• 한국분말재료학회지
• /
• 제7권3호
• /
• pp.131-136
• /
• 2000

The effect of tempering temperature on the three point bending fatigue behavior of a P/M high speed steel JYPS-23 (1.28% C, 4.20% Cr, 6.40% W, 5.00% Mo, 3.10% V, bal. Fe) was investigated. The number of cycles to failure of the specimen austenitized at $1175^{\circ}C$ drastically increased with increasing tempering temperature. As tempering temperature increased from 500 to $620^{\circ}C$, the volume fraction and average size of carbides (MC or M6C) did not significantly changed, while hardness decreased drastically. The reduced hardness is due to the softening of matrix, which increased the resistance of the fatigue crack propagation. For a practical application, powder compacting test were also conducted with the P/M high speed steel punches tempered at 500, 580, and $620^{\circ}C$. The number of compacting cycles to failure of the punches also increased with increasing tempering temperature.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2012년도 전력전자학술대회 논문집
• /
• pp.43-44
• /
• 2012

비 절연형 PCS를 사용하였을 때 절연을 할 수 없기 때문에 안전에 대한 위험이 있고 손실이 커서 전체적인 효율이 낮다. 본 논문에서 듀얼 풀 브릿지 컨버터를 사용하여 구현하였다. 각 소자들의 전압, 전류 정격을 줄일 수 있으며 전기적인 절연으로 인하여 안전하다. 또한 승압 비가 홀로 사용했을 때 보다 높으며 고주파 변압기의 턴비를 줄일 수 있다. 본 논문은 1.5[kW]급 듀얼 풀 브릿지 컨버터와 단상 인버터를 이용한 PCS를 설계하고 설계한 파라미터를 구현하여 실험을 통해 검증하였다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 하계학술대회 논문집 Vol.8
• /
• pp.385-386
• /
• 2007

We prepared the Al doped ZnO coating Ag multilayer thin films on glass without substrate heating using FTS system. The structure of multilayer thin films has Al doped ZnO/Ag/Al doped ZnO(AZO/Ag/AZO). The thickness of top and bottom AZO thin films were fixed to 50 nm, respectively and controlled the thickness of Ag thin films with deposition time. As-doped multilayer thin films were prepared at 1mTorr and input power (DC) of 100W at room temperature. To investigate the film properties, we employed four-point probe, UVNIS spectrometer, X-ray diffractometer (XRD), scanning electron microscopy (SEM), Hall Effect measurement system and Atomic Force Microscope (AFM).

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 하계학술대회 논문집 Vol.8
• /
• pp.403-404
• /
• 2007

We prepared the Al doped ZnO (AZO) thin film on polyethersulfon (PES) without any substrate heating by Facing Targets Sputtering (FTS) system. ZnO doped the content of Al 2 wt% was used and the sputtering conditions were gas pressure 1mTorr and input power 100W. The electrical, structural and optical properties of AZO thin films were investigated. To investigate the as-deposited thin film properties, we employed four-point probe, UV/VIS spectrometer, X-ray diffractometer (XRD), scanning electron microscopy (SEM), Hall Effect measurement system and Atomic Force Microscope (AFM).

• Tribology and Lubricants
• /
• 제16권3호
• /
• pp.194-200
• /
• 2000

In order to evaluate the effect of Nb on wear properties of high speed steel(HSS) by powder metallurgy, niobium-alloyed HSS have been prepared by adding 0%, 1%, 3% and 5%Nb to HSS of 6%W-5%Mo-4 %Cr-5%V-5%Co. Sliding wear tests were conducted at various sliding speed conditions under the constant pressure using a pin-on-disc type machine. The results of this study show that the wear resistance of HSS by powder metallurgy was increased by the addition of Nb within the range of sliding speed used in this experimental study. However, the amount of Nb did not improve the wear resistance. It may be due to the thermal stability of carbide and high temperature properties of the matrix containing Nb comparing to that without Nb.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2016년도 추계학술대회 논문집
• /
• pp.232-233
• /
• 2016

본 논문은 계통과 연계된 3상 전압원 인버터를 기반으로 한 BESS의 능동 단독 운전 검출 방법을 제안한다. 제안하는 기법은 PR제어기와 필터를 가지고 기본파 전류와 2차 고조파 전류를 이용해 수행하였다. 단독운전은 BESS로부터 정격전류의 1% 2차 고조파를 주입하기 때문에 PCC점에서의 2차 고조파 전압 변화량을 검출 할 수 있다. 제안하는 기법은 모든 조건하에 정확하고 빠르게 검출 할 수 있다. IEEE와 UL1741에서 제시하는 단독 운전 기준 시험 회로를 구성하여 PSCAD/EMTDC 소프트웨어를 통한 시뮬레이션과 5kW 하드웨어 장치를 통해 제안된 단독 운전 검출 방법을 검증하였다.

