• 제목/요약/키워드: WAsP Engineering

검색결과 12,971건 처리시간 0.04초

휴대형 혈액가스분석 시스템의 구현 및 성능평가 (Implementation on the Portable Blood Gas Analyzer and Performance Estimation)

  • 정도운;전계록;배진우;김길중;심윤보
    • 센서학회지
    • /
    • 제12권1호
    • /
    • pp.34-43
    • /
    • 2003
  • 본 연구에서는 동맥혈액 내의 혈액가스(pH, $pCO_2$, $pO_2$)를 측정할 수 있는 휴대용 혈액가스 분석 시스템을 구현하였다. 구현된 시스템은 크게 하드웨어부와 소프트웨어부로 구분하였으며, 하드웨어부는 메커니즘과 전자회로부로 구분하여 설계하였다. 소프트웨어부는 각 모듈별로 작성하였으며, 운용프로그램, 세척프로그램, 교정프로그램, 측정프로그램 등으로 구성하였다. 그리고 시스템의 정확한 교정을 위하여 2점 교정방식을 사용하였고, 1점 보정방식을 추가 적용하여 측정의 정확성을 높이고자 하였다. 시스템의 평가를 위하여 각 전극의 감응특성을 조사하였다. 그리고 정확도 평가를 위하여 표준용액을 이용하여 측정실험을 하고 통계적인 분석을 하였다. 그 결과 계수변화율이 1.12이내이었고, 최대오차가 1.298%이내인 정확도를 나타내었으며, 휴대형 ABGA의 개발 가능성을 확인하였다.

BCl3 기반의 혼합가스들을 이용한 InP 고밀도 유도결합 플라즈마 식각 (High Density Inductively Coupled Plasma Etching of InP in BCl3-Based Chemistries)

  • 조관식;임완태;백인규;이제원;전민현
    • 한국재료학회지
    • /
    • 제13권12호
    • /
    • pp.775-778
    • /
    • 2003
  • We studied InP etching in high density planar inductively coupled $BCl_3$and $BCl_3$/Ar plasmas(PICP). The investigated process parameters were PICP source power, RIE chuck power, chamber pressure and $BCl_3$/Ar gas composition. It was found that increase of PICP source power and RIE chuck power increased etch rate of InP, while that of chamber pressure decreased etch rate. Etched InP surface was clean and smooth (RMS roughness <2 nm) with a moderate etch rate (300-500 $\AA$/min) after the planar $BCl_3$/Ar ICP etching. It may make it possible to open a new regime of InP etching with $CH_4$$H_2$-free plasma chemistry. Some amount of Ar addition (<50%) also improved etch rates of InP, while too much Ar addition reduced etch rates of InP.

응집제주입에 의한 급속모래여과에서 초기유출수의 수질향상 (Improving the Initial Effluent Water Quality of Rapid Sand Filter by Coagulants Injection)

  • 김우항;전지훈
    • 한국환경과학회지
    • /
    • 제15권3호
    • /
    • pp.237-242
    • /
    • 2006
  • The purpose of this research was to investigate the efficiency of coagulants dose after backwashing. The turbidity of initial effluent was high after backwashing in the rapid sand filtration and the high turbidity was almost removed by coagulants dose into filter-sand after backwashing. It was found that the turbidity of initial effluent was well removed by all kinds of the coagulants used in this study. When filtration was performed input water with differentiated pH's, the turbidity of effluent was low at the range of pH 5 - pH 7. But the removal was not good about over pH 9. This result was considered into the existence forms of aluminium, $Al(OH)^{2+}\;and\;{Al(OH)_2}^+$ at pH 5. Cryptosporidiums of effluent were 4/ml for ten minutes immediately after back washing and 3/ml until sixty minutes. However, the case of coagulant dose after backwashing, Cryptosporidiums of effluent were 0.5/ml for ten minutes with no detection after twenty minutes.

