• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2010년도 제39회 하계학술대회 초록집
• /
• pp.128-128
• /
• 2010

In this study, we investigated the evolution and reduction of the surface roughness during the high-speed chemical dry thinning process of Si wafers. The direct injection of NO gas into the reactor during the supply of F radicals from NF3 remote plasmas was very effective in increasing the Si thinning rate, due to the NO-induced enhancement of the surface reaction, but resulted in the significant roughening of the thinned Si surface. However, the direct addition of Ar and N2 gas, together with NO gas, decreased the root mean square (RMS) surface roughness of the thinned Si wafer significantly. The process regime for the increasing of the thinning rate and concomitant reduction of the surface roughness was extended at higher Ar gas flow rates. In this way, Si wafer thinning rate as high as $20\;{\mu}m/min$ and very smooth surface roughness was obtained and the mechanical damage of silicon wafer was effectively removed. We also measured die fracture strength of thinned Si wafer in order to understand the effect of chemical dry thinning on removal of mechanical damage generated during mechanical grinding. The die fracture strength of the thinned Si wafers was measured using 3-point bending test and compared. The results indicated that chemical dry thinning with reduced surface roughness and removal of mechanical damage increased the die fracture strength of the thinned Si wafer.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2009년도 제38회 동계학술대회 초록집
• /
• pp.392-392
• /
• 2010

In this study, high-speed chemical dry thinning process of Si wafer and evolution of surface roughness were investigated. Direct injection of NO gas into the reactor during the supply of F radicals from $NF_3$ remote plasmas was very effective in increasing the Si thinning rate due to the NO-induced enhancement of surface reaction but thinned Si surface became roughened significantly. Addition of Ar gas, together with NO gas, decreased root mean square (RMS) surface roughness of thinned Si wafer significantly. The process regime for the thinning rate enhancement with reduced surface roughness was extended at higher Ar gas flow rate. Si wafer thinning rate as high as $22.8\;{\mu}m/min$ and root-mean-squared (RMS) surface roughness as small as 0.75 nm could be obtained. It is expected that high-speed chemical dry thinning process has possibility of application to ultra-thin Si wafer thinning with no mechanical damage.

• Journal of Welding and Joining
• /
• 제26권1호
• /
• pp.12-16
• /
• 2008

본 보고에서는 3D 패키징에서 중요한 공정의 하나인 초박막 Si 웨이퍼 Thinning 공정에 대해 간략히 소개하였고, 표면처리에 대해 살펴보았다. 기계적, 특히 전기적 Damage를 줄이기 위한 최적화된 Thinning 공정과 신뢰성 분석 및 평가, 그리고 초박막 웨이퍼 핸들링 방법 등이 시스템적으로 개발되는 것이 중요하다. 칩 소형화 추세와 더불어 3D 패키징 기술이 중요시되는 산업 요구에 맞추어 향후 웨이퍼 Thinning 기술을 포함한 3D 기술의 핵심 공정기술들은 그 중요성이 증대할 것이고, 이에 대한 활발한 연구가 진행되리라 기대한다.

• 마이크로전자및패키징학회지
• /
• 제15권2호
• /
• pp.63-67
• /
• 2008

전자산업의 소형화와 경량화 추세에 맞추어 최근 집적 칩(IC)이나 패키지를 적층시키는 삼차원 집적화(3D integration) 기술 개발은 차세대 핵심기술로 중요시되고 있다. 본 연구에서는 삼차원 집적화 공정 기술 중 하나인 초박막 실리콘 웨이퍼 연삭(grinding)공정이 웨이퍼 표면에 미치는 영향에 대해서 조사하였다. 실리콘 웨이퍼를 약 $30{\mu}m$과 $50{\mu}m$ 두께까지 연삭한 후, 미세연삭(fine grinding) 단계까지 처리된 시편을 건식 연마(dry polishing) 또는 습식 애칭(wet etching)으로 표면 처리된 시편들과 비교 분석하였다. 박막 웨이퍼 두께는 전계방시형 주사전자현미경과 적외선 분광기로 측정하였고, 표면 특성 분석을 위해선 표면주도(roughness), 표면손상(damage), 경도를 원자현미경, 투과정자현미경 그리고 나노인덴터(nano-indentor)를 이용하여 측정하였다. 표면 처리된 시편의 특성이 표면 처리되지 않은 시편보다 표면주도와 표면손상 등에서 현저히 우수함을 확인 할 수 있었으나, 경도의 경우 표면 처리의 유무에 관계없이 기존의 벌크(bulk)실리콘 웨이퍼와 오차범위 내에서 동일한 것으로 보였다.

