• 정보와 통신
• /
• 제30권8호
• /
• pp.11-19
• /
• 2013

본고에서는 M2M/IoT 통신의 실현을 위한 무선 통신망 기술을 알아보고 IoT 통신을 위한 요구사항과 이를 해결하기 위한 연구 동향을 살펴본다. 특히, 많은 수의 IoT 디바이스가 싱크 노드를 이용하여 IP 망에 접속하는 Wireless Sensor network(WSN)에서의 문제와, LTE-A와 같은 cellular 망을 이용하여 접속하는 IoT 서비스로 나누어 논의한다. WSN관점에서는 에너지에 대한 제약이 심한 환경을 고려하여 발생할 수 문제점들을 분류하고 이에 대한 다양한 해결책을 제시하며, Cellular 망에서는 현재의 LTE-A 망에 많은 수의 IoT 디바이스가 연결될 경우 발생할 수 있는 문제점들을 논하고 기존의 통신에 영향을 최소화 하며 IoT 서비스를 공존할 수 있는 연구 동향을 논한다.

• 전기학회논문지
• /
• 제65권1호
• /
• pp.122-127
• /
• 2016

In this paper, new spectrum sensing schemes based on analog/RF front-end processing are introduced for IoT wireless sensor networks. While the conventional approaches for wireless channel cognition have been issued in signal processing area, the RF spectrum cognition concept makes it feasible to achieve cognitive wireless sensor networks (C-WSNs). The spectrum cognition at RF processing is categorized as four kinds of sensing mechanisms. Two recent reseaches are described as promising candidates for the C-WSN. One senses spectrum by the frequency discriminating receiver, the other senses and detects from the frequency selective super-regenerative receiver. The introduced systems with simple and low-power RF architectures play dual roles of channel sensing and demodulation. simultaneously. Therefore, introduced spectrum sensing receivers can be one of the best candidates for IoT wireless sensor devices in C-WSN environments.

• International Journal of Computer Science & Network Security
• /
• 제22권3호
• /
• pp.285-291
• /
• 2022

WSN is the major component for information transfer in IoT environments. Source Location Privacy (SLP) has attracted attention in WSN environments. Effective SLP can avoid adversaries to backtrack and capture source nodes. This work presents a Two-Level Randomized Sector-based Routing (TLRSR) model to ensure SLP in wireless environments. Sector creation is the initial process, where the nodes in the network are grouped into defined sectors. The first level routing process identifies sector-based route to the destination node, which is performed by Ant Colony Optimization (ACO). The second level performs route extraction, which identifies the actual nodes for transmission. The route extraction is randomized and is performed using Simulated Annealing. This process is distributed between the nodes, hence ensures even charge depletion across the network. Randomized node selection process ensures SLP and also avoids depletion of certain specific nodes, resulting in increased network lifetime. Experiments and comparisons indicate faster route detection and optimal paths by the TLRSR model.

• Journal of Information Processing Systems
• /
• 제15권4호
• /
• pp.797-819
• /
• 2019

Internet of Things (IoT) is the paradigm of network of Internet-connected things as objects that constantly sense the physical world and share the data for further processing. At the core of IoT lies the early technology of radio frequency identification (RFID), which provides accurate location tracking of real-world objects. With its small size and convenience, RFID tags can be attached to everyday items such as books, clothes, furniture and the like as well as to animals, plants, and even humans. This phenomenon is the beginning of new applications and services for the industry and consumer market. IoT is regarded as a fourth industrial revolution because of its massive coverage of services around the world from smart homes to artificial intelligence-enabled smart driving cars, Internet-enabled medical equipment, etc. It is estimated that there will be several dozens of billions of IoT devices ready and operating until 2020 around the world. Despite the growing statistics, however, IoT has security vulnerabilities that must be addressed appropriately to avoid causing damage in the future. As such, we mention some fields of study as a future topic at the end of the survey. Consequently, in this comprehensive survey of IoT, we will cover the architecture of IoT with various layered models, security characteristics, potential applications, and related supporting technologies of IoT such as 5G, MEC, cloud, WSN, etc., including the economic perspective of IoT and its future directions.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제15권4호
• /
• pp.1317-1341
• /
• 2021

