• Journal of Information Processing Systems
• /
• 제16권1호
• /
• pp.155-170
• /
• 2020

Passive ranging is a critical part of machine vision measurement. Most of passive ranging methods based on machine vision use binocular technology which need strict hardware conditions and lack of universality. To measure the distance of an object placed on horizontal plane, we present a passive ranging method based on monocular vision system by smartphone. Experimental results show that given the same abscissas, the ordinatesis of the image points linearly related to their actual imaging angles. According to this principle, we first establish a depth extraction model by assuming a linear function and substituting the actual imaging angles and ordinates of the special conjugate points into the linear function. The vertical distance of the target object to the optical axis is then calculated according to imaging principle of camera, and the passive ranging can be derived by depth and vertical distance to the optical axis of target object. Experimental results show that ranging by this method has a higher accuracy compare with others based on binocular vision system. The mean relative error of the depth measurement is 0.937% when the distance is within 3 m. When it is 3-10 m, the mean relative error is 1.71%. Compared with other methods based on monocular vision system, the method does not need to calibrate before ranging and avoids the error caused by data fitting.

• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 1996년도 International Conference on Agricultural Machinery Engineering Proceedings
• /
• pp.802-811
• /
• 1996

Farmers need alternatives for weed control due to the desire to reduce chemicals used in farming. However, conventional mechanical cultivation cannot selectively remove weeds located in the seedline between crop plants and there are no selective heribicides for some crop/weed situations. Since hand labor is costly , an automated weed control system could be feasible. A robotic weed control system can also reduce or eliminate the need for chemicals. Currently no such system exists for removing weeds located in the seedline between crop plants. The goal of this project is to build a real-time , machine vision weed control system that can detect crop and weed locations. remove weeds and thin crop plants. In order to accomplish this objective , a real-time robotic system was developed to identify and locate outdoor plants using machine vision technology, pattern recognition techniques, knowledge-based decision theory, and robotics. The prototype weed control system is composed f a real-time computer vision system, a uniform illumination device, and a precision chemical application system. The prototype system is mounted on the UC Davis Robotic Cultivator , which finds the center of the seedline of crop plants. Field tests showed that the robotic spraying system correctly targeted simulated weeds (metal coins of 2.54 cm diameter) with an average error of 0.78 cm and the standard deviation of 0.62cm.

• 문화기술의 융합
• /
• 제8권1호
• /
• pp.409-415
• /
• 2022

컴퓨터 비전은 카메라를 이용하여 측정대상의 영상을 획득하고, 추출하고자 하는 특징 값, 벡터, 영역 등을 알고리즘과 라이브러리 함수를 응용하여 검출한다. 검출된 데이터는 사용하는 목적에 따라 다양한 형태로 계산되고 분석한다. 컴퓨터 비전은 다양한 곳에 활용되고 있으며, 특히 자동차의 부품을 자동으로 인식하거나 품질을 측정하는 분야에 많이 활용된다. 컴퓨터 비전을 산업분야에서 머신비전이라는 용어로 활용되고 있으며, 인공지능과 연결되어 제품의 품질을 판정하거나 결과를 예측하기도 한다. 본 연구에서는 자동차 부품의 품질을 판정하기 위한 비전시스템을 구축하고, 생산된 데이터에 5개의 머신러닝 분류 모델을 적용하여 그 결과를 비교하였다.

• 조명전기설비학회논문지
• /
• 제23권10호
• /
• pp.134-142
• /
• 2009

본 논문에서는 인간의 시각을 가장 유사하게 구현한 스테레오 시스템을 이용하여 목표물의 크기를 얻을 수 있는 방법을 제시하고자 하였으며, 기존의 스테레오 시스템에서 발전한 방법으로 물체의 실체 크기에 가깝게 얻을 수 있는 시스템을 제시하고자 하였다. 이에 따라 기존의 교차식 스테레오 시스템에서 변형된 직각 스테레오 비젼 시스템을 제시하였으며, 제시한 시스템의 결과로서 실제 측정하고자 하는 목표물의 크기를 93[%]에서 103[%] 정도로 측정하는 좋은 결과를 얻을 수 있었다. 따라서, 본 논문에서 제시한 직각 스테레오 비젼 시스템은 기존의 로봇 시스템 등의 선비 시스템 분야에서 산업 전반에 걸친 영상 처리의 응용 기법으로서 그 다양성이 매우 많음이 기대된다.

