• 제목/요약/키워드: Wall Loss

검색결과 785건 처리시간 0.027초

국내 육성 황육계 키위푸르트 품종간 저장 특성 비교 (Shelf-life comparison of two Korean golden kiwifruit (Actinidia chinensis) cultivars under low temperature storage)

  • 이아연;배태민;조윤섭;황용수
    • 농업과학연구
    • /
    • 제41권4호
    • /
    • pp.265-274
    • /
    • 2014
  • Physiological characteristics of two Korean golden kiwifruit cultivars, 'Halla Gold' and 'Haehyang', were compared to determine the storage potential of fruit. The soluble solid levels of the fruit were 8.9 and 6.9 oBrix in 'Halla Gold' and 'Haehyang' at harvest, respectively but increased up to 15.4 in 'Halla Gold' and 17.5 oBrix in 'Haehyang' after 2 months of storage. Major sugars were fructose and glucose, and sucrose content was relatively low regardless of cultivar. The edible quality of 'Haehyang' was better than 'Halla Gold' because of higher amount of sugars. Firmness of the fruits gradually decreased as the increase of storage period in 'Halla Gold' in both flesh and core tissue. Th firmness loss of 'Haehyang' fruit was faster in the first 2 months and then became slow. After 75 days of storage, the firmness of 'Haehyang' fruit was only 5.2% at harvest. Core tissue was soften enough to eat at ripe stage. Wall modifying enzyme activities including xylanase, ${\alpha}$-L-arabinofuranosi-dase and ${\beta}$-galactosidase were consistently higher in 'Haehyang' and the activity of pectate lyase was more increased than 'Halla Gold' after 2 months of storage. Respiration rate of 'Haehyang' was higher than 'Halla Gold' and further increased after 2 months of storage. Weight loss was much higher in 'Haehyang' which showed higher rate of the firmness loss. The storage potential of golden kiwifruit was estimated to be about 2 months for 'Haehyang' and 3 months for 'Halla Gold' when determined on the basis of the fruit firmness.

안와파열골절 환자에서 중증 외상성 안구내 손상 발생과 연관인자 분석 (Severe Traumatic Intraocular Injuries Related to Blowout Fractures)

  • 신재훈;이미진;박성수;정원준;유연호
    • Journal of Trauma and Injury
    • /
    • 제22권1호
    • /
    • pp.97-102
    • /
    • 2009
  • Purpose: Blunt trauma can cause a wide range of ocular injuries. This study was performed to describe the prevalence of severe intraocular injuries (SIOI) and their correlation with the severity of blunt orbital trauma. Methods: We retrospectively analyzed 117 eyes of 107 patients with orbital wall fractures who visited the emergency room at Konyang University Hospital from July 2006 to June 2008. Clinical features such as age, sex, causes of injury, revised trauma score (RTS), type of orbital wall fractures were recorded. The patients were divided into two groups: blowout fracture with severe intraocular injuries (SIOI) and blowout fracture without SIOI. We compared the clinical and the injury-related characteristics between two groups and analyzed the SIOS-related factors. Results: Among the 107 patients (117 eyes) with blowout fractures, 29 (27.1%) patients with 32 eyes (25.6%) had complicated severe intraocular injuries. Retrobulbar hemorrhage (14.5%), hyphema (13.7%), traumatic optic nerve injury (4.3%), and sustained loss of visual acuity (4.3%) were the most common SIOI disorders. A logistic regression analysis revealed that loss of visual acuity (odds ratio = 4.75) and eyeball motility disorder (odds ratio=7.61) were significantly associated with SIOS. Conclusion: We suggest that blowout fracture patients with loss of visual acuity or eyeball motility disorder are mostly likely to have severe intraocular injuries, so they need an ophthalmologic evaluation immediately.