혐기성 회분반응기에서 수소생산 시 최적 pH 산정에 관한 연구 (A Study for the Optimum pH of Hydrogen Production in Anaerobic Batch Reactor)

  • 전윤선;박종일;유승호;이태진
    • 대한환경공학회지
    • /
    • 제29권1호
    • /
    • pp.54-61
    • /
    • 2007
  • pH가 혐기성 수소 발효에 미치는 영향을 고찰하기 위해 배양기간 동안 pH를 $3\sim10$까지 일정하게 유지시킨 상태에서 수소생산 효율을 살펴보았다. 유입기질을 sucrose로 하여 생성된 가스는 이산화탄소와 수소였으며 메탄가스는 검출되지 않았다. 수정 Gompartz 방정식을 이용하여 수소가스 발생량$(P_h)$과 최대수소 생성율$(R_h)$을 회귀분석하였을 때 pH 5에서 수소가스 발생량$(P_h)$은 약 1182 mL이고 최대수소 생성율$(R_h)$은 112.46 mL/g dry wt biomass/hr이였다. 수소 전환율은 22.56%이였으며 butyrate/acetate 비가 pH 5에서는 1.63, pH 6에서는 0.38로 ratio값이 높은 pH 5에서 효율이 더 좋다는 것을 확인할 수 있었다. Haldane equation을 이용하여 비수소생산율을 산정해 본 결과 최대 비수소생산율은 119.61 mL/g VSS/hr이였고, 최대 비수소생산율을 나타내는 pH는 5.5로 판명되었다.

Purification and Characterization of a Cytochrome P-450 from Pravastatin-Producing Streptomyces sp. Y-110.

  • Park, Joo-Woong;Lee, Joo-Kyung;Kwon, Tae-Jong;Yi, Dong-Hee;Park, Yong-Il;Kang, Sang-Mo
    • Journal of Microbiology and Biotechnology
    • /
    • 제11권6호
    • /
    • pp.1011-1017
    • /
    • 2001
  • Streptomyces sp. Y-110 cytochrome P-450, induced by the addition of compactin -Na into the culture medium, was purified from the cell extract to apparent homogeniety, mainly by DEAE-Sepharose, hydroxyapatite, and Mono Q column chromatyography. The sepcific activity of purified enzyme on its substrate, compactin-Na, was determined to be 15 nmol of pravastatin per mg protein. The molecular mass of this enzyme on SDS-PAGE was $37{\pm}0.5$ kDa, pI was 4.5, and its CO difference spectrum showed maximum absorption peaks at 452 and 550nm, respectively. The N-terminal amino acid sequence was determined to be Met>Thr>Cys>Thr>Pro>Val>Thr>Val>The>Gly>Ala>Ala>Gly>Gln>Ile>Gly>Tyr>Ala>Leu. Its apparent $K_m$ on compactin-Na was $1.294{\mu}M{\cdot}min^-1,\;and\;V_{max}\;was\;1.028{\mu}M{\cdot}min^-1$. The maximum substrate concentration ($K_s$) for reaction was $270 {\mu}M$and thus $1/[K_s]$ was $3.7{\mu}M$. These physicochemical characteristics and kinetic behavior of this enzyme were compared and shown to be different from those of Streptomyces cytochrome P-450 enzymes reported, suggesting that this enzyme may be an additional member of the Streptomyces cytochrome P-450 family.

  • PDF

Adipic Acid와 Diethylene Glycol의 Polyesterification에 대한 유기나노점토와 촉매의 영향 (Effect of Organo Nanoclay and Catalyst on the Polyesterification between Adipic Acid and Diethylene Glycol)

  • 박경규;신승욱;오민지;이상호
    • Elastomers and Composites
    • /
    • 제46권1호
    • /
    • pp.37-44
    • /
    • 2011
  • Adipic acid(AA)와 diethylene glycol(DEG) 사이에서 일어나는 반응의 속도에 대한 유기나노점토(Cloisite 30B)의 영향을 규명하기 위하여 383K와 423 K에서 Br${\phi}$nsted acid인 p-toluene sulfonic acid(p-TSA)와 Lewis acid인 butylchlorotin dihydroxide를 촉매로 사용하여 에스테르 반응을 수행하였다. 촉매의 양은 전체반응물의 0.14 mol%만큼 사용하였다. 반응 생성물의 산가로부터 계산된 전환율 vs. 시간의 자료를 사용하여 반응속도를 해석하였다. [OH]/[COOH] 초기 몰비가 2인 상태에서 수행되는 polyester-diol 합성반응의 속도는 p-TSA 촉매하에서는 AA에 대하여 2차 반응으로, butylchlorotin dihydroxide 촉매하에서는 AA에 대하여 1차 반응으로 잘 해석되었으며 두 반응의 활성화 에너지는 각각 42.2 kJ/mol, 63.8 kJ/mol이었다. AA와 DEG에 Cloisite 30B를 5 wt% 첨가시키면 p-TSA 촉매는 활성이 크게 줄어 반응속도가 매우 느려졌으며, 이 때 활성화 에너지는 72.9 kJ/mol로 높게 계산되었다. Butylchlorotin dihydroxide 촉매는 Cloisite 30B의 첨가에 관계없이 거의 일정한 활성을 유지하였다. Butylchlorotin dihydroxide 촉매하에서 Cloisite 30B를 첨가한 반응의 활성화 에너지는 61.8 kJ/mol로 Cloisite 30B를 첨가하지 않은 반응의 활성화 에너지보다 약간 낮았다.

