• Journal of Aquaculture
• /
• v.13 no.2
• /
• pp.129-135
• /
• 2000

Genetic variabilities of local populations of Anthocidaris crassispina and Hemicentrotus pulcherrimus were analysed by random amplified polymorphic DNA (RAPD) technique with phenotypic variabilities in timing of gonadal maturation, reproductive output and size of individuals in Cheju. H, pulcherrimus, collected from 4 locations during March 1997, indicated that Daepo individuals were significantly smaller than that at Hamdok, Wimi site A and Wimi site B (ANOVA, p>0.001). Gonodal-somatic index (GSI) of the Wimi site B population was significantly higher than that of three other locations (ANOVA, P>0.0001). An ANOVA test conducted on test size of A. crassispina, harvested from six different locations of Cheju during June 1997, indicated that the size of individuals from Pophwan was significantly smaller (P>0.0001) than that from five other locations. GSIs of urchin m Wimi and Hanlim were significantly higher than that from Pohwan and Oedo (ANOVA, p>0.0001). Genetic similarity, calculated from k13 primer analysis of total DNA, among the six different populations of A. crassispina varied from 0.67 to 0.92, and the values for H. pulcherrimus from 0.60 to 0.73; thus there was no genetic variation among different populations of the same species. Therefore, the populations are genetically homologous and the observed phenotypic variabilities were possibly associated with water temperature and food.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.27 no.2
• /
• pp.197-207
• /
• 2011

The study aimed at examining how different reline resins affect flexural strength and flexural modulus of denture base. A total of 80 specimens ($64{\times}10{\times}3.3$ mm, according to ISO 1567:1999) of heat-polymerized resin, 40 specimens for (Lucitone199(Dentsply Int., NewYork, USA), SR Ivocap(Ivoclar AG, Schaan, Liechtenstein)) respectively, were polymerized according to the manufacturer's instructions and divided into eight groups(n = 10). Control group specimens remained intact. Specimens in the other groups were abraded on both sides to 2 mm thickness, and were relined in 1.3 mm thickness with 3 types of resins (Lucitone199(Dentsply), SR Ivocap(Ivoclar), and Rebase II(Tokuyama Co., Ltd, Tokyo, Japan)). All specimens were preserved in distilled water at $37^{\circ}C$ for 50 hours, and then were subjected to flexural strength testing in a universal testing machine using 3-point loading. A crosshead speed of 5 mm/min was used, and the distance between the supports was 50 mm. Data analyses included one-way analysis of variance(ANOVA) and the Tukey Honestly Significant Difference test (p=.05). Both heat-polymerized resin groups and auto-polymerized resin groups showed statistically low flexural strength and flexural modulus than control groups. Specimens relined with Lucitone 199 showed significantly higher flexural strength and flexural modulus than those relined with SR-Ivocap. Specimens relined with auto-polymerized resin showed significantly lower flexural strength and flexural modulus than those relined with heat-polymerized resin. Relining with heat-polymerized resins showed superior mechanical properties to relining with an auto-polymerized resin. Relining with the same heat-polymerized resin as the denture base does not affect mechanical properties of a denture. Lucitone199 using a compression-mould technique resulted in the highest flexural strength.

• The Korean Journal of Mycology
• /
• v.34 no.1
• /
• pp.7-14
• /
• 2006

Entomopathogenic fungus Cordyceps militaris is famous for its medicinal efficacies. It has been reported to have various pharmacological activities such as anti-tumour, insecticidal, antibacterial, immunomodulatory and antioxidant. In this study, we investigated the effect of the extract of C. militaris (MPUN8501), which was identified by the analysis of the nucleotide sequences of 5.8S ribosomal RNA, on the function of liver. C. militaris powder was extracted using hot water extracts method as time, volume and temperature and using method as differential polarity of organic solvent. Each fraction was tested for the improvement of hepatic enzyme alcohol dehydrogenase (ADH) and acetaldehyde dehydrogenase (ALDH) activity. The BuOH extracts (CME) had highest activity which was used for the test of toxicity and efficacy of C. militaris. The enhancing effect of CME on the activity of ADH and ALDH was much more than medicine, drink, natural tea etc. Thus CME promoted the resolution of alcohol and acetaldehyde in rats, inducing recovery to normal condition rapidly. Furthermore, oral administration of CME effectively protected the carbon tetrachloride-induced acute hepatic injury as revealed by the hematological parameters (levels of sGOT and sGPT) and histological observation. CME was ascertained to be safe by regulatory toxicity studies of single dose toxicity and genotoxicity. These results suggest that CME would be useful for the maintaining normal hepatic activity as a functional health food.