• 마이크로전자및패키징학회지
• /
• 제20권4호
• /
• pp.81-85
• /
• 2013

웨이퍼 적층 기술은 반도체 전 후 공정을 이용한 효과적인 방법으로 향후 3D 적층 시스템의 주도적인 발전방향이라고 할 수 있다. 웨이퍼 레벨 3D 적층 시스템을 제조하기 위해서는 TSV (Through Si Via), 웨이퍼 본딩, 그리고 웨이퍼 thinning의 단위공정 개발 및 웨이퍼 warpage, 열적 기계적 신뢰성, 전력전달, 등 시스템적인 요소에 대한 연구개발이 동시에 진행되어야 한다. 본 연구에서는 웨이퍼 본딩에 가장 중요한 역할을 하는 Cu CMP (chemical mechanical polishing) 공정에 대한 특성 분석을 진행하였다. 8인치 Si 웨이퍼에 다마신 공정으로 Cu 범프 웨이퍼를 제작하였고, Cu CMP 공정과 oxide CMP 공정을 이용하여 본딩 층 평탄화에 미치는 영향을 살펴보았다. CMP 공정 후 Cu dishing은 약 $180{\AA}$이었고, 웨이퍼 표면부터 Cu 범프 표면까지의 최종 높이는 약 $2000{\AA}$이었다.

• 마이크로전자및패키징학회지
• /
• 제19권4호
• /
• pp.71-78
• /
• 2012

본 논문은 기존의 미세화 경향에 대한 bumpless through-silicon via (TSV)를 적용한 웨이퍼 레벨3차원 적층기술과 그 장점에 대해 소개한다. 3차원 적층을 위한 박막화 공정, 본딩 공정, TSV 공정별로 문제점과 그 해결책에 대해 자세히 설명하며, 특히 $10{\mu}m$ 이하로 박막화한 로직 디바이스의 특성 변화에 대한 결과를 보고한다. 웨이퍼 박막화 공정에서는 기계적 강도 변동 요인, 금속 불순물에 대한 gettering 대책에 대해 논의되며, 본딩 공정에서는 웨이퍼의 두께 균일도를 높이기 위한 방법에 대해 설명한다. TSV형성 공정에서는 누설 전류 발생 원인과 개선 방법을 소개한다. 마지막으로 본 기술을 적용한 3차원 디바이스에 대한 roadmap에 관해 논의할 것이다.

• 반도체디스플레이기술학회지
• /
• 제2권1호
• /
• pp.25-29
• /
• 2003

The fluid flow, mass transfer, heat transfer and film thickness variation during the spin coating process are numerically studied. The model is said to be I-dimensional because radial variations in film thickness, concentration and temperature are ignored. The finite difference method is employed to solve the equations that are simplified using the similarity transformation. In early time, the film thinning is due to the radial convective outflow. However that slows during the first seconds of spinning so the film thinning due to evaporation of solvent becomes sole. The time varing film thickness is analyzed according to the wafer spin speed, the various solvent fraction in the coating liquid, and the various solvent vapor fraction in the bulk of the overlying gas during the spin coating is estimated.

• 한국기계가공학회지
• /
• 제11권1호
• /
• pp.26-32
• /
• 2012

Polishing is one of the important methods in manufacturing of Si wafers and in thinning of completed device wafers. This study will report the characteristic of wafer according to processing time, machining speed and pressure which have major influence on the abrasion of Si wafer polishing. It is possible to evaluation of wafer abrasion by load cell and infrared temperature sensor. The characteristic of wafer surface according to processing condition is selected to use a result data that measure a pressure, machining speed, and the processing time. This result is appeared by the characteristic of wafer surface in machining condition. Through that, the study cans evaluation a wafer characteristic in variable machining condition. It is important to obtain optimal condition. Thus the optimum condition selection of ultra precision Si wafer polishing using load cell and infrared temperature sensor. To evaluate each machining factor, use a data through each sensor. That evaluation of abrasion according to variety condition is selected to use a result data that measure a pressure, machining speed, and the processing time. And optimum condition is selected by this result.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 춘계학술대회 논문집
• /
• pp.921-926
• /
• 1997

SOI(Silicon On lnsulator) technology is many advantages in the gabrication of MOS(Metal-Oxide Semiconductor) and CMOS(Complementary MOS) structures. These include high speed, lower dynamic power consumption,greater packing density, increased radiation tolearence et al. In smiple form of bonded SOL wafer manufacturing, creation of a bonded SOI structure involves oxidizing at least one of the mirror polished silicon surfaces, cleaning the oxidized surface and the surface of the layer to which it will be bonded,bringing the two cleanded surfaces together in close physical proximity, allowing the subsequent room temperature bonding to proceed to completion, and than following this room temperature joining with some form of heat treatment step,and device wafer is thinned to the target thickness. This paper has been performed to investigate the possibility of the bonded SOI wafer manufacturing Especially, we focused on the bonding quality and thinning method. Finally,we achieved the bonded SOI wafer that Si layer thickness is below 3 .mu. m and average roughness is below 5.angs.

• 센서학회지
• /
• 제31권1호
• /
• pp.36-40
• /
• 2022

High-power devices, such as LEDs and radars, inevitably generate a large amount of heat, which is the main cause of shortening lifespan, deterioration in performance, and failure of electronic devices. The embedded IC process can be a solution; however, when applied to large-area substrates (larger than 8 in), there is a limit owing to the difficulty in the process after wafer thinning. In this study, an 8-in wafer-level high-power electronic package based on the embedded IC process was implemented with temporary bonding and debonding technology using double-sided thermal release tape. Good heat-dissipation characteristics were demonstrated both theoretically and experimentally. These findings will advance the commercialization of high-power electronic packaging.