• Journal of the Korea Institute of Military Science and Technology
• /
• v.21 no.5
• /
• pp.623-629
• /
• 2018

The acceleration and the angular velocity that include natural frequencies of a missile detected by Inertial Measurement Unit(IMU) are transmitted to the control loop of a missile. The control loop command that is calculated using above signals can cause the resonance of the missile while it flies. Hence it is common to adapt the filter and the control loop for attenuating or eliminating the undesired signals such as natural frequencies. This paper introduces the new test technique using a floating system for performance evaluation of the designed filter and the control loop prior to a flight test. The proposed scheme can check out the degradation property of vibration in the filter and the control loop, while the conventional hardware-in-the-loop simulation(HILS) scheme cannot.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.25 no.11
• /
• pp.787-797
• /
• 2015

In this paper, a cochlea-inspired artificial filter bank(CAFB) was developed in order to efficiently acquire dynamic response of structure, and it was also evaluated via dynamic response experiments. To sort out signals containing significant modal information from all the dynamic responses of structure, it was made to adopt a band-pass filter optimizing algorithm(BOA) and a peak-picking algorithm (PPA). Optimally designed on the basis of El-centro and Kobe earthquake signals, it was then embedded into the wireless multi-measurement system(WiMMS). In order to evaluate the performance of the developed CAFB, a vibration test was conducted using the El-centro and Kobe earthquake signals, and structural responses of a two-span bridge were obtained and analyzed simultaneously by both a wired measurement system and a CAFB-based WiMMS. The test results showed that the compressed dynamic responses acquired by the CAFB-based WiMMS matched with those of the wired system, and they included significant modal information of the two-span bridge. Therefore this study showed that the developed CAFB could be used as a new, economic, and efficient measurement device for wireless sensor networks(WSNs) based real time structural health monitoring because it could reconstruct the whole dynamic response using the compressed dynamic response with significant modal information.

• Journal of Power Electronics
• /
• v.12 no.6
• /
• pp.1003-1010
• /
• 2012

Recent power electronics and variable-frequency motor drive technologies have been applied to air conditioners to improve efficiency and power density. However, the mechanical vibrations and acoustic noise resulting from the compressor still remain as a serious problem. This paper presents the development and implementation of an online disturbance state-filter for the suppression of multiple unknown and time-varying vibrations of air conditioning systems. The proposed design has a form of the state-filter based on a Luenburger-style closed-loop speed observer. An active vibration decoupling strategy with an estimated disturbance is provided, which manipulates a motor torque command. Since the proposed estimation does not require any additional transducers or hardware for obtaining real-time information upon disturbances, it is suitable for retrofitting industrial air conditioners.

• Journal of the Society of Naval Architects of Korea
• /
• v.53 no.6
• /
• pp.482-493
• /
• 2016

The identification of modal damping of a segmented hull model with torsional response is difficult task due to the coupling of modal response. This is because the 1st and 2nd torsional vibration modes are closely spaced in frequency domain leading to the situation that the modal decomposition is difficult to achieve by simple band-pass filter. Present study applied several different modal decomposition methods to derive the damping ratio of different modes. The modal decomposition methods considered in this study are simple band-pass filter, Hilbert vibration decomposition, Wavelet transform and proper orthogonal decomposition. Coupled free decay signal obtained from the torsional hammering test on a segmented hull model was processed with four different methods and the derived damping ratios were compared with each other. Discussions also have been made on the pros and cons of the different methodologies.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2005.11b
• /
• pp.152-155
• /
• 2005

Diesel particulate filter (DPF) is comprised of a number of capillary tubes enclosed by porous ceramic wails, shaped like a plugged duct. Hot gas flows through the DPF along with the exhaust noise from Diesel engine. Based on previous works on the sound propagation through DPF, in this study, losses at entrance, exit, and ceramic walls are considered and the gradients in temperature and flow velocity are considered. Transfer matrix at entrance, monolith, and exit parts are obtained by employing the segmental approach in analyzing the sound propagation through DPF. The predicted transmission loss agrees very well with the empirical one, which is measured by the improved method with correction terms.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2000.06a
• /
• pp.1762-1766
• /
• 2000

Estimation of reverberant time is one of important factor for the calculation of absorption ration of absorption material. In general the digital filter bank has been used for the, estimation of decay curve of the sound pressure in a reverberant room. However at low frequency, it is not easy to get a good linear decay curve for the estimation of reverberant time. Now, wavelet transform is applied to this difficult task, a good result has been obtained at low frequency. The decay curve using wavelet filter bank is better than that using digital filter bank at low frequency. At higher frequency, both curves are similar.

• Journal of the Korean Society of Visualization
• /
• v.17 no.3
• /
• pp.66-69
• /
• 2019

An image compensating algorithm with high-vibration movement is proposed, using optical flow and the Kalman Filter. The temporal motion vector field is calculated by Optical flow and suspicious vectors are removed or adjusted by the Gaussian interpolation method. The high-vibrated vector filled is stabilized by the Kalman filter. Lastly, compensated images are obtained by affine transformation. This proposed algorithm gives good compensated video images on high-vibration situations.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2014.10a
• /
• pp.670-672
• /
• 2014

In this study, we investigate active control of noise transmitted through a window of enclosures minimizing the acoustic power. To reduce noise of the enclosures, passive methods with absorbing material are generally used. The passive methods, however, are limited use due to the vantilation windows. In this case, these windows are path of noise leakage. Feedforward active noise control technology is applied to minimize the sound power from the enclosure. The feedforward controller is implemented with FIR filter based on the transfer functions calculated numerically. The controller reflects the delay due to FIR filter. The noise transmitted through the window is actively controlled, and the reduction of the power is obtained by 15dB.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.25 no.8
• /
• pp.525-531
• /
• 2015

Driving sound is an effective element to promote the product identity of a vehicle by providing customers with attractive sound which reflects the concept of a vehicle. Recently, major automakers are focusing on the target sound setting so that the sound can represent the brand image as well as the unique concept of a vehicle. In this study, a new method of target setting for the driving sound will be introduced based on using formant filter and musical harmonics characteristics. In addition, a target sound suggested from this method will be realized and verified by using active noise control in vehicle.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.37 no.6
• /
• pp.545-550
• /
• 2009

Generally, the smoothing pre-filter of sensor's raw measurement(accelerometer and gyroscope) is used for INS's fast alignment. When the pre-filter is abruptly removed at Navigation-mode entry in vibration environment, INS's initial attitude error can be largely generated. So that we propose initial attitude error reducing methods(monotone increasing of cutoff-frequency, real-time attitude estimation), these are proved by simulation.