• International Journal of Aeronautical and Space Sciences
• /
• 제12권1호
• /
• pp.43-56
• /
• 2011

An integrated system composed of guidance, navigation and control (GNC) system for autonomous proximity operations and the docking of two spacecraft was developed. The position maneuvers were determined through the integration of the state-dependent Riccati equation formulated from nonlinear relative motion dynamics and relative navigation using rendezvous laser vision (Lidar) and a vision sensor system. In the vision sensor system, a switch between sensors was made along the approach phase in order to provide continuously effective navigation. As an extension of the rendezvous laser vision system, an automated terminal guidance scheme based on the Clohessy-Wiltshire state transition matrix was used to formulate a "V-bar hopping approach" reference trajectory. A proximity operations strategy was then adapted from the approach strategy used with the automated transfer vehicle. The attitude maneuvers, determined from a linear quadratic Gaussian-type control including quaternion based attitude estimation using star trackers or a vision sensor system, provided precise attitude control and robustness under uncertainties in the moments of inertia and external disturbances. These functions were then integrated into an autonomous GNC system that can perform proximity operations and meet all conditions for successful docking. A six-degree of freedom simulation was used to demonstrate the effectiveness of the integrated system.

• 한국산업정보학회논문지
• /
• 제13권1호
• /
• pp.22-29
• /
• 2008

본 논문은 철강공장의 연주공정에서 만들어진 빌렛 소재의 관리를 위해 사용되는 소재 관리문자를 실시간으로 인식하기 위한 비전시스템 개발 결과에 대해 기술한다. 빌렛 재질의 단면에 마킹된 소재 관리문자는 소재가 다음 공정으로 이동하기 전에 공정상에서 실시간으로 인식된다. 문자인식용 비전시스템은 영상획득을 위한 카메라 시스템, 영상을 장거리로 고속 전송하기위한 영상전송 시스템, 기존 시스템과의 인터페이스를 위한 입 출력 장치 및 문자인식용 소프트웨어로 구성된다. 개발된 비전시스템을 실제 철강 선제공정에 설치하여 운용테스트를 실시했다. 테스트를 통해 시스템의 내구성과 신뢰성을 검증하고 최종적으로 문자 인식률을 검증했다. 개발된 시스템에 대해 문자인식 테스트 결과 약 98.6%의 높은 인식률을 가졌다.

• 전기학회논문지
• /
• 제59권11호
• /
• pp.2048-2057
• /
• 2010

Is this paper, a pedestrian inertial navigation system with vision is proposed. The navigation system using inertial sensors has problems that it is difficult to determine the initial position and the position error increases over time. To solve these problems, a vision system in addition to an inertial navigation system is used, where a camera is attached to a pedestrian. Landmarks are installed to known positions so that the position and orientation of a camera can be computed once a camera views the landmark. Using this position information, estimation errors in the inertial navigation system is compensated.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2001년도 춘계학술대회 논문집
• /
• pp.170-173
• /
• 2001

To apply stereo vision system to obstacle recognition system of AGV, we constructed algorithm of stereo matching and distance measuring with stereo image for positioning of object in area. And using this system, we look into the error between real position and measured position, and studied relationship of compensation.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.598-602
• /
• 2003

In this paper, we propose the method to control the position of LDM(Linear DC Motor) using vision system. The proposed method is composed of a vision system for position detecting, and main computer calculates PID control output which is deliver to 8051 actuator circuit in serial communication. To confirm the usefulness of the proposed method, we experimented about position control of a small size LDM using CCD camera which has a performance 30frames/sec as vision system.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 학술대회 논문집 정보 및 제어부문
• /
• pp.184-186
• /
• 2004

This paper is about vision system that exhibits automatic examination of the conditions of shaft's worm. The system is composed of three part : image acquisition, vision algorithm, and user interface. The image acquisition part is composed of motor control, illumination and optics. The vision algorithm examines the parts by labeling algorithm using shaft image. User interface is divided into two parts, user interface for feature registering with control value settings and user interface for examination operation. The automatic inspection system of this research is a tool for final examination of shaft worm. This tool can be practically used in production lines with simple adjustments.