• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2000.11a
• /
• pp.76-80
• /
• 2000

This paper describes a coordinate measuring technique based on optical triangulation using the two images. To overcome the defect of structured light system which measures coordinate point by point, light source is replaced by CCD camera. Pixels in CCD camera were considered as virtual light source. The overall geometry including two camera images is modeled. Using this geometry, the formula for calculating 3D coordinate of specified point is derived. In a word, the ray from a virtual light source was reflected on measuring point and the corresponding image point was made on the other image. Through the simulation result, validation of formula is verified. This method enables to acquire multiple points detection by photographing.

• Proceedings of the IEEK Conference
• /
• 2006.06a
• /
• pp.827-828
• /
• 2006

This paper presents a vehicle control algorithm for Personal Rapid Transit (PRT) system. PRT system is a one-way direction network system which is composed of guideway branches, merging/diverging points. Vehicle control algorithm can be divided into two kinds. Those are merging control algorithm and the other. We emphasized on the merging control algorithm. For that, we first devised a front/virtual front vehicle finding strategies. Properly determined front/virtual front vehicle is the starting point of vehicle control. The objects of merging control are to avoid collision and to pass the merging point fluently. Which implies that jerk constraint and limits of acceleration and deceleration etc. are should be considered. To verify the validation of the vehicle algorithm, we executed simulations and presented test results.

• Journal of Dental Anesthesia and Pain Medicine
• /
• v.21 no.3
• /
• pp.253-260
• /
• 2021

Therapeutic injections into the craniofacial region can be a complex procedure because of the nature of its anatomical structure. This technical note demonstrates a process for creating an extra-oral template to inject therapeutic substances into the temporomandibular joint and the lateral pterygoid muscle. The described process involves merging cone-beam computed tomography data and extra-oral facial scans obtained using a mobile device to establish a correlated data set for virtual planning. Virtual injection points were simulated using existing dental implant planning software to assist clinicians in precisely targeting specific anatomical structures. A template was designed and then 3D printed. The printed template showed adequate surface fit. This innovative process demonstrates a potential new clinical technique. However, further validation and in vivo trials are necessary to assess its full potential.

• Journal of Aerospace System Engineering
• /
• v.15 no.4
• /
• pp.75-84
• /
• 2021

A novel robot-operating-system-based flight and mission state communication node for X-Plane 11 flight control simulation environments and its simulation results were discussed. Although the proposed communication method requires considerable implementation steps compared with the conventional MATLAB/Simulink-based User Datagram Protocol (UDP) block utilization method, the proposed method enables a direct comparison of cockpit-view images captured during flight with the flight data. This comparison is useful for data acquisition under virtual environments and for the development of flight control systems. The fixed/rotary-wing and ground terrain elements simulated in virtual environments exhibited excellent visualization outputs, which can overcome time and space constraints on flight experiments and validation of missionary algorithms with complex logic.

• International conference on construction engineering and project management
• /
• 2015.10a
• /
• pp.195-199
• /
• 2015

Many conventional management methods have emphasized the minimization of required resources along the supply chain. Accordingly, this paper presents a proposed method called the Virtual Design and Construction (VDC)-aided system. It is based on object-oriented resource control, in order to accomplish a feed-forward control monitoring supply chain logistics. The system is supported by two main parts: (1) IT-based Technologies; and (2) VDC Models. They enable the system to convey proactive information from the detection technology to its linked visualization. The paper includes a field study as the system's pre-test: the Scaffolding Works in a LNG Mega Project. The study demonstrates a system of real-time productivity monitoring by use of the RFIDbased Mobile Information Hub. The on-line 'productivity dashboard' provides an opportunity to display the continuing processes for each work-package. This research project offers the observed opportunities created by the developed system. Future work will entail research experiments aimed towards system validation.

