• 터널과지하공간
• /
• 제25권5호
• /
• pp.397-407
• /
• 2015

본 논문에서는 쉴드 TBM 굴진 중 체적손실 산정과 관련한 기존 사례 및 정량적인 산정 방안에 대한 문헌 분석을 수행하여 장비 형상과 운전 중 주요 기계데이터를 활용한 산정 방안을 도출하였다. 도출된 방안은 기존 문헌에 보고된 토압식 및 이수식 TBM 굴진 사례 분석에 적용되었다. 전반적으로 계측 결과와 잘 부합하는 것으로 나타났으며 일부 차이에 대한 분석을 실시하였다.

• 대한한방부인과학회지
• /
• 제29권3호
• /
• pp.35-46
• /
• 2016

Objectives: The aim of this study was to investigate the effect of herbal medicine on obesity and overweight female patients and to gather the information of a proper treatment goal for anti-obesity program in Korean medicine clinic.Methods: 230 subjects were recruited and those data were analyzed for body-mass index (BMI), treatment duration, weight, body fat, muscle volume and body fat/weight loss ratio. It was compared among age groups and severity of obesity.Results: It was achieved to loss 12-13 kg for 105.8 days thru obesity program of Korean medicine clinic. There were no significant differences for BMI loss, weight loss, body fat loss, muscle volume gain and treatment duration among age groups. It was found that there were significant differences among overweight, obesity and severe obesity group for BMI loss, weight loss, body fat loss and muscle volume gain except treatment duration. It was assumed the weight loss for 1 month was 3.2 kg, 4.2 kg, 4.5 kg for each severity group respectively.Conclusions: It was found herbal medicine treatment would be effective for female obesity and expected the patients could achieve 12-13 kg weight loss for 15 weeks treatment including 8-12 weeks herbal medicine administration and BMI loss per month could be 1.22 kg/m², 1.60 kg/m² and 1.70 kg/m² for severity of obesity respectively. Hereafter, further controlled study with more numbers of patients should be needed to determine the goal of medical treatment for obesity.

• 한국지반환경공학회 논문집
• /
• 제16권11호
• /
• pp.29-37
• /
• 2015

최근 급격한 도시화로 인한 신도시, 택지개발지구 등의 증가로 기존 구조물 하부를 통과하는 비개착 강관압입공법의 적용이 증가하는 추세이다. 비개착공법은 시공 중 기존구조물의 정상적인 운영 안정성이 확보되어야 하므로 강관압입에 의한 지표침하의 정밀한 예측이 필수적으로 필요한 공법이다. 강관압입 시 침하를 발생시키는 원인은 강관 선단과 강관과의 직경차에 의한 공극, 원활한 강관압입을 위한 과굴착, 강관과 지반과의 마찰에 의한 공극 발생 등이 있으며, 이는 Shield TBM 시공 시 발생하는 침하 원인과 유사하다. 본 연구에서는 Shield TBM의 침하 예측방법인 Gap Parameter Method와 Volume Loss Method를 이용하여 강관압입 시 침하를 예측하였으며, 현장시험을 통하여 예측방법에 대한 비교 분석을 수행하였다. 그 결과 Volume Loss 예측방법이 현장시험과 가장 유사한 결과로 나타났으나, 추후 예측방법의 Factor 결정 및 비개착공법 전체 침하예측을 위한 적용성 등 추가적인 연구가 필요할 것으로 판단된다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 추계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.95-97
• /
• 2005

Loss in the multi-stacked HTS wires are affected by a number of factor, such as, number of wires used in the stack, direction of external magnetic field and insulation thickness between the wire. This paper examines the effects of the insulation thickness on the magnetization loss of the multi-stacked YBCO coated conductor. Measurements of magnetization loss were performed using 4 different typo of multi-stacked wires and under various angle of external magnetic field. Test results show that loss density per unit volume increased for YBCO coated conductors when thickness of insulation increased. Loss density per unit volume decreased for YBCO coaled conductors when stacking number of tapes increased.