Aerobic Degradation of Tetrachloroethylene(PCE) by Pseudomonas stutzeri OX1

  • Ryoo, Doohyun;Shim, Hojae;Barbieri, Paola;Wood, Thomas K.
    • 한국지하수토양환경학회:학술대회논문집
    • /
    • 한국지하수토양환경학회 2000년도 추계학술대회
    • /
    • pp.207-208
    • /
    • 2000
  • Since trichloroethylene (TCE), dichloroethylene (DCE), and vinyl chloride (VC) arise from anaerobic degradation of tetrachloroethylene (PCE) and TCE, there is interest in creating aerobic remediation systems that avoid the highly toxic VC and cis-DCE which predonominate in anaerobic degradation. However, it seemed TCE could not be degraded aerobically without an inducing compound (which also competitively inhibits TCE degradation). It has been shown that TCE induces expression of both the toluene dioxygenase of p. putida F1 as well as toluene-p-monooxygenase of P.mendocina KRI. We investigated here the ability of PCE, TCE, and chlorinated phenols to induce toluene-o-xylene monooxygenase (ToMO) from P.stutzeri OX1. ToMO has a relaxed regio-specificity since it hydroxylates toluene in the ortho, meta, and para positions; it also has a broad substrate range as it oxidizes o-xylene, m-xylene, p-xylene, toluene, benzene, ethylbenzene, styrene, and naphthalene; chlorinated compounds including TCE, 1, 1-DCE, cis-DCE, trans-DCE, VC, and chloroform : as well as mixtures of chlorinated aliphatics (Pseudomonas 1999 Maui Meeting). ToMO is a multicomponent enzyme with greatest similarity to the aromatic monooxygenases of Burkholderia pickettii PKO1 and P.mendocina KR1. Using P.sturzeri OX1, it was found that PCE induces P.mendocina KR1 Using P.situtzeri OX1, it was found that PCE induces ToMO activity measured as naphthalene oxygenase activity 2.5-fold, TCE induces 2.3-fold, and toluene induces 3.0 fold. With the mutant P.stutzeri M1 which does not express ToMO, it was also found there was no naphthalene oxygenate activity induced by PCE and TCE; hence, PCE and TCE induce the tow path. Using P.putida PaW340(pPP4062, pFP3028) which has the tow promoter fused to the reporter catechol-2, 3-dioxygenase and the regulator gene touR, it was determined that the tow promoter was induced 5.7-, 7.1-, and 5.2-fold for 2-, 3-, 4-chlorophenol, respectively (cf. 8.9-fold induction with o-cresol) : however, TCE and PCE did not directly induce the tou path. Gas chromatography and chloride ion analysis also showed that TCE induced ToMO expression in P.stutzeri OX1 and was degraded and mineralized. This is the first report of significant PCE induction of any enzyme as well as the first report of chlorinated compound induction of the tou operon. The results indicate TCE and chlorinated phenols can be degraded by P.stutzeri OX1 without a separate inducer of the tou pathway and without competitive inhibition.