• Korean Journal of Plant Resources
• /
• v.27 no.1
• /
• pp.60-71
• /
• 2014

This study was conducted to identify the potential of rape stalk as a raw material for biorefinery process of rape flower. At first, rape stalk (RS) was immersed in distilled water (DW), acetic acid (AA), oxalic acid (OA), sulfuric acid (SA) and sodium hydroxide (SH) solutions, and the content of reducing sugars liberated from immersed RS was analyzed. Glucose, xylose, arabinose and sucrose were detected varying with the immersion type. In particular, 1% AA-immersion of RS for 72 hr was the most effective conditions to liberate glucose from RS. Secondly, the RS residues were used for elementary analysis and fabrication of fuel pellets. In addition to the solution type, concentration of immersion solutions (0%, 1%, 2%) and immersion time (24, 72, 120 hr) were used as experimental factors. The contents of nitrogen, sulfur and chlorine reduced effectively through the immersion of RS in DW, AA and OA solutions. For properties of RS-based pellets, bulk density and higher heating value of RS-based pellets greatly increased with the immersion of RS, and the qualities were much higher than those of the A-grade pellet of the EN standards. Ash content decreased remarkably through the immersion of RS, and was satisfied with the A-grade pellet standard. Durability was negatively affected by the immersion of RS, and did not reached to B-grade of the EN standard. In conclusion, acid immersion of RS can be a pretreatment method for the production of fuel pellet and bioethanol, but use of the immersed RS for the production of high-quality pellets might be restricted due to low durability of immersed-RS pellets. Therefore, further studies, such as investigation of detailed immersion conditions, fabrication of mixed pellets with wooden materials and addition of binders, are needed to resolve the problems.

• Korean Journal of Food Science and Technology
• /
• v.37 no.2
• /
• pp.183-188
• /
• 2005

Effects of co-solvent polarity, citric acid, pressure, temperature, run time, and co-solvent ratio on extraction of major flavonoids from Lonicera Flos were investigated using supercritical fluid $CO_{2}(SF-CO_{2})$. HPLC analysis revealed addition of pure methanol resulted in low extraction yield of major flavonoids, luteoloin (Lu), Quercetin (Qu), Apigenin (Ap). Under same condition, as co-solvent polarity increased, yields of major flavonoids increased gradually, At optimum co-solvent extraction condirion of 60% aqueous methanol (10%, v/v), yields of Lu, Qu, and Ap were 42.09, 28.18, and 3.49 mg/100 g, respectively. Addition of citric acid to 60% aqueous methanol gave higher, with addition of 1% citrie acid resulting in highest yields of 63.2 (Lu), 39.35 (Qu), and 5.79 (Ap) mg/100 g. Optimum extraction conditions of major flavonoids were 200 bar, $50^{\circ}C$, 60 min, and $CO_{2}$-methanol-water(20: 1.8: 1.2).

• The Korean Journal of Ecology
• /
• v.26 no.1
• /
• pp.5-12
• /
• 2003

Seed germination rate and seedling growth were measured on 6 different species(Phytolacca americana, Eupatorium rugosum, Rumex acetocella, Echinochloa crusgalli, Cassia mimosoides var. nomame, Setaria viridis) treated with leaf extract of E. rugosum. Total phenolic compound and heavy metal were analyzed on leaf and soil with and without E. rugosum. The growth of P. americana seedlings were stimulated by 10% and 25% of E. rugosum water extract treatment. The content of total phenolic compounds in soil was lower than that of leaf extract, and 25% was confirmed as threshold concentration in natural systems because the total phenolic compounds were not significantly different between the control soils and the soil treated with 10%, and 25% extract. Total phenolic compound concentrations of the leaf extracts were highest (1.66 mg/l) with E. rugosum grown under the Quercus forest canopy and lowest (1.09 mg/l) for the plant grown in the mixed forest edge. Leaf extracts of plants selected in different sampling sites (Forest interior, Forest edge, under Pinus Canopy and Quercus Canopy) were significant, while soil extracts were not. Seed germination of R. acetocella and S. viridis were significantly inhibited at over 50% concentrations of E. rugosum, but C. mimosoides var. nomame was not affected at any concentration. The radicle and shoot growth of the native species group were reduced two times more than those of the exotic species group by the treatment of extracts. Especially, the seed germination percentage and dry weight of E. rugosum were greater than those of the control group by treatments with extracts of 10% and 25%. Analysis of aqueous extracts from E. rugosum by HPLC identified 6 phenolic compounds: caffeic acid (460.9 mg/l), benzoic acid (109.7 mg/l), protocatechuic acid (7.3 mg/l), ρ-hydroquinone (6.0 mg/l), cinnamic acid (2.7 mg/l) and hydroquinone (0.23 mg/l). The seed germination of P. americana was also inhibited dramatically by protocatechuic acid and cinnamic acid even though the content of caffeic acid (460.9 mg/l) was the highest among analyzed phenolic compounds. The heavy metal content of soil without A. altissima was higher than that of soil with E. rugosum. Particularly, Al, Fe and Mn was considerably high and most of the heavy metal were accumulated in leaves where a high level of total phenolic compounds was found.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.48 no.4
• /
• pp.29-40
• /
• 2020