혼합형 안전주입탱크의 압력평형 예측을 위한 열손실 평가 (Analysis on Heat Loss of Hybrid Safety Injection Tank to Predict Pressure Equalizing Time)

  • 김명준;류성욱;김재민;박현식;이성재
    • 에너지공학
    • /
    • 제26권3호
    • /
    • pp.71-77
    • /
    • 2017
  • 피동고압충수용 혼합형 안전주입탱크 (Hybrid SIT)의 압력평형시간은 냉각수 주입시기를 결정하는 주요인자이다. 한국원자력연구원 (KAERI)에서는 Hybrid SIT에서의 내부 열수력적 거동을 고찰하기 위해 개별효과시험 장치를 구축하였으며, 다양한 운전조건에서의 압력평형시간에 대한 민감도 시험을 수행하였다. 개별효과시험을 통해 압력평형시간을 결정하는 주요인자들을 도출하였으며, 그 중 증기의 벽면응축 및 냉각재와의 직접접촉응축이 압력평형시간을 결정하는 주요 현상임을 파악하였다. 본 연구에서는 개별효과 시험결과들을 이용하여 각각의 응축현상들이 압력평형에 미치는 영향을 정량적으로 분석하고 혼합형 SIT의 압력평형시간을 예측하기 위한 방법론을 제시하였다.

Correlation of panoramic radiographs and cone beam computed tomography in the assessment of a superimposed relationship between the mandibular canal and impacted third molars

  • Jung, Yun-Hoa;Nah, Kyung-Soo;Cho, Bong-Hae
    • Imaging Science in Dentistry
    • /
    • 제42권3호
    • /
    • pp.121-127
    • /
    • 2012
  • Purpose: This study evaluated the association between cone beam computed tomography (CBCT) and panoramic radiographs in the assessment of a superimposed relationship between the mandibular canal and impacted third molars. Materials and Methods: The study samples consisted of 175 impacted third molars from 131 patients who showed a superimposed relationship between the mandibular canal and third molars on panoramic radiographs and were referred for the examination of the mandibular canal with CBCT. Panoramic images were evaluated for the darkening of the root and the interruption of the mandibular canal wall. CBCT images were used to assess the buccolingual position of the mandibular canal relative to the third molar, the proximity of the roots to the canal, and lingual cortical bone loss. The association of the panoramic and CBCT findings was examined using a Chi-square test and Fisher's exact test. Results: Panoramic radiographic signs were statistically associated with CBCT findings (P<0.01). In cases of darkening roots, lingual cortical bone loss or buccally positioned canals were more frequent. In cases in which the mandibular canal wall was interrupted on panoramic radiographs, contact or lingually positioned canals were more frequent. Conclusion: The results of this study suggest that contact between the mandibular third molar and canal and a lingually positioned canal could be more frequently observed in cases of the interruption of the white line of the mandibular canal and that there could be more lingual cortical loss in cases of darkening roots.

노화촉진시험법 및 TGA를 이용한 ACM 고무복합재료의 수명 예측 연구 (A Study on Life Time Prediction of ACM Rubber Composite Using Accelerated Test and Thermogravimetric Analysis)

  • 안원술;이준만;이형석
    • Elastomers and Composites
    • /
    • 제49권2호
    • /
    • pp.144-148
    • /
    • 2014
  • 자동차 엔진 부품용으로 많이 사용되는 ACM 고무 샘플에 대하여 $150^{\circ}C$, $160^{\circ}C$, $170^{\circ}C$, 및 $180^{\circ}C$의 등온상태에서 시간에 따른 압축영구줄음율(CS)과 열중량감소율을 측정하여 상관관계를 구하고, 이를 비등온 TGA를 이용하는 Toop의 해석방법에 이용하여 사용온도에서의 수명을 예측하고자 하였다. 노화촉진시험으로부터 측정된 중량감소율는 CS에 대하여 선형적으로 변화하는 것이 관찰되었으며, 이로부터 CS 40%에 이르는 시간을 재료의 수명시간으로 했을 때 중량감소에 의한 전환율은 4.2%로 나타났다. TGA 곡선으로부터 Flynn-Wall-Ozawa법에 의하여 전환율 4.2%에서의 활성화에너지는 120.2 kJ/mol로 계산되었으며, 이를 Toop의 해석법에 적용하였을 때의 예측수명은 사용온도 $120^{\circ}C$에서 약 9,700 시간으로 계산되었다.

