• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.15 no.2
• /
• pp.269-275
• /
• 1997

Car Navigation System with Global Positioning System (GPS) can display position direction and the shortest cut of one's destination. The position datum for GPS in World Geodetic System 1984 (WGS-84) coordinates system need to transform Bessel coordinates system and process Map projection. Since 1987, GPS has used the WGS-84. WGS-84 is a geocentric equipotential ellipsoid of revolution which is defined four parameters. In this study, by comparing the digitized topographical map with the digital map of GPS datum we can consider the technique of WGS84 digital map.

• Publications of The Korean Astronomical Society
• /
• v.15 no.1
• /
• pp.31-34
• /
• 2000

We determined the precise three dimensional WGS84 Coordinates and the sea level height of Seoul Radio Astronomy Observatory (SRAO). In this study, we performed the simultaneous GPS observations at SRAO and Seoul GPS Reference Station(SGRS) of Korea Astronomy Observatory(KAO) for 3.5 hours from 17KST on October 27, 1999. We employed two different antennas, i.e., chokering antenna at SGRS of KAO and L1/L2 compact with groundplane antenna at SRAO. But we employed same type of receivers, i.e., Trimble 4000SSI at both observing places. The observed data were processed by GPSURVEY 2.30 software of Trimble with L1/L2 ION Free technique and broadcasting ephemeris of GPS Satellites because of very short baseline between SGRS of KAO and SRAO. We determined WGS84 latitude, longitude, height and the sea level height of SRAO with $37^{\circ}\;27'\;15.'\;6846N\pm0.'\;0004,\;126^{\circ}\;57'\;19.'\;0727E\pm0.'\;0002,\;204.89m\pm0.02m,\;181.38m\pm0.17m$, respectively.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.19 no.4
• /
• pp.415-423
• /
• 2001

This paper deals with the data processing method relative to reference frames through the calculation of absolute coordinates of permanent GPS site which was established at Sungkyunkwan University. In this paper. we computed the ITRF97 coordinates with high precision (0.0001 ppm) from GPS data analysis. Also, we derived the accurate coordinates referred to WGS84 and Korean Geodetic Datum (KGD) using transformation parameters provided. ITRF97 coordinates were computed by using the GIPSY-OASIS II (GOA II) software and the algorithms for determining the position developed Jet Propulsion Laboratory (JPL). The coordinates referred to WGS84 and KGD were derived from the transformation parameters provided by International Earth Rotation Service (IERS) and National Geography Institute (NGI). The parameters determined by NGI were calculated from the 2000 project of the establishment of geocentric coordinate system. We tested its availability through the comparison of the coordinates obtained from local GPS data analysis.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.20 no.1
• /
• pp.110-120
• /
• 2008

Gridded bathymetric data of 30 seconds apart in Korea marginal seas $(30^{\circ}N{\sim}44^{\circ}N,\;117^{\circ}E{\sim}143^{\circ}E)$ are produced. In order to make the data, both updated gridded data of 1 minute apart on internet sites and all the digital nautical charts issued by National Oceanographic Research Institute (NORI) in Oct. 2007 are used. The reference level of the gridded data is approximate level of lowest low water and the horizontal coordinates are based on the WGS84 ellipsoid. Especially a developed computer program can collect all the sounding data including depth contour directly from the digital charts and UTM coordinates of the data are converted to the WGS84 coordinates from which accuracy of data is significantly improved. An interpolation method is adopted to produce the gridded data which are compared and analyzed against the existing gridded data. In this gridded data we can see significantly detailed topographic features which could not be found in the previous data.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.20 no.3
• /
• pp.277-290
• /
• 2008

In order to apply UTM coordinates conversion in zones larger than $14^{\circ}$ wide, a new conversion formula, based on the 12th expansion of Taylor series, is derived which is shown to be an extension of Thomas' formula(1952). Some examples of coordinate conversion between WGS84 and UTM are presented and convergences of computational results are also tested according to the order of formula. The present conversion formula can be used to make rectangular coordinate grid systems for numerical models to compute long wave propagation such as tide or tsunami around Korea.