This study quantitatively and qualitatively analyzes the physical environment for health promotion in urban parks by indicators that were selected in consideration of overseas cases and previous studies. To evenly distribute the areas to be evaluated by region, Seodaemun Independence Park, Hongneung Park, Gocheok Park, Sillim Park, Cheongdam Park, Gaepo Park, and Sungin Park were selected among the old neighborhood parks already established in Seoul. The evaluation indicators consist of quantitative indicators (12 factors classified into the three categories of the surrounding environment, the park characteristics, and the park facilities) and qualitative indicators (14 factors classified according to the five categories of accessibility, safety, convenience, activities, and amenities). These indicators were selected after conducting advisory meetings with experts in the field. The physical environment perception factors were evaluated by experts and investigators by field inspections and were rated on a three-point scale (high, medium, low). According to the results of the analysis, first, not only were exercise facilities and trails, but also various factors which support health activities, such as rest areas, leisure spots, and cultural facilities, as well as accessibility, cleanliness, and drinking water facilities are important indicators for health promotion. Second, even if the requirements are met for quantitative factors, several inconveniences hinder the actual implementation or use in the qualitative evaluation. Thus, both quantitative and qualitative evaluations must be simultaneously performed for the proper judging of the physical environment of a park. Third, upon conducting a qualitative evaluation of the physical environmental factors, score differences depended on the evaluated categories in each park. These differences show that indirect indicators, such as accessibility, safety, and facility convenience are insufficiently equipped compared to direct indicators, such as activity, which includes exercise facilities and fitness centers for health promotion. As the utilization rate of parks is increasing due to COVID-19, more efforts should be made to improve park services in the post-corona era. To promote such services, it is necessary to regularly evaluate parks based on both quantitative and qualitative indicators and to contemplate services not only through direct factors but also indirect factors and security measures.

• Restorative Dentistry and Endodontics
• /
• v.32 no.3
• /
• pp.208-221
• /
• 2007

The fracture toughness test is believed as a clinically relevant method for assessing the fracture resistance of the dentinal restoratives. The objectives of this study were to measure the fracture toughness $(K_{1C})$ and microtensile bond strength of dentin-resin composite interface and compare their relationship for their use in evaluation of the integrity of the dentin-resin bond. A minimum of six short-rod specimens for fracture toughness test and fifteen specimens for microtensile bond strength test was fabricated for each group of materials used. After all specimens storing for 24 hours in distilled water at $37^{\circ}C$, they were tensile-loaded with an EZ tester universal testing machin. Statistical analysis was performed using ANOVA and Tukey's test at the 95% confidence level, Pearson's coefficient was used to verify the correlation between the mean of fracture toughness and microtensile bond strength. FE-SEM was employed on fractured surface to describe the crack propagation. Fracture toughness value of Clearfil SE Bond (SE) was the highest, followed by Adper Single Bond 2 (SB), OptiBond Solo (OB), ONE-STEP PLUS (0S), ScotchBond Multi-purpose (SM) and there was significant difference between SE and other 4 groups (p < 0.05). There were, however, no significant difference among SB, OB, OS, SM (p > 0.05). Microtensile bond strength of SE was the highest, followed by SB, OB, SM, OS and OS only showed significant lower value (p < 0.05). There was no correlation between fracture toughness and microtensile bond strength values. FE-SEM examination revealed that dentin bonding agent showed different film thickness and different failure pattern according to the film thickness. From the limited results of this study, it was noted that there was statistically no correlation between K1C and ${\mu}TBS$. We can conclude that for obtaining the reliability of bond strength test of dentin bonding agent, we must pay more attention to the test procedure and its profound scrutiny.