보강재 간격 및 길이가 강성벽 일체형 보강노반의 거동에 미치는 영향 (Effects of Vertical Spacing and Length of Reinforcement on the Behaviors of Reinforced Subgrade with Rigid Wall)

  • 김대상;박성용;김기환
    • 한국지반신소재학회논문집
    • /
    • 제11권4호
    • /
    • pp.27-35
    • /
    • 2012
  • 국내에 적용되고 있는 블록식 보강토 옹벽의 전면벽체는 보강재의 고정 및 뒷채움재의 유실방지 역할을 하지만, 벽체에 작용하는 하중에 대한 역학적 기능은 부족하다. 보강토체를 구성하는 벽체에 휨 및 전단에 대한 저항 성능을 부여하기 위하여 개발된 강성벽 일체형 보강노반은 다양한 장점에도 불구하고, 기존 공법과 비교하여 경제성 및 시공성 측면에서 단점이 부각되어 현장에의 적용은 미루어져 왔다. 본 연구에서는 강성벽 일체형 보강노반의 국내 적용성 향상을 목적으로 강성벽의 성능은 확보하면서 경제성 및 시공성을 향상시키기 위한 보강재 연직 배치 간격 및 길이 변화가 보강토체 전체의 거동에 미치는 영향을 평가하였다. 이를 위하여 강성벽을 갖는 1/10 축소모형 보강토체 및 높이 3m의 실내 실대형 시험체를 조성하고, 모사 열차하중 하에서의 변형 특성을 평가하였다. 시험 결과 비록 짧은 보강재를 사용함에도 불구하고 강성벽 보강노반에서 벽체 수평 발생변위 및 침하는 허용한계 수준 이하이었으며, 보강재 연직 배치간격이 30cm에서 40cm로 증가하여도 사용성 측면에서의 성능 수준에는 큰 변화가 없는 것을 확인할 수 있었다.

적외선 열화상 분석을 통한 온실의 열손실 진단 및 평가 (Heat Loss Audit and Assessment of the Greenhouses Using Infrared Thermal Image Analysis)

  • 문종필;윤남규;이성현;김학주;이수장;김영화
    • 한국농공학회논문집
    • /
    • 제52권2호
    • /
    • pp.67-73
    • /
    • 2010
  • Unlike Urban building, horticultural facilities has a lot of heat loss through plastic or glass covering material which could be much influential to growing plant and consuming energy for heating greenhouse. In many cases, heat loss from a break of cover, a gap of joint sealing, the entrance to greenhouse and windows for ventilation are the main factors considered in calculating the heating load for horticultural facilities. however the normal observation through human eye and digital camera could not recognize where the heat loss occurred. but the infrared thermal image camera with detecting thermal difference could be very effective for noticing heat loss by analyzing infrared thermal image. In this study, greenhouse structure, covering material, internal and external provisions for Horticultural facilities were surveyed in different sites and Infrared thermal camera shooting and image analysis were performed for auditing heat loss from cultivation facilities The results from this study were that unexpected heat loss had been noticed in 7 representative cases of greenhouse such as side wall covered with single or double plastic, and the joint of horizontal thermal curtain, roof without horizontal thermal curtain, entrance to greenhouse, windows for ventilation. the most important factors for keeping heat energy were whether the horizontal thermal curtain with multifold thermal material was installed or not. The internal or external covering using multifold thermal curtain proved to be the most effective ways to keep heat energy from losing through heat transmission, heat radiation. from inside to outside the horticultural facilities.

