• 한국전자통신학회논문지
• /
• 제7권5호
• /
• pp.1061-1066
• /
• 2012

디지털 메모리는 신뢰성, 속도 그리고 상대적인 단순한 제어회로로 인해 지금까지 저장장치로서 널리 사용되어 왔다. 그러나 디지털 메모리 저장능력은 공정의 선폭감소의 한계로 인해 결국 한계에 다다르게 될 것이다. 이러한 저장 능력을 획기적으로 증가시키는 방안의 하나로서 메모리의 셀에 저장하는 데이터의 형태를 디지털에서 아날로그로 변화시키는 것이다. 한 개의 셀과 프로그래밍을 위한 주변회로로 구성된 아날로그 메모리가 0.16um 표준 CMOS 공정에서 제작되었다. 제작된 아날로그 메모리는 저밀도 불활성 메모리, SRAM과 DRAM에서 리던던시 회로 제어, ID나 보안코드 레지스터, 영상이나 음성 저장장치 등에 응용될 것이다.

• 반도체디스플레이기술학회지
• /
• 제19권3호
• /
• pp.118-123
• /
• 2020

In this paper, the design method of asynchronous nonvolatile memory module that can efficiently process and store large amounts of data without loss when the power turned off is proposed and implemented. PSRAM, which takes advantage of DRAM and SRAM, was used for data processing, and NAND flash memory was used for data storage and backup. The problem of a lot of signal interference due to the characteristics of memory devices was solved through PCB design using high-density integration technology. In addition, a boost circuit using the super capacitor of 0.47F was designed to supply sufficient power to the system during the time to back up data when the power is off. As a result, an asynchronous nonvolatile memory module was designed and implemented that guarantees reliability and stability and can semi-permanently store data for about 10 years. The proposed method solved the problem of frequent data loss in industrial sites and presented the possibility of commercialization by providing convenience to users and managers.

• 반도체디스플레이기술학회지
• /
• 제11권2호
• /
• pp.85-91
• /
• 2012

In this paper, the large data processing and suitable FAT32 file system for industrial system using a PLC and CF memory was implemented. Most of PLC can't save the large data in user data memory. So it's required to the external devices of CF memory or NAND flash memory. The CF memory is used in order to save the large data of PLC system. The file system using the CF memory is NTFS, FAT, and FAT32 system to configure in various ways. Typically, the file system which is widely used in industrial data storage has been implemented as modified FAT32. The conventional FAT 32 file system was not possible for multiple writing and high speed data accessing. The proposed file system was implemented by the large data processing module can be handled that the files are copied at the 40 bytes for 1msec speed logging and creating 8 files at the same time. In a sudden power failure, high reliability was obtained that the problem was solved using a power fail monitor and the non-volatile random-access memory (NVSRAM). The implemented large data processing system was applied the modified file system as FAT32 and the good performance and high reliability was showed.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제17권3호
• /
• pp.458-464
• /
• 2017

A magnetic tunnel junction (MTJ) based ternary content addressable memory (TCAM) is proposed which provides non-volatility. A unit cell of the TCAM has two MTJ's and 4.875 transistors, which allows the realization of TCAM in a small area. The equivalent resistance of parallel connected multiple unit cells is compared with the equivalent resistance of parallel connected multiple reference resistance, which provides the averaging effect of the variations of device characteristics. This averaging effect renders the proposed TCAM to be variation-tolerant. Using 65-nm CMOS model parameters, the operation of the proposed TCAM has been evaluated including the Monte-Carlo simulated variations of the device characteristics, the supply voltage variation, and the temperature variation. With the tunneling magnetoresistance ratio (TMR) of 1.5 and all the variations being included, the error probability of the search operation is found to be smaller than 0.033-%.

