• Korean Journal of Human Ecology
• /
• v.15 no.3
• /
• pp.449-455
• /
• 2006

We researched the comfort degree of 8 bodily parts while high school students carry out 9 different motions common to them. We observed high school students to study active effection when they are wearing Saenghwal Hanboks as a school uniform. As a result of this study, the highest degrees of comfort were recorded at standing position, walking, and upright sitting position with one's waist keeping 90 degree. On the other hand, the lowest degrees of comfort were experienced when they bend forward 45 degree and 90 degree each, and also when arms were folded across the chest. Furthermore, students reported that their buttocks, waist, and knees were comfortable during observation period, but that their backs, shoulders, and arm hole were uncomfortable throughout. In general, girls felt more comfortable than boys did, while they were wearing Saenghwal Hanbok as a school uniform.

• Journal of Fashion Business
• /
• v.10 no.5
• /
• pp.15-27
• /
• 2006

The purpose of this study is to evaluate the differences of visual image by variations in the location of the waistline and the width of the round belt of the basic pants. The stimuli are 21 samples: 7 variations of the location of the waistline and 3 variations of the width of the belt. The data has been obtained from 35 fashion design majors. The data has analyzed by frequency, factor analysis, anova, scheffe's test and the MCA method. The visual image by the location of waistline and the width of belt are composed of 3 factors : modernity, comfort and attraction factor. In these factors, modernity factor is estimated as the most important factor. The visual image is modern and attractive as the location of waist line goes down. And when the location of waist line is in the position of natural waist belt, belt of 3.2cm width is visually effective. Belt of 4.2cm width is effective except the position of natural waist belt. The interaction effects between the location of the waistline and the width of the belt have significant differences in comfort and attraction factors. As the main effect, significant differences were observed in all of the three factors according to the location of waistline and the width of belt.

• Journal of Institute of Control, Robotics and Systems
• /
• v.19 no.3
• /
• pp.233-239
• /
• 2013

This paper presents the analysis and control of the position of the COG (Center of Gravity) for a two-wheel balancing robot. The two-wheel balancing robot is required to maintain balance by driving two wheels only. Since the robot is not exactly symmetrical and its dynamics is changing with respect to moving parts, robust balancing control is difficult. Balancing performance becomes difficult when two arms hold a heavy object since the center of gravity is shifted out of the wheel axis. Novel design of a sliding waist mechanism allows the robot to react against the shift of the COG by moving the whole upper body to compensate for the imbalance of the mass as a counter balancer. To relocate the COG position accurately, the COG is analyzed by force data measured from two force sensors. Then the sliding COG mechanism is utilized to control the sliding waist position. Experimental studies are conducted to confirm the proposed design and method.

• Journal of the Korea Society of Computer and Information
• /
• v.27 no.4
• /
• pp.79-88
• /
• 2022

In order to develop a bodice prototype suitable for obese women in their 20s, this study compared and analyzed a total of five pattern system methods, including prototype of France and Japan, one prototype for education in Korea and two prototype for industries in Korea. Through this, this study attempted to investigate the bodice pattern system suitable for the development of plus-size women's clothing. For the pattern drafting, pattern 1 was applied with the most body dimensions such as interscye fold front, interscye fold back, bust circumference, neck circumference, and waist back length, and pattern 2, pattern 4, and pattern 5 were made based on bust circumference and waist back length. As a result of the appearance evaluation, Pattern 3 was evaluated as the best pattern in all items except for the suitability of the center front length and the suitability of the side waist circumference position. However, it was evaluated as inappropriate in items such as the vertical side line, the suitability of the side waist circumference line position, the suitability of interscye fold back position and shape, and the suitability of the back shoulder dart position. Most of the pattern drafting methods are based on the size of the bust circumference, but other institutional methods are considered necessary when setting the neck circumference and shoulder length for 20s obesity women. In addition, it is also required to develop a method for setting the front center length due to abdominal protrusion.

• Journal of the Korean Society of Physical Medicine
• /
• v.9 no.3
• /
• pp.243-248
• /
• 2014

PURPOSE: This study was aim to the change of muscle activities of lower extremity and waist during lifting a small object on the floor according to different foot position of women in their twenties wearing a skirt. METHODS: 9 women in their twenties wearing a skirt were selected and were measured the muscle activities of medial gastrocnemius (MG), tibialis anterior (TA), vastus lateralis (VL) and iliocostalis (IC) when they lifted a small object on the floor. The two different foot position employed were "both feet posed straight side by side" (condition 1) and "both feet posed diagonally to 45 degree" (condition 2) used. The order of feet position was selected randomly and the subject took a rest for 30 min between tests to prevent muscle fatigue. We calculated the mean and standard deviation of muscle activities and used Mann-Whitney U test to compare the difference between the two foot positions with SPSS(IBM Korea) RESULTS: The muscle activity of condition 2 was greater than that of condition 1 in right side of TA, VL, and IC and left side of TA, VL, MG and IC. The right side of TA, VL and left side VL were significant difference between condition 1 and condition 2(p<.05). CONCLUSION: We suggest "both feet posed straight side by side" position is better if a woman wearing a skirt lift the small object and it will help prevent the low back and lower limb problems in the future.