• Ocean and Polar Research
• /
• v.23 no.2
• /
• pp.121-130
• /
• 2001

Geodetic datums define the size and shape of the earth and the origin and orientation of the coordinate systems used to map the earth. A lot of different datums have been developed and each nation uses its own datum as the basis for coordinate systems used to identify positions in geographic information systems. Recently GPS receivers are widely used to find out location and GPS is based on the World Geodetic System 1984(WGS-84) datum. Therefore the diversity of datums in use today requires accurate conversion between coordinates in different datums. In this study a coordinate conversion program on Windows is developed to transform between Tokyo Bessel(1941), which is the reference datum in Korea, and WGS-84. Several examples of coordinate conversion are presented and computed results are tested and proved to be correct.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.14 no.5
• /
• pp.1209-1217
• /
• 1994

This paper proposed transformation coefficients suitable to South Korea for the establishment of coordinate transformation system between Bessel and WGS84 ellipsoids. For this, the coordinates transformation algorithms concerned with parameter methods was developed, and global test network which has 15 astronomical points in South Korea were designed. Based on signals received from GPS, computed the geoid undulation by GPS/Leveling, and derived parameters(3-, 4-, 6-, and 7-parameter) for transformation between each ellipsoid, applied global networks to study the characteristics of transformation according to parameters. Through the successful application of 7-parameters derived in this study and 7-parameters proposed by DMA for map projection, transformation coefficients suitable to South Korea was proposed.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.16 no.2
• /
• pp.149-158
• /
• 1998

The aim of this paper is to propose the technique of the two dimensional geodetic coordinates conversion between WGS84 and Bessel spheroids by the two-dimensional affine transformation modeling based on the UTM plane coordinates without the local geoid model which is essential to three dimensional coordinates conversion. Area of approximately $25\times{11}$ square km in the city of Inchon was selected as the test area. The transformation parameters were determined using the eleven triangulation control points in test area. And then, those paraneters were applied to the fifteen cadastral control points which selected as checking points for precision checking of transformation parameters. The average and standard deviations of the absolute values of the conversion residuals of checking points in latitude/longitude and N/E(UTM) and/or x/y(TM) are $\pm0.006"$$\pm0.013"$ and $\pm{17cm/}\pm{30cm}$ respectively. Also, coefficients for 7-parameters, 3-parameters and UTM model transformation computed according as sizes of transformed area, and then the transformed characteristics of checking points according to transformation methods analyzed synthetically.hetically.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.11 no.2
• /
• pp.27-34
• /
• 1993

The construction of the accurate, economic topographic information for a sorts of work and a base facilities of country is one of the very important subjects. In this paper, Global network which include south KOREA and Regional network which include Chung-Nam/Chung-Buk provinces were designed, obtained WGS84 coordinates of control points in networks by GPS. The coefficients of transformation between WGS84 coordinates and Bessel coordinates in consideration of geoid undulations was derived by 7-parameter method. Also, the efficiency of 7-parameter method was proved through successful application of T.M. and U.T.M projection for the precise mapping, and the effectiveness of the aquisition of three dimensional topographic information by GPS was suggested.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.12 no.1
• /
• pp.69-76
• /
• 1994

In this paper, the characteristics of coordinate transformation between the WGS84 and the Bessel ellipsoids according to the assumed values of the geoidal height on Bessel ellipsoid at the geodetic datum origin of Korea were investigated. For this, based on GPS data of 11 control points in Chungnam and Chungbuk province, the mean shift values between ellipsoids were calculated in each case. The geoidal heights on the Bessel ellipsoid were modelled in the area and the coordinate transformation coefficients were derived, and then the accuracy of the transformed coordinates according to fluctuations in geoidal heights were studied.