• 한국해양공학회지
• /
• 제17권1호
• /
• pp.55-60
• /
• 2003

The effect of size and volume fraction of ceramic particles, with sliding velocity on the wear properties were investigated for the metal matrix composites fabricated by the pressureless infiltration process. The metal matrix composites exhibited about 5.5 - 6 times the wear resistance compared with AC8A alloy at high sliding velocity, and by increasing the particle size and decreasing the volume fraction, the wear resistance was improved. The wear resistance of metal matrix composites and AC8A alloy exhibited different aspects. Wear loss of AC8A alloy increased with sliding velocity, linearly : whereas, metal matrix composites indicated more wear loss than AC8A alloy at the slow velocity region. However, a transition point of wear loss was found at the middle velocity region, which shows the minimum wear loss. Further, wear loss at the high velocity region exhibited nearly the same value as the slow velocity region. In terms of wear mechanism, the metal matrix composites generally exhibited abrasive wear at slow to high sliding velocity； however, AC8A alloy showed abrasive wear at low sliding velocity and adhesive and melt wear at high sliding velocity.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2002년도 추계학술대회 논문집
• /
• pp.379-384
• /
• 2002

The effect of size and volume fraction of ceramic particles with sliding velocity on the wear properties were investigated for the metal matrix composites fabricated by pressureless infiltration process. The particulate metal matrix composites exhibited about 5.5 - 6 times of excellent wear resistance compared with AC8A alloy at high sliding velocity, and as increasing the particle size and decreasing the volume fraction the wear resistance was improved. The wear resistance of metal matrix composites and AC8A alloy exhibited different aspects. Wear loss of AC8A alloy increased with sliding velocity linearly. whereas metal matrix composites indicated more wear loss than AC8A alloy at slow velocity region, however a transition point of wear loss was found at middle velocity region which show the minimum wear loss, and wear loss at high velocity region exhibited nearly same value with slow velocity region. In terms of wear mechanism, the metal matrix composites exhibited the abrasive wear at slow to high sliding velocity generally, however AC8A alloy showed abrasive wear at low sliding velocity and adhesive and melt wear at high sliding velocity.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2000년도 제21회 KOSCO SYMPOSIUM 논문집
• /
• pp.212-216
• /
• 2000

Combustion phenomenon in scale-downed combustor is investigated. As the combustor volume decreases surface to volume ratio increases. for increased surface to volume ratio means increased heat loss and this increased heat loss affects reaction in combustion chamber. Plastic mini combustor is made. Stoichiometricaly premixed Hydrogen I air gas is used as fuel. Initial chamber pressure and chamber size are varied and the effects are evaluated. Peak pressure decreases with the decrease in chamber height. As initial chamber pressure decreases peak pressure decreases. And this change is more important than scale down effect till the chamber height of 1mm. With this result and further information following the experiments design parameter for micro engine can be established.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1994년도 하계학술대회 논문집 A
• /
• pp.150-152
• /
• 1994

In this paper, the optimum shape design of stator slot of induction motors for iron loss reduction is proposed. To obtain the flux distribution in induction motors, 2-D finite element method with voltage source is employed. The iron loss is calculated from the iron loss data given by the iron manufacturer. To calculate the sensitivity of iron loss to shape variation, the sensitivity analysis of discrete approach is used. The proposed algorithm is applied to a 3-phase squirrel cage induction motor. The nodes at stator slot boundary of the induction motor are defined as design parameters. By controlling these parameters under the constant volume of iron, we can minimize the iron loss. Furthermore, the stator copper loss is reduced by increasing the slot area. So the stator slot area is determined at the point that the summation of iron loss and copper loss of stator is minimized. Since the constraint of constant volume of iron is nonlinear to the design parameters, the Gradient Projection method is used as an optimization algorithm.

• International Journal of Air-Conditioning and Refrigeration
• /
• 제10권4호
• /
• pp.192-200
• /
• 2002

A modified asymmetric rectangular fin is analysed using the two-dimensional separation of variables method. This modified rectangular fin is made by attaching the wing on the top side of a rectangular fin. Heat loss from each side of this modified rectangular fin is calculated. The relative increasing ratio of heat loss between a modified rectangular fin and a rectangular fin is presented as a function of dimensionless fin volume, wing height and the location of the wing. Especially, to show the remarkable effect of the wing on the heat loss, the relative increasing ratios of heat loss between two different volume increasing methods are listed.

• 한국멀티미디어학회논문지
• /
• 제23권5호
• /
• pp.625-632
• /
• 2020

In the diagnosis of lung cancer, the tumor size is measured by the longest diameter of the tumor in the entire slice of the CT. In order to accurately estimate the size of the tumor, it is better to measure the volume, but there are some limitations in calculating the volume in the clinic. In this study, we propose an algorithm to segment lung cancer by applying a custom loss function that combines focal loss and dice loss to a U-Net model that shows high performance in segmentation problems in chest CT images. The combination of values of the various parameters in custom loss function was compared to the results of the model learned. The purposed loss function showed F1 score of 88.77%, precision of 87.31%, recall of 90.30% and average precision of 0.827 at α=0.25, γ=4, β=0.7. The performance of the proposed custom loss function showed good performance in lung cancer segmentation.