• Korean Journal of Computational Design and Engineering
• /
• v.17 no.4
• /
• pp.274-281
• /
• 2012

This paper proposed a control simulation method for design and verification of the transport system in an automobile assembly line based on digital manufacturing system. The design of the transport system involves two major activities: mechanical design (device specification) and electrical design (device behavior and system control). Conventionally, the simulation and emulation system of the transport system focuses on the abstract level, which mainly deals with design verification, alternative comparison, and system diagnosis. Although it can provide overall system visibility in monitoring how well it works in the process and view, its simulation models are not sufficiently realistic to be used for a detailed design or for implementation purposes. In this paper, a digital simulation model for a transport system in an automotive assembly line is constructed by adapting a digital manufacturing methodology. We use the concept of the "Virtual Probe", which transport a carrier instead of the belt of the conveyor. In conclusion, the proposed method is valuable in the process of test run in the shop floor. This method would reduce the time and effort for validating the manufacturing system and improve the productivity and integrity of the control program.

• 한국신재생에너지학회:학술대회논문집
• /
• 2007.06a
• /
• pp.370-373
• /
• 2007

For the development of wind turbine, generally simulator is used. Simulator include wind turbine components. e.g blades, pitch and pitching method, rotor, yaw system, tower, drive train and so on. Few the more, it include a external circumstance. e.g wind speed, wind direction, air density. these basic parameters be used for the control of wind turbine by wind turbine controller in wind turbine simulator. The wind turbine controller can be designed in the wind turbine simulator. But a developer must make the real control system that will be made using PLC or PC or other processor. The developer must verify the function of control system. that is control algorithm , I/O function, communication, sequence and so on. This verification is possible if we substitute the real wind turbine control system for wind turbine controller in the simulator.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2011.11a
• /
• pp.56-58
• /
• 2011

원자력 발전소의 오작동이나 사고는 인명이나 재산상의 큰 피해를 초래하므로 엄격한 안전 기준을 적용하고 있다. 따라서 원자력 발전소의 안전성과 관련된 원전용 제어기는 높은 수준의 신뢰도와 안전도가 요구된다. 이를 위해 디지털 방식의 제어기에 PLC 방식의 제어기와 PLD 방식의 제어기를 사용하여 다양성을 얻고 있다. 본 논문에서는 PLD 방식의 원전용 트립제어기의 Functional Verification을 위하여 RTL 수준의 설계에 대한 Functional Coverage 분석을 사용하였다. 테스트벤치는 System Verilog에서 제공되는 클래스에 기반한 구조적 테스트벤치를 작성하여 사용하였다.

• Journal of The Institute of Information and Telecommunication Facilities Engineering
• /
• v.11 no.2
• /
• pp.52-57
• /
• 2012

In this paper describe configuration about QCM system for image processing device. It presents that QCM's image processing board video from the camera recognized by the PLC's battery removable exact location coordinates to the robot image processing technology to deliver. In addition, QCM video image processing technology for improved data reliability is described. In this paper define the landmarks of battery for obtaining the location coordinates and verify battery the location coordinates acquisition process from field tests of the QCM/QTPE-BUS Battery Exchange System.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.46 no.5
• /
• pp.44-51
• /
• 2009

In this paper, an air conditioner peak power control system using electric power line communication has been developed. The air conditioner power control system using RS-485 communication method is hard to install on the existing buildings due to difficulty in cabling, and the system using wireless communication methods has a weak point of not being able to be used in close space, while the developed system has its own advantages of overcoming the above mentioned obstacles. In addition, the system is extended to support not only single-phase electricity system but also three-phase four-wire electricity system, and therefore can be installed anywhere in the domestic environment. The system also has enhanced the ease of deployment, operational stability and economical efficiency by compact circuit design. Considering the current state requiring the energy sayings, the system would greatly contribute to the widespread use of the air conditioner power control system. The superiority in the performance and stability of the system has been proved by the design verification of each component such as remote air conditioner controller, electric power line gateway and so on, and the field test of the whole system.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.05a
• /
• pp.478-482
• /
• 2002

Recently, the demand for the optical cable is rapidly glowing because the number of internet user increases and high speed internet data transmission is required. To meet this demand, it is necessary to have a sufficient manufacturing capability for mass and high-quality production. But the present optical cable winding system has some serious problems such that the optical cable of radius (6 mm -40 mm) is often piled up and collapsed usually at the edge of the bobbin in the process of the cable winding. It is often necessary to have an additional operator in order to adjust the cable, which causes the productivity decrease. In order to improve a performance of cable winding system which deals with relatively thick cable( radius : 6 mm -40 mm ), we developed a new guiding system for a high-speed self-align cable winding. First of all, the winding mechanism was analyzed. Synchronization logics for the motions of winding, traversing, and the guiding were created and implemented by using the PLC and guiding system controller in a prototype cable winding system manufactured in the CILS( Computer Integrated Large scale System ) lab. An experimental verification was carried out to validate the logic. Results showed that the winding system with the developed guiding system outperformed in reducing pile-up and collapse in the high-speed winding(up to 300 mm/s) compared with the system without the guiding system.