Nowadays, the Internet of Things (IoT) is adopted to enable effective and smooth communication among different networks. In some specific application, the Wireless Sensor Networks (WSN) are used in IoT to gather peculiar data without the interaction of human. The WSNs are self-organizing in nature, so it mostly prefer multi-hop data forwarding. Thus to achieve better communication, a cross-layer routing strategy is preferred. In the cross-layer routing strategy, the routing processed through three layers such as transport, data link, and physical layer. Even though effective communication achieved via a cross-layer routing strategy, energy is another constraint in WSN assisted IoT. Cluster-based communication is one of the most used strategies for effectively preserving energy in WSN routing. This paper proposes a Bio-inspired cross-layer routing (BiHCLR) protocol to achieve effective and energy preserving routing in WSN assisted IoT. Initially, the deployed sensor nodes are arranged in the form of a grid as per the grid-based routing strategy. Then to enable energy preservation in BiHCLR, the fuzzy logic approach is executed to select the Cluster Head (CH) for every cell of the grid. Then a hybrid bio-inspired algorithm is used to select the routing path. The hybrid algorithm combines moth search and Salp Swarm optimization techniques. The performance of the proposed BiHCLR is evaluated based on the Quality of Service (QoS) analysis in terms of Packet loss, error bit rate, transmission delay, lifetime of network, buffer occupancy and throughput. Then these performances are validated based on comparison with conventional routing strategies like Fuzzy-rule-based Energy Efficient Clustering and Immune-Inspired Routing (FEEC-IIR), Neuro-Fuzzy- Emperor Penguin Optimization (NF-EPO), Fuzzy Reinforcement Learning-based Data Gathering (FRLDG) and Hierarchical Energy Efficient Data gathering (HEED). Ultimately the performance of the proposed BiHCLR outperforms all other conventional techniques.

• 한국컴퓨터정보학회:학술대회논문집
• /
• 한국컴퓨터정보학회 2016년도 제53차 동계학술대회논문집 24권1호
• /
• pp.65-66
• /
• 2016

최근 과학의 발달로 사물에 대한 다양한 센서와 통신 기능을 부여하여 사람 대 사람 또는 사물 대 사물 서로 교류하는 개념인 IoT(Internet of Things)가 화제이다. IoT를 구성하는 요소 중에 하나인 Wireless Sensor Networks(WSN)에 대한 연구를 한다. WSN은 전쟁터의 정찰과 같은 가혹한 환경에 적용되며 이를 구성하는 센서는 제한된 자원을 가지고 있기 때문에 고장에 취약한 특성이 있다. 따라서 상호 통신이 외부 요인에 의해 단절된 네트워크의 연결 복구에 대한 연구가 지속적으로 이루어지고 있다. 본 논문에서는 이러한 WSN 네트워크의 연결 복구 방식, 연결 복구기법 및 알고리즘의 연구 동향에 대해서 서술한다.

• International Journal of Computer Science & Network Security
• /
• 제22권7호
• /
• pp.91-102
• /
• 2022