• The Research Journal of the Costume Culture
• /
• v.5 no.4
• /
• pp.130-158
• /
• 1997

This study outputs calculation of regression of each items for production of torso basic pattern according to 6 body types as the result of another study and intends to present drawing method of torso model by short measure method modified and supplied and supplied by experiments of wearing clothing. SAS(Statistical Analysis System) is used for figures management and methods for analysis used are Frequency Analysis, Means Analysis, Regression Analysis, Correlation Analysis, etc. Results are as follows. 1. Correlation analysis is used to output the size necessary for torso prototype drawing by sort measure method and waist front length, back length, crotch length, shoulder point-cerricale-shoulder point, bust circumference, waist circumference, weight, etc, are set up as representative items calculation of regression of each type is suggested. 2. In the result of experiment of the first wearing clothing intended for 5 in each type and the whole 30, to develop torso prototype drawing method by short measure method, as we find some problems of the shape and propriety of neck root circumference line, the position of shoulder point, pulling or hold armpit parts, waist circumference line, the degree of dissatisfaction is high, so the second experiment of wearing clothing is propriety of each part is improved, all items except the length and quantity of shoulder dart, waist in back bodice, clearance quantity of hip circumference, and the place of shoulder line in side bodice. So, it was modifed and supplied and then the third torso prototyped drawing method by shout measure method was suggested. The third prototype drawing method was suggested, by modifying and supplying.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.58 no.4
• /
• pp.849-856
• /
• 2009

Truncal obesity associated with insulin resistance and metabolic syndrome increase the likelihood of hypertension, various cardiovascular diseases, hyperlipidemia and coronary heart diseases. International Diabetes Federation (IDF) experts recognized that it is necessary to develop the simple diagnostic tool which is applicable to diagnose truncal obesity worldwide, and proposed the method using a waist circumference but there is a limit to estimate subcutaneous fat distribution. However, waist line is also influenced by total fat capacity less than the intra abdominal fat. The more having severe obesity, the more correlation coefficient between waist line and intra abdominal fat is low. Therefore, this thesis defines a new abdominal impedance measurement position and impedance-index to analysis central obesity. This proposes the new model to estimate abdominal obesity using the abdominal impedance-index and CT images acquired fro 160 Korean subjects. The proposed model shows that the abdominal fat distribution has a higher correlation than waist line. (Adj R2=0.809, 0.667 and 0.687 with abdominal fat area, visceral fat area and subcutaneous fat area respectively).

• Journal of the Korean Society of Costume
• /
• v.53 no.4
• /
• pp.163-176
• /
• 2003

Waist lined Coat with Pleats excavated from Byun-su(1447-1524) Tomb in Yangpyeong were very similar in size to the costume of Haeina Temple which is the oldest YosunChollik up to now YosunChollik was popularly worn in the Yuan Dynasty of China(원) and it is presumed to be flown into Korea in that period. In China, the coat with a straight collar was called ByeonseonOh , and one with a round collar was called ByeonseonOhja in the Yuan Dynasty. The excavated relics of Haeinsa Temple are almost same as ByeonseonOh. In the Myoung Dynasty(명), the coat with a straight collar was called YoseonOhja, and one with a round collar was called Round collar YoseonOhja . The Waist lined Coat with Pleats excavated in the Byunsu Tomb is same as YoseonOhja Attendants who is low in position and doctors used to wear the coat, which was spread to diverse classes by degrees. Later, even emperors and high ranking officials used to wear it as military uniforms. It was made of silk and summer cloth. As mentioned above, 1 examined its history carefully through Chinese documents and photographic materials on relics. In addition, with the authentic records of Korea and the excavated relics of the Byun-su Tomb, 1 analyzed its components. However, the analysis was very restricted because the relics to be compared with were few.

• The Research Journal of the Costume Culture
• /
• v.19 no.4
• /
• pp.820-835
• /
• 2011

The purpose of this study is to provide a basic pattern to assist in the development of formal pants that reflect the physical characteristics of women with lower-body obesity. The subjects selected for this study were women in their 20s and 30s with a Rohrer index of 1.6 or higher, a waist circumference 78.5cm to 83.5cm, and a lower drop of at least 18cm. The experimental pants patterns were developed by varying the waist line position, the waist ease, the ease in the hip area, the crotch length, the front and rear crotch width, the leg width, and the total length. Data analysis was performed using the SPSS statistics program(version 18.0). To verify the difference, this study used a variance analysis and Duncan's test. The conclusions drawn by the study are as follows. To reflect the form element of an abdomen with fatty deposits, the waist circumference should have an ease of 2cm. The front waist result was W/4+0.5cm+0.75cm and the rear waist result was W/4-0.5cm+0.25cm. The hip circumference showed a total ease of 4.5cm. The front hip result was H/4+0.75cm and the rear hip result was H/4+1.5cm. The crotch width set to H/16-1cm and the applied rear crotch width was H/16+2cm. The rear hip area was given more ease to reflect the protrusion of the hip. Along the line extending from the knee area to the crotch line, the outer seam line was designed with a gradual S-shaped curve to accommodate the protrusion from the maximum thigh width.

• Korean Journal of Applied Biomechanics
• /
• v.19 no.1
• /
• pp.179-186
• /
• 2009

This works studied to compare gas analyzer with accelerometer and the estimation of energy expenditure based on different attaching position of tri-axial accelerometer such as waist and top of the foot Based on the fact that oxygen intake increases more radically linearly during walking more than 8.0km/hr. 9 male subjects performed walking and running on the treadmill with speed of $1.5{\sim}8.5km$/hr and $4.5{\sim}13.0km$/hr, respectively. Commercially available Nike + iPod Sports kit was used to compare energy expenditure with sensor module attached to their foot. Actual energy expenditure was determined by a continuous direct gas analyzer and two multiple regression equations of walking and running mode for different attaching position were developed. Results showed that estimation accuracy of energy expenditure using waist mounted accelerometer was higher than that of the top of the foot and Nike + iPod Sports kit. Results of energy expenditure based on waist and top of the foot showed that the crossover state of energy expenditure occurred at 7.5km/hr. But Nike + iPod Sports kit could not find intersection of energy expenditure in all nine subjects. Therefore the sensor module attached to the waist and separate multi regression equation by walking and running mode was the best to estimate more accurate prediction.