problems about environmental consciousness, environmental behavior, demographic variables, and environmental variables. 135 questionnaires were used for final data analysis. ANOVA and factor analysis were used. The results were as follows: First, the level of global environmental problem consciousness was relatively high. The conscious level of water pollution caused by the waste water from textile mills was the highest, and that of desertation of mountain caused by timber cutting was the lowest. The effects of textile dyers and finishers on the environment were the highest, and that of designers were the lowest. Second, the results of reference analysis showed that the dimensions of textile producers environmental behavior were resource and energy saving, solid waste reduction, and green product production. And the results of empirical study were resource and energy saving, resource reuse or recycling, solid waste reduction, and green product production, and total variances was 62.3%. The practice was the lowest. Third, global environment problem consciousness, environment problem consciousness caused by the textile life-cycle concerned, and clothing seperate-collection or not at residing place were effective on environmental behavior, and 52.45% of environmental behavior was explained with above variables.

• Environmental Engineering Research
• /
• v.20 no.2
• /
• pp.121-125
• /
• 2015

Biohydrogen production from food waste via dark fermentation was conducted by using mixed culture under various environmental conditions (initial pH, initial F/M ratio, initial ferrous iron ($Fe^{2+}$), and temperature condition) in batch reactor. The results revealed that the maximum hydrogen yield of $46.19mL\;H_2/g\;COD_{add}$ was achieved at the optimal conditions (initial pH 8.0, initial F/M ratio 4.0, initial iron concentration 100 mg $FeSO_4/L$ and thermophilic condition ($55{\pm}1^{\circ}C$)). Furthermore, major volatile fatty acid (VFA) productions of butyrate (765.66 mg/L) and acetate (324.69 mg/L) were detected and COD removal efficiency was detected at 66.00%. Therefore, these optimal conditions could be recommended to operate a system.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2008.10a
• /
• pp.1456-1462
• /
• 2008

This study conducted a direct shear test to evaluate friction properties on contact surface of waste resources including turban shell, gastropod shell and PET bottle film. The contact surface that was considered for computation of shear strength in contact surface were turban shell/turban shell, gastropod shell/gastropod shell, and PET bottle film/PET bottle film. As a result of test, friction angle was found to be $16.7^{\circ}$ for contact surface of turban shell/turban shell, $35.4^{\circ}$ for gastropod shell/gastropod shell, and about $11^{\circ}$ for PET bottle film/PET bottle film. Using the results, the author aims to provide a possibility for application of waste resource in the field.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2015.05a
• /
• pp.46-47
• /
• 2015

This study has analyzed the engineering characteristics of resource-cycling mortar according to the variation of fine aggregate type using illite with high development potentials by setting the goal as developing eco-friendly construction materials. As a result, while flow has increased if recycled fine aggregate and waste refractory are used separately or mixing them adequately in case of flow and compressive strength, the flow had somewhat declined followed by illite replacement. However, the possibility of such usage is determined to be adequate if used by mixing illite, recycled fine aggregate and waste refractory properly due to the dry shrinkage effect.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.8 no.1
• /
• pp.83-89
• /
• 2000

There is no simple method to solve livestock waste problems satisfactorily. For a successful solution, various methods should be well organized orderly depending upon the situation. Even in the livestock waste management, integrated waste management principle should be applied. Minimization of livestock waste generation is the first priority. It is also important to distribute fairly livestock farms throughout the nation. Efficient management of permit system is equally important. Permit should be given only when the farmer have enough grass-land on which the farmer can apply more than two thirds of livestock waste generated or when the farm have an anaerobic digestor in which store livestock waste generated for at least 3 months. In principle, livestock waste should be treated in the farm and it is desirable to operate composting facilities in the farm site too.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.19 no.1
• /
• pp.141-160
• /
• 2021