• Restorative Dentistry and Endodontics
• /
• v.32 no.3
• /
• pp.180-190
• /
• 2007

The purpose of this study was to evaluate the abrasion resistance of surface penetrating sealant which was applied on a composite resin restoration and to provide proper time to reapply sealant on composite resin surface. Two hundred rectangular specimens, sized $8\times3\times2mm$, were made of Micronew (Bisco, Inc., Schaumburg, IL, U.S.A) and divided into two groups; F group (n = 10) was finished with coarse and medium grit of Sof-Lex discs and BisCoverwas applied B group (n = 190) after finishing with discs. B group was again subdivided into nineteen subgroups From B-1 group to B-18 group were subjected to toothbrush abrasion test using a distilled water-dentifrice slurry and toothbrush heads B-IM group was not subjected to toothbrush abrasion test. Average surface roughness (Ra) of each group was calculated using a surface roughness tester (Surfcorder MSE-1700: Kosaka Laboratory Ltd., Tokyo, Japan) . A representative specimen of each group was examined by FE-SEM (S-4700: Hitachi High Technologies Co., Tokyo, Japan). The data were analysed using cluster analysis, paired t-test, and repeated measure ANOVA. The results of this study were as follows; 1. Ra off group was $0.898{\pm}0.145{\mu}m$ and B-IM group was $0.289{\pm}0.142{\mu}m$. Ra became higher from B-1 group $(0.299{\pm}0.48{\mu}m$ to B-18 group $(0.642{\pm}0.313{\mu}m$. 2. Final cluster center of Ra was $0.361{\mu}m$ in cluster 1 $(B-IM\simB-7)$, $0.511{\mu}m$ in cluster 2 $(B-8\simB-14)$ and $0.624{\mu}m$ in cluster 3 ($(B-15\simB-18)$. There were significant difference among Ra of three clusters. 3 Ra of B-IM group was decreased 210.72% than Ra of F group. Ra of B-8 group and B-15 group was increased 35.49% and 51.35% respectively than Ra of B-IM group. 4. On FE-SEM, B-IM group showed the smoothest resin surface. B-8 group and B-15 group showed vertically shallow scratches , and wide and irregular vertical scratches on composite resin surface respectively. Within a limitation of this study, finished resin surface will be again smooth and glazy if BisCover would be reapplied within 8 to 14 months after applying to resin surface.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.36 no.2
• /
• pp.21-29
• /
• 2018

This study was wanted to select a value evaluation item to maintain the authenticity of the Planting Landscape in Hahoe and Yangdong villages. Above all, after checking the suitability of the 43 selected items by the Focus Group Interview, the weight was calculated in the Analytic Hierarchy Process expert questionnaire to establish the importance of the indicators for the development of the assessment items. The expert analysis analyzed the importance of 2 sections, 6 divisions and 11 detailed categories, and summarized the results of the study as follows : First, the comparative importance of each category and selection of the assessment items for the stabilization of the Planting Landscape of Hahoe and Yangdong indicated that cultural values are more important than biological values. In particular, details of the biological values of trees were derived with relatively low estimates, except for the specific characteristics of species and items of type of tree. Second, as a result of verification of the suitability of the 43 items selected by the Focus Group Interview, the source diameter, the collection width, reception, flushing, supersonality, records, memorials, 11 items were selected, Third, the results of the importance evaluation of the value properties for maintaining the resistance of vegetation through the Analytic Hierarchy Process were : specific in biological values (0.187), steady (0.094), and water pipe width (2007). There was relatively little difference in the highest weights, the width of the pipe except for the lowest value received, and the source diameter flushing. Fourth, the results of an evaluation of the importance of a value property aimed at historical values were whether or not the cultural asset was designated (0.134), the record value (0.092), the time (0.088), and the monument (0.063). In terms of the importance of evaluating the historical values of Planting sites consisting of Hahoe and Yangdong, the importance of designation of cultural properties was considered to be relative to the maintenance of the Planting Landscape including culture and history. Based on the assessment items and weighted values of the Planting Landscape of Yangdong Village and the World Cultural Heritage below and below, this study's Analytic Hierarchy Process can be applied to actual criteria for the assessment of the authenticity of trees in the village. Based on the assessment items and weighted values of the Planting Landscape in Hahoe and Yangdong villages, a follow-up study on the assessment standards for the authenticity of trees in the village will be left as a future task.