• Journal of Hydrogen and New Energy
• /
• v.22 no.6
• /
• pp.810-818
• /
• 2011

This paper analyzed the suitability about the isolation performance criteria which was based on human impedance and effect of current in IEC 60479-1 on the safety of human being was examined. The method of evaluation by megger and DC voltmeter was analyzed. The differences of isolation performance according to design of high-voltage system were analyzed. The factors which affect the insulation performance were analyzed for HFCV, EV, HEV, etc. through analysis of the isolation performance evaluation method. Finally, design for improved isolation performance was proposed.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.59 no.3
• /
• pp.317-324
• /
• 2010

It was used as measuring system to diagnose insulating condition, by which was kept a insulating resistance of inner stack and at the same time was cooled electrochemical heat of reaction of FCEV(fuel cell electric vehicle) stack that used a compressed hydrogen gas reacting with oxygen in accordance with variation on thermal degradation of nonconductive heat transfer fluid. Consequently it was developed a cylindrical multi-terminal capacitive-conductive sensor that could be attached to the internal surface of cooling system pipe to evaluate capacitance and conductivity of heat transfer fluid.

• Journal of Power Electronics
• /
• v.6 no.1
• /
• pp.1-7
• /
• 2006

This paper is a record of the study on a high efficiency and high power chopper based on the new soft switching method QRAS (Quasi~resonant Regenerating Active Snubber) designed for a Fuel Cell Electric Vehicle (FCEV). This power chopper is basically proposed for 25kHz soft switching. To confirm the practicality and effectiveness of the converter, the fabrication of a prototype-model using IGBTs was completed. Additionally, a 8kW rating test, a light load test, a current discontinuous mode test and a stable operation resonance test was completed. The circuit geometry, the basic operation, and the 8kW one-tenth-prototype test results are reported with a $97.5\%$ efficiency measurement.

• Proceedings of the KIPE Conference
• /
• 2019.11a
• /
• pp.16-18
• /
• 2019

본 논문에서는 연료 전지 전기 자동차에 맞는 새로운 전력 변환 시스템을 제안한다. 연료 전지 전기 자동차의 전력 변환 시스템은 배터리와 같이 구성하여 에너지 저장 불가능, 느린 응답 속도, 낮은 전력 밀도와 같은 연료 전지의 단점을 해결할 수 있다. 하지만 기존의 연료 전지 전기 자동차의 전력 변환 시스템은 두 개의 DC/DC 컨버터를 사용하여 연료 전지와 배터리를 함께 구성함으로써 두 개의 인덕터 개수로 인해 비용이 증가하고 전력 밀도가 낮다는 단점이 있다. 제안하는 전력 변환 시스템은 한 개의 인덕터, 추가적인 스위치와 다이오드를 사용하여 연료 전지와 배터리를 하나의 컨버터로 구성한다. 따라서 기존에 비해 인덕터 개수가 감소함으로써 경제적이고 높은 전력 밀도 달성할 수 있으며, 스위치의 on/off 동작에 따라 승, 강압 동작이 가능하기 때문에 더 많은 연료전지와 배터리의 전압 조건 상황에서 동작할 수 있다.

• Journal of Applied Reliability
• /
• v.17 no.2
• /
• pp.143-149
• /
• 2017

Purpose: In recent years, weight reduction for improving fuel efficiency of the vehicle and cost reduction have been developed. The structure of suspension link is widely used as a single plate press structure which can reduce process and weight compared to existing pipe welding method. However, it was found that the lifetime of a single plate press structure is determined by initial defects that occurred during initial manufacturing rather than fatigue damage caused by driving. Methods: I research the mechanism of failure phenomenon of the single plate press assist arm of rear wheel. In addition, I investigate durability effect parameters to determine the link lifetime in inserting bush into single plate press process through durability test. Conclusion: I discover significant durability effect parameter in inserting bush into single plate press process. It is expected that the durability can be improved by suggesting a bush inserting process inspection guide for similar suspension link like single plate press structure.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.5 no.3
• /
• pp.87-99
• /
• 2001

Technical status and prospect of the subsonic airbreathing propulsion system composed of jet engine fuel feeding system and air intake for missile application is described herein, including analysis of some present airbreathing missiles. Comprehension on this can be applicable both to blow deeply about the same type missiles and to get some basic idea of unmanned air vehicle's and light aircraft's propulsion system.

• Journal of Institute of Control, Robotics and Systems
• /
• v.12 no.12
• /
• pp.1249-1255
• /
• 2006

This paper presents a constant power control logic for perfect starting a microtubine in vehicle. Under extremely low temperature, performance of the start-up system is severely dropped than that of room temperature because of increasing of load of mechanical parts including engine core and drop of the lead-acid battery capacity. Unfortunately, performance drop of lead-acid battery makes severe problems that cause a malfunction of fuel and lubrication system and power fail of digital devices. So we propose the new start-up logic by constant output power control of lead-acid battery using PWM inverter controller for preventing above problems and keeping good performance of start-up system for microturbine. Also, we prove usefulness of new start-up logic through experimental results under $-32^{\circ}C$ ambient temperature.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2017.05a
• /
• pp.353-357
• /
• 2017

The research trends and major technologies of the divert attitude control system(DACS), which is the core of the anti-missile system, are described. The operating concept and characteristics according to the fuel used are summarized. The characteristics of typical weapon system applying solid(SM3 Block IB/IIA) and liquid(THAAD) fuels were discussed. In the future, it will be necessary to study various types of DACS in the strategic concept of the defense weapon system.

• Journal of the KSME
• /
• v.29 no.6
• /
• pp.627-635
• /
• 1989

최근 여러 선진국 등에서 도시환경 보존을 위하여 천연가스 차량에 대한 관심이 고조되어 대부분 천연가스와 기존연료 검용차량을 개발하여 계속 시험 중에 있으며, 천연가스 전용 차량으로서는 미국의 포드사가 1984년에 AFV (alternative fuel vehicle)를 개발하였고 일본의 스즈끼 공업이 1988년 LNG(liquified natural gas) 전용 차량을 개발하여 실용화를 추진하고 있다. 천연가스연 료는 청정에너지라는 장점에 저렴한 가격, 풍부한 매장량, 기존 가솔린이나 디젤엔진 보다 4배 정도 긴 엔진 수명연장, 충돌시 푹발위험에 대한 안전성 등의 장점에도 불구하고 연료통의 큰 부피로 인한 단거리 운행 가능과 충분한 가스충진소 설치 문제 등의 단점이 있으나 최근 기술의 발전속도로 볼 때 이러한 문제점은 조만간에 해결될 것이며 자동차용으로 천연가스의 이용은 세계적으로 확실될 것이라 판단된다. 이러한 세계적인 추세에 따라 국내에서도 냉난방용으로 전기모터 대신 천연가스 엔진구동을 위해 개발에 착수하였으며 단계적으로 자동차용 천연가스 엔진개발을 계획하고 있다.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 1995.10b
• /
• pp.125-130
• /
• 1995

Recently, the vehicle engine requried precision control of Air-Fuel rate and rigid restriction of exhaust gas. Therefore, we demanded excellent measuring equipment so as to improve of engine performance. Specially, throttle valve control is very important part in the engine control, because structure of engine dynamometer system is very important part in the engine control, because structure of engine dynamometer system is very complicate and it has nonlinear elements which is influenced of disturbance about vibration, a heat, a cooling, energy loss so on. In this study, we propose the method that the control technique using Fuzzy Look-up table and we obtained the satisfying result from realized the control system.