Unit 1 of the Kori Nuclear Power Plant (NPP) and Unit 1 of the Wolsong NPP are being prepared for decommissioning; their decommissioning is expected to generate large amounts of intermediate-level, low-level, and very low level Waste. Mixed waste containing both radioactive and hazardous substances is expected to be produced. Nevertheless, laws and regulations, such as the Korean Nuclear Safety Act and Waste Management Act, do not define clear regulatory guidelines for mixed waste. However, the United States has strictly enforced regulations on mixed waste, focusing on the human health and environmental effects of its hazardous components. The U.S. Nuclear Regulatory Commission and the U.S. Department of Energy regulate the radioactive components of mixed waste under the Atomic Energy Act. The U.S. Environmental Protection Agency regulates the hazardous waste component of mixed waste under the Resource Conservation and Recovery Act. In this study, the laws, regulations, and authorities pertaining to mixed waste in the United States are reviewed. Through comparison and analysis with waste management laws and regulations in Korea, a treatment direction for mixed waste is suggested. Such a treatment for mixed waste will increase the efficiency of managing mixed waste when decommissioning NPPs in the near future.

• Spatial Information Research
• /
• v.19 no.5
• /
• pp.53-62
• /
• 2011

Recently environmental pollution and resource depletion have been rapidly progressing in the world. Construction Industries discharge tones of wastes and consumes heavy resource as compared with the production activities of other industries, so it is the main reason of increasing of the Earth's environment. In Korea, as people become aware of the need of technical and institutional infrastructure for the recycling of construction wastes, they manage Allbraro system which is Total Management System in the wastes. Therefore, they promote the handling of standardized information, processing construction waste of transparency procure and promotion of the efficiency of task about the disposal of occurrence and movement of real-time construction waste. However, objective information for dismantling building did not construct in the organization of the system, so the emission of system randomly produces and discharges information of the waste. Because of that reasons, the exact value of waste abandonment is difficult to measure and recycling after waste disposal has the limit point. Therefore, in this study, advantages and disadvantages of the existing waste management system are analyzed, and we improved solution of construction building and environment of the city when BIM / GIS are utilized.

• Korean Journal of Environmental Agriculture
• /
• v.30 no.2
• /
• pp.125-131
• /
• 2011

BACKGROUND: Reuse of waste nutrient solution for the cultivation of crops could lead to considerable conservation of water resources, plant nutrients, and water quality. Therefore, this study was conducted to evaluate the potential for reducing the use of chemical fertilizer in Chinese cabbage cultivation via the reuse of waste nutrient solution as an alternative irrigation resource. METHODS AND RESULTS: The nutrients supplied in the waste nutrient solution consisted of 1474.5, 1285.1, 991.6, and 872.6 mg/L for $K+$, ${NO_3}^-$, $Ca^{2+}$ and ${SO_4}^{2-}$, respectively. At 56 days after transplanting (DAT), the leaf length of Chinese cabbage plants irrigated with the waste nutrient solution treatment was significantly higher than that of plants irrigated using a conventional groundwater treatment. Additionally, the leaf width, fresh weight and dry weight of the plants irrigated with the waste nutrient solution were similar or greater than that of plants irrigated with a conventional treatment. Furthermore, the growth of plants treated with the waste nutrient solution +25% fertilizer was the highest among all tested treatments. CONCLUSION(s): These results indicate that the waste nutrient solution can be used as an alternate water resource for crop cultivation. In addition, it can contribute to reduce the fertilizer and to obtain the higher crop yield of Chinese cabbage.

• Resources Recycling
• /
• v.22 no.4
• /
• pp.70-80
• /
• 2013

Waste refrigerator is the most large amount of item being recycled and the recycling process is the most complicated in WEEE (Waste Electrical and Electronic Equipment) because refrigerator is biggest product and consists of various parts and materials such as ferrous, non-ferrous, and plastics. Recently, recycling process of waste refrigerator has been being more complex since large capacity 2 door refrigerators and standing Kimchi refrigerators with various material are distributed on custom market. In addition, recycling of valuable resource from waste refrigerator is mandatory by WEEEs recycling legislation; therefore, high efficiency recycling enough for economic and environment-friendly recovery of valuable resource through present technical situation analysis and comparison of recycling technologies of waste refrigerator with advanced country.