  • PDF

Comparison of Lower Extremity Kinematics and Kinetics during Downhill and Valley-shape Combined Slope Walking

  • Jeong, Jiyoung;Shin, Choongsoo S.
    • 한국운동역학회지
    • /
    • 제26권2호
    • /
    • pp.161-166
    • /
    • 2016
  • Objective: The purpose of this study was to determine the knee and ankle joint kinematics and kinetics by comparing downhill walking with valley-shape combined slope walking. Method: Eighteen healthy men participated in this study. A three-dimensional motion capture system equipped with eight infrared cameras and a synchronized force plate, which was embedded in the sloped walkway, was used. Obtained kinematic and kinetic parameters were compared using paired two-tailed Student's t-tests at a significance level of 0.05. Results: The knee flexion angle after the mid-stance phase, the mean peak knee flexion angle in the early swing phase, and the ankle mean peak dorsiflexion angle were greater during downhill walking compared with valley-shape combined slope walking (p < 0.001). Both the mean peak vertical ground reaction force (GRF) in the early stance phase and late stance phase during downhill walking were smaller than those values during valley-shape combined slope walking. (p = 0.007 and p < 0.001, respectively). The mean peak anterior GRF, appearing right after toe-off during downhill walking, was also smaller than that of valley-shape combined slope walking (p = 0.002). The mean peak knee extension moment and ankle plantar flexion moment in late stance phase during downhill walking were significantly smaller than those of valley-shape combined slope walking (p = 0.002 and p = 0.015, respectively). Conclusion: These results suggest that gait strategy was modified during valley-shape combined slope walking when compared with continuous downhill walking in order to gain the propulsion for lifting the body up the incline for foot clearance.

Pseudomonas sp. YD-15가 생산하는 CMCase의 특성 (Properties of the CMCase produced by Pseudomonas sp. YD-15)

  • 이정우;김창남;허남윤;오두환
    • Applied Biological Chemistry
    • /
    • 제35권3호
    • /
    • pp.173-178
    • /
    • 1992
  • 토양으로부터 분리된 섬유소분해 활성이 우수한 균주를 동정하고, 효소의 생산조건, 효소의 분리 및 정제와 정제한 효소의 물리화학적 특성을 검토하였다. 분리된 미생물은 동정을 통하여 Pseudomonas sp. YD-15라고 명명하였고 avicel 1.2%, yeast extract 0.6%, $KNO_3$ 0.1%, $K_2HPO_4$ 0.2%, $MgSO_4$ $7H_2O$ 0.15%의 배지(pH 8.0)를 사용하여 $30^{\circ}C$에서 $60{\sim}80$시간 배양 하였을 때 최대 효소생산을 보였으며, 배양액으로부터 85% ammonium sulfate 침전, DEAE-Sepharose CL-6B chromatography, Sephadex G-100 gel filtration 과정을 통하여 14%의 수율로 정제도 15.3배의 효소단백질을 얻었다. 정제효소의 최적 작용 pH는 6.0 이었고 pH $5.0{\sim}8.0$ 사이에서 안정하였다. 최적 작용온도는$50^{\circ}C$였으며, $50^{\circ}C$까지는 안정하였다. 효소의 분자량은 약 100,000으로 추정되었으며, 기질인 carboxymethylcellulose(CMC)에 대한 Km 값은 40mg/ml 이었다.

  • PDF

n-헥산/p-TSA 수용액계에서 교반에 의한 유기상의 분산 (Dispersion of Organic Phase by Agitation in a n-Hexane/p-TSA Aqueous Solution System)

  • 김태옥;전종한
    • 공업화학
    • /
    • 제2권3호
    • /
    • pp.209-215
    • /
    • 1991
  • n-헥산과 40 wt % p-TSA 수용액으로 이루어진 비혼화성 액상계에서 교반에 의한 유기상의 분산을 해석하였다. 사용된 교반기는 blade의 형태가 flat와 금망으로 된 4가지 형태의 6-bladed turbine 교반기를 사용하였다. 실험결과, 동일한 교반속도에서 유기상의 분산정도는 blade의 형태가 flat, 60 mesh, 40 mesh, 20 mesh의 순서로 감소하였고 계면활성제인 TBA의 농도가 증가할수록, 그리고 유기상의 부피비가 작을수록 유기상은 잘 분산되었다. 또한 완전분산에 필요한 최소교반속도는 flat, 60 mesh, 40 mesh, 20 mesh의 순서로 증가하였으나 최소소요동력은 거의 동일하였다. 이때 Power number와 Reynolds number와의 관계는 $N_p=a\;N_{Re}{^b}$ 이었으며 교반기의 형태에 따른 상수 a와 혼합계의 종류에 따른 상수 b의 값은 각각 2200~4100, -0.69~-0.63 범위이었다.

  • PDF