With the evolution of wireless sensor network (WSN) technology, the routing policy has foremost importance in the Internet of Things (IoT). A systematic routing policy is one of the primary mechanics to make certain the precise and robust transmission of wireless sensor networks in an energy-efficient manner. In an IoT environment, WSN is utilized for controlling services concerning data like, data gathering, sensing and transmission. With the advantages of IoT potentialities, the traditional routing in a WSN are augmented with decision-making in an energy efficient manner to concur finer optimization. In this paper, we study how to combine IoT-based deep learning classifier with routing called, Kriging Regressive Deep Belief Neural Learning (KR-DBNL) to propose an efficient data packet routing to cope with scalability issues and therefore ensure robust data packet transmission. The KR-DBNL method includes four layers, namely input layer, two hidden layers and one output layer for performing data transmission between source and destination sensor node. Initially, the KR-DBNL method acquires the patient data from different location. Followed by which, the input layer transmits sensor nodes to first hidden layer where analysis of energy consumption, bandwidth consumption and light intensity are made using kriging regression function to perform classification. According to classified results, sensor nodes are classified into higher performance and lower performance sensor nodes. The higher performance sensor nodes are then transmitted to second hidden layer. Here high performance sensor nodes neighbouring sensor with higher signal strength and frequency are selected and sent to the output layer where the actual data packet transmission is performed. Experimental evaluation is carried out on factors such as energy consumption, packet delivery ratio, packet loss rate and end-to-end delay with respect to number of patient data packets and sensor nodes.

• 한국멀티미디어학회논문지
• /
• 제19권12호
• /
• pp.2014-2023
• /
• 2016

Web presence is one of the key issues for extensive deployment of Internet-of-Things (IoT). An obstacle to overcome for Web presence is relatively low computing power of IoT devices. In this paper, we present implementation of an IoT platform based on Constrained Application Protocol (CoAP) which is a web transfer protocol proposed by Internet Engineering Task Force (IETF) for the low performance IoT devices such as Wireless Sensor Network (WSN) nodes and micro-controllers. To qualify the performance of CoAP-based IoT system for such an application as smart grid, we designed a test platform consisting of Raspberry Pi2, Kmote WSN node and a desktop PC. Using open source softwares, CoAP was implemented on top of the platform. Leveraging the GET command defined at CoAP specification, performance of the system was measured in terms of round-trip time (RTT) from web application to the Kmote sensor node. To investigate abnormal cases among the test results, hop-by-hop delays were measured to analyze resulting data. The average response time of CoAP-based communication except the abnormal data was reduced by 23% smaller than the previous research result.

• 한국컴퓨터정보학회논문지
• /
• 제24권8호
• /
• pp.131-136
• /
• 2019

A wireless sensor network (WSN) consists of several sensor nodes and usually one base station. In this paper, we propose a method to monitor topics using a wireless sensor network. Fire threatens people, animals, and plants, and it takes a lot of recovery time when a fire occurs. For this reason, it is necessary to use a fire monitoring system that is easy to configure and fast to avoid fire. In this paper, we propose a fast and easily reliable fire detection system using WSN. The wireless node of the WSN measures the temperature and brightness around the node. The measured information is transferred to the workstation and to the base station. The workstation analyzes current and historical data records to monitor the fire and notify the manager.

• 한국ITS학회 논문지
• /
• 제18권1호
• /
• pp.74-82
• /
• 2019

4차 산업혁명을 통해 지능형 연결 사회를 기반으로 한 스마트 시티가 형성되고 있다. 스마트 시티에서 태양 에너지를 비롯한 신재생 에너지의 사용이 증가하고 있으나, 신재생 에너지의 모니터링 및 관리의 어려움으로 인한 시스템 수요가 증가하고 있다. 또한 환경 및 물리적 요인에 대한 데이터를 수집하고 모니터링하기 위한 무선 센서네트워크 기반 IoT 기술이 접목되고 있으나, 실시간 측정을 위한 안정적인 전원 공급이 필수적인 상황이다. 이에 본 논문에서는 LoRaWan을 비롯한 IoT 기술 기반의 스마트 시티에 적용할 수 있는 효율적인 태양 에너지 기반 전력 관리 기법에 대하여 제안하였으며, 이를 기반으로 태양광 패널 시스템의 오동작 방지 및 모니터링을 수행할 수 있다. 제안한 기술을 통해 태양광 패널 시스템에서 생성된 전력을 최대로 출력하여 각 그리드에 분배할 수 있으며, Simulink 기반 시스템 모델링과 실시간 에뮬레이션을 기반으로 효율성을 입증하였다.