• Bulletin of the Korean Chemical Society
• /
• 제19권11호
• /
• pp.1161-1164
• /
• 1998

The catalytic transformation of sterically bulky tertiary stannane n-Bu3SnH by the Cp2MCl2/Red-Al (M=Ti, Zr, Hf) and M(CO)6 (M=Cr, Mo, W) catalysts yielded two kinds of catenated products: one is a cross-linked polystannane as minor product, and the other is hexabutyldistannane (n-Bu3Sn)2 as major product. The distannane was produced by simple dehydrocoupling of n-Bu3SnH, whereas the cross-linked polystannane could be obtained via redistribution/dehydrocoupling combination process of n-Bu3SnH. The redistribution/dehydrocoupling combination process may initially produce a low-molecular-weight oligostannane with partial backbone Sn-H bonds which could then undergo an extensive cross-linking reaction of backbone Sn-H bonds, resulting in the formation of an insoluble polystannane.

• Bulletin of the Korean Chemical Society
• /
• 제18권12호
• /
• pp.1264-1268
• /
• 1997

The poly(methylsilene) (1) was modified with the group 4 metallocene Cp2MCl2/Red-Al (M = Ti, Zr, Hf) combination catalyst and with the group 6 metal carbonyl M(CO)6 (M = Cr, Mo, W) catalyst, producing the highly cross-linked isoluble polymer and the lowly cross-linked soluble polymer, respectively. An interrelationship between molecular weight and percent ceramic residue yield with metal within the respective group was not found. The polymers modified with the group 4 metallocene combination catalysts have higher molecular weight and lower percent ceramic residue yield than the polymers modified with the group 6 metal carbonyl catalysts do. The catalytic activity of group 4 metallocene combinations appears to be higher at ∼100 ℃, but to be lower at very high temperature than those of group 6 metal carbonyls. The pyrolysis of the modified 1 yielded SiC ceramic.

• Bulletin of the Korean Chemical Society
• /
• 제14권5호
• /
• pp.625-631
• /
• 1993

The types of the products of the reactions between RuH(NO)(Cyttp) and alkynes are sensitive to the nature of alkynes. Terminal, nonactivated alkynes (HC${\equiv}$CR, R=Ph, hexyl and $CH_2OH)$ produce acetylide complexes and terminal (HC${\equiv}$CR, R=C(O)Me, COOEt) or internal activated ones (RC${\equiv}$ CR, R=COOMe) lead to form alkenyl complexes. On the other hand, internal nonactivated alkynes (RC${\equiv}$CR, R=Ph) do not show reactivity toward RuH(NO)(Cyttp). These products can be rationalized by the cis-concerted mechanism but the radical pathway appears to work in the reaction of propargyl chloride. From the spectroscopic data, the trigonal bipyramidal structure with a linear NO group is proposed for these products.

• Applied Microscopy
• /
• 제50권
• /
• pp.27.1-27.6
• /
• 2020

Transition metal dichalcogenides (TMD), which is composed of a transition metal atom and chalcogen ion atoms, usually form vacancies based on the knock-on threshold of each atom. In particular, when electron beam is irradiated on a monolayer TMD such as MoS₂ and WS₂, S vacancies are formed preferentially, and they are aligned linearly to constitute line defects. And then, a hole is formed at the point where the successively formed line defects collide, and metal clusters are also formed at the edge of the hole. This study reports a process in which the line defects formed in a monolayer WS₂ sheet expends into holes. Here, the process in which the W cluster, which always occurs at the edge of the formed hole, goes through a uniform intermediate phase is explained based on the line defects and the formation behavior of the hole. Further investigation confirms the atomic structure of the intermediate phase using annular dark field scanning transition electron microscopy (ADF-STEM) and image simulation.