SLD 조건에서 착빙 해석 정확도 개선을 위한 Wall-Droplet Interaction 수치 모델링 및 Deformation 모델 비교 연구 (Wall-Droplet Interaction Modeling and Comparative Study on Deformation Models for the Improvement of Icing Analysis Under SLD Conditions)

  • 배진규;이관중
    • 한국항공우주학회지
    • /
    • 제48권4호
    • /
    • pp.255-267
    • /
    • 2020
  • SLD 조건은 직경이 50㎛ 이상인 과냉각대형액적의 분포가 지배적인 결빙 환경을 뜻한다. SLD 조건에서는 액적의 큰 크기로 인해 wall-droplet interaction, deformation 등의 물리적 현상이 착빙 과정에 중요한 영향을 미친다. 그에 따라 SLD 효과를 수치적으로 모사하기 위한 다양한 연구가 수행되었고, 부착률을 수정하는 후처리 기법을 통해 wall-droplet interaction 현상을 고려하는 방법이 제안되었다. 그러나 이 방법은 액적이 충돌하는 벽면 특성을 제대로 고려하지 않는 반경험식(Wright Model)을 사용하기 때문에 착빙 영역에서 여전히 부착률과 부착 한계를 과대 예측한다. 이 문제를 해결하기 위해 본 연구에서는 착빙 영역을 세 개의 영역으로 구분하였다. 그리고 벽면 특성을 고려하는 Bai and Gosman rebound 모델을 바탕으로 개발한, 새로운 wall-droplet interaction 모델을 후처리 기법에 도입했다. 그리고 액적의 항력계수를 증가시키는 deformation 현상을 반영하기 위해 3가지 deformation 모델을 비교·분석하여 가장 적합한 모델을 선정했다. 앞의 내용을 바탕으로 개발한 SLD 결빙 예측 코드를 검증하기 위해 실험 데이터를 활용하여 해석을 수행했다. 그 결과 수정된 후처리 기법은 착빙 영역에서 rebound 현상에 의한 부착률 감소를 더욱 크게 예측하였고 부착 한계와 부착률 크기를 예측하는 데 있어 향상된 정확성을 보여줬다. 그리고 deformation에 의한 항력계수의 증가를 가장 크게 결정하는 Wiegand model이 실험과 가장 유사한 것을 확인할 수 있었다.

건설현장 RTLS 활용을 위한 전파의 벽체 투과손실에 관한 실험적 연구 (Experimental Study on Wall Transmission Loss of Electric wave for the RTLS Application of Building Construction Project)

  • 이종국;이영훈;박정현;손민지
    • 한국건축시공학회지
    • /
    • 제9권1호
    • /
    • pp.95-101
    • /
    • 2009
  • Although the concept of RTLS is very unfamiliar to construction industry, recently it is popular in other industry, such as logistics, ship building, mobile telecommunication based on state-of-the-art information technology. Effective resource management using cutting-edge information technology makes it possible to succeed a project with saving the time and cost. And effective information management in construction project can be achieved by the new technologies such as RFID, WEB-based internet, DB technology, real-time monitoring technology, etc. This paper suggest the characteristics and applicability of the international standard electric waves to be used for the real-time locating system (RTLS) on the viewpoint of transmission loss in construction field to monitor and manage resources of construction project effectively The two types of electric waves based on the international standard is to be suggested after surveying the as-is technology in the related industries and then is analyzed to find out the characteristics of those by the concept of the electric wave transition loss in the several construction situations. Two main electric waves, the 2.4GHz and the 433MHz technologies as the international standard is researched on the applicability to the indoor environment of construction site.

초소형 고체 추진제 추력기의 내탄도 성능연구 (Internal Ballistic Analysis of Solid Propellant Micro-Thruster)

  • 양준서;이종광;권세진
    • 한국추진공학회:학술대회논문집
    • /
    • 한국추진공학회 2007년도 제29회 추계학술대회논문집
    • /
    • pp.215-218
    • /
    • 2007
  • 고체추진제를 사용한 초소형 추력기의 내탄도 모델링과 성능예측에 관하여 기술하였으며, 특히 초소형화 되면서 고려해야하는 연소실 내의 열손실을 고려하였다. 추진제는 일반 HTPB-AP계열을 선택하였으며, 계산 모델은 간단한 1차원 축대칭 end-burner 모델로 정하였다. 연소실내의 화염에 노출되는 표면과 체적에 대한 비율을 변화시키면서 연소실 가스 온도, 압력, 추력을 계산하여 본 논문의 경우 열손실효과로 약 3%의 총역적 감소가 있음을 확인하였다.

  • PDF