• Proceedings of the IEEK Conference
• /
• 2001.06b
• /
• pp.117-120
• /
• 2001

This paper presents a HW/SW co-design environments and its validation for development of virtual component on the 32-bit RISC core which is used in the design of Information-Appliance-On-a-Chip. For the experimental environment, we developed the cycle-accurate instruction set simulator based on SE3208 RISC core of ADChips. To verify the function of RISC core at the cycle level, we implemented the verification environment by grafting this simulator on the Seamless CVE which is a commercial co-verification environment.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2004.03a
• /
• pp.365-368
• /
• 2004

The multi-phase flow analysis in a solid rocket motor is very important when performing the performance of a motor, and prediction of nozzle ablation. However, only in consideration of regular power, it has analyzed as power which a metal particle receives from a flow until now. We conduct analysis and an experiment about the virtual mass clause which will influence at the place where acceleration is big. We aim at the improvement in accuracy of multi-phase flow analysis from the result.

• Proceedings of the Korea Society for Simulation Conference
• /
• 2005.05a
• /
• pp.74-81
• /
• 2005

In this study, we introduce a 3D simulation model to support the design on ACT(Automated Container Terminal) using 3D animation. The developed simulation model simulate virtual operations of ACT and animate the simulated results with real time. We provide several validation points for the design of ACT. And the developed system applied an object-oriented design and C++ programming to increase the reusability and extensibility. We can perform the various simulation experiment and analyze performances to estimate the required number of equipment using developed simulation model.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.28 no.2
• /
• pp.449-456
• /
• 2018

Many organizations divide the network to manage the network in order to prevent the leakage of internal data between separate organizations / departments by sending and receiving unnecessary traffic. The most fundamental network separation method is based on physically separate equipment. However, there is a case where a network is divided and operated logically by utilizing a virtual LAN (VLAN) network access control function that can be constructed at a lower cost. In this study, we first examined the possibility of bypassing the logical network separation through VLAN ID scanning and double encapsulation VLAN hopping attack. Then, we showed and implemented a data leak scenario by utilizing the acquired VLAN ID. Furthermore, we proposed a simple and effective technique to detect and prevent the double encapsulation VLAN hopping attack, which is also implemented for validation. We hope that this study improves security of organizations that use the VLAN-based logical network separation by preventing internal data leakage or external cyber attack exploiting double encapsulation VLAN vulnerability.

• Journal of Microbiology and Biotechnology
• /
• v.32 no.10
• /
• pp.1262-1274
• /
• 2022

Cholangiocarcinoma (CCA) is a complex and refractor type of cancer with global prevalence. Several barriers remain in CCA diagnosis, treatment, and prognosis. Therefore, exploring more biomarkers and therapeutic drugs for CCA management is necessary. CCA gene expression data was downloaded from the TCGA and GEO databases. KEGG enrichment, GO analysis, and protein-protein interaction network were used for hub gene identification. miRNA were predicted using Targetscan and validated according to several GEO databases. The relative RNA and miRNA expression levels and prognostic information were obtained from the GEPIA. The candidate drug was screened using pharmacophore-based virtual screening and validated by molecular modeling and through several in vitro studies. 301 differentially expressed genes (DEGs) were screened out. Complement and coagulation cascades-related genes (including AHSG, F2, TTR, and KNG1), and cell cycle-related genes (including CDK1, CCNB1, and KIAA0101) were considered as the hub genes in CCA progression. AHSG, F2, TTR, and KNG1 were found to be significantly decreased and the eight predicted miRNA targeting AHSG, F2, and TTR were increased in CCA patients. CDK1, CCNB1, and KIAA0101 were found to be significantly abundant in CCA patients. In addition, Molport-003-703-800, which is a compound that is derived from pharmacophores-based virtual screening, could directly bind to CDK1 and exhibited anti-tumor activity in cholangiocarcinoma cells. AHSG, F2, TTR, and KNG1 could be novel biomarkers for CCA. Molport-003-703-800 targets CDK1 and work as potential cell cycle inhibitors, thereby having potential for consideration for new chemotherapeutics for CCA.