• 한국전기전자재료학회논문지
• /
• 제16권10호
• /
• pp.865-870
• /
• 2003

The MFIS (Metal-Ferroelectric-Insulator-Semiconductor) capacitors were fabricated using a metalorganic decomposition method. Thin layers of CeO$_2$ were deposited as a buffer layer on Si substrate and BLT thin films were used as a ferroelectric layer. The electrical and structural properties of the MFIS structure were investigated. X -ray diffraction was used to determine the phase of the BLT thin films and the quality of the CeO$_2$ layer. The morphology of films and the interface structures of the BLT and the CeO$_2$ layers were investigated by scanning electron microscopy. The width of the memory window in the C-V curves for the MFIS structure is 2.82 V. The experimental results show that the BLT-based MFIS structure is suitable for non-volatile memory FETs with large memory window.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2009년도 9th International Meeting on Information Display
• /
• pp.1044-1046
• /
• 2009

Here we report the architecture for a non-volatile n-type memory paper field-effect transistor. The device is built using the hybrid integration of natural cellulose fibers (pine and eucalyptus fibers embedded in an ionic resin), which act simultaneously as substrate and gate dielectric, with amorphous GIZO and IZO oxides as gate and channel layers, respectively. This is complemented by the use of continuous patterned metal layers as source/drain electrodes.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 제38회 하계학술대회
• /
• pp.1335-1336
• /
• 2007

Among the emerging non-volatile memory technologies, phase change memories are the most attractive in terms of both performance and scalability perspectives. Phase-change random access memory(PRAM), compare with flash memory technologies, has advantages of high density, low cost, low consumption energy and fast response speed. However, PRAM device has disadvantages of set operation speed and reset operation power consumption. In this paper, we investigated scalability of $Ge_{1}Se_{1}Te_{2}$ chalcogenide material to improve its properties. As a result, reduction of phase change region have improved electrical properties of PRAM device.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 하계학술대회 논문집 Vol.7
• /
• pp.26-27
• /
• 2006

To develop tera-bit level SONOS flash memories, SONOS unit memory and 64 bit flash arrays are fabricated. The unit cells have both channel length and width of 30nm. The NAND & NOR arrays are fabricated on SOI wafer and patterned by E-beam. The unit cells represent good write/erase characteristics and reliability characteristics. SSL-NOR array have normal write/erase operation. These researches are leading the realization of Tera-bit level non-volatile nano flash memory.

• 대한임베디드공학회논문지
• /
• 제14권2호
• /
• pp.79-86
• /
• 2019

For decades, in-memory data structures have been designed for DRAM-based main memory that provides symmetric read/write performances and has no limited write endurance. However, such data structures provide sub-optimal performance for NVM as it has different characteristics to DRAM. With this motivation, we rethink a conventional red-black tree in terms of its efficacy under NVM settings. The original red-black tree constantly rebalances sub-trees so as to export fast access time over dataset, but it inevitably increases the write traffic, adversely affecting the performance for NVM with a long write latency and limited endurance. To resolve this problem, we present a variant of the red-black tree called a hierarchical balanced binary search tree. The proposed structure maintains multiple keys in a single node so as to amortize the rebalancing cost. The performance study reveals that the proposed hierarchical binary search tree effectively reduces the write traffic by effectively reaping the high capacity of NVM.

• 한국정보과학회논문지:컴퓨팅의 실제 및 레터
• /
• 제16권7호
• /
• pp.789-793
• /
• 2010

최근 플래시 메모리 기반 비휘발성 캐시가 저장장치의 성능과 전력 소모 측면에서 효과적인 해법으로 떠오르고 있다. 비휘발성 캐시로 저장장치의 성능을 향상시키고 전력 소모를 줄이기 위해, 가격이 싸고 용량이 큰 multi-level-cell (MLC) 플래시 메모리를 사용하는 것이 좋다. 그러나 MLC 플래시 메모리의 수명은 single-level-cell (SLC) 플래시 메모리보다 훨씬 짧기 때문에 전체 저장장치의 수명이 짧아질 수 있다. 이러한 약점을 최소화하기 위해 SLC 플래시 메모리와 MLC플래시 메모리를 결합한 형태의 비휘발성 캐시를 고려해볼 수 있다. 본 논문에서는 SLC와 MLC를 결합한 플래시 메모리를 버퍼로 사용하는 새로운 하이브리드 하드디스크 구조를 제안한다.