• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.353-353
• /
• 2012

채널 도핑이 다른 비대칭 구조를 갖는 NMOSFET의 게이트 전압에 따른 Drain saturation current (IDSAT), maximum transconductance (GM) 및 threshold voltage (VT)와 같은 다양한 변수를 측정하였고 DAHC (Drain avalanche hot carriers) 스트레스에 따른 특성을 추출하였다. 전기적 특성은 반도체 파라미터 분석기를 사용하여 Probe system에서 진행되었다. 문턱전압은 Normal channel dopoing의 경우 0.67 V, High channel doping의 경우 0.74 V로 High channel doping된 소자가 상대적으로 높은 문턱전압을 보였다. Swing의 경우 Normal channel doping의 경우 87 mV/decade, high channel doping의 경우 92 mV/decade으로 High channel doping된 소자가 더 높은 Swing값을 보였다. 스트레스 인가 후 두 소자 모두 문턱전압이 증가하고 ON-current가 감소하였다. High channel doing된 소자의 경우 Normal channel doping된 소자보다 문턱전압의 증가율과 Current 감소율 측면 모두 스트레스에 더 민감하게 반응하였다. 문턱전압이 서로 다른 비대칭 NMOSFET의 핫 캐리어 특성을 비교, 분석결과 스트레스 인가에 따라 채널 도핑이 높아질수록 드레인과 게이트간의 더 높은 전계가 생겨 게이트 산화막과 Si/SiO2 계면의 손상이 더 발생하였다. 따라서 채널 도핑이 상대적으로 높은 트랜지스터가 핫 캐리어에 의한 계면 트랩 생성 비율이 더 높다는 것을 알 수 있다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.374-374
• /
• 2012

반도체 소자의 크기가 100 nm 이하로 감소되면 통상적인 이온 주입 조건인 이온 에너지, 조사량 및 이온 주입 각도뿐만 아니라 Dose Rate 및 모재 온도가 Dopant Profile을 조절하는 데에 있어서 매우 중요한 인자로 작용한다. 본 연구에서는 Ribbon-beam 및 Spot-beam을 사용하여 활성화 열처리 후 Dopant Profile을 분석하였다. 이온 주입은 모든 시편에서 $BF_2$를 가속 에너지 10 keV 및 조사량 $2{\times}10^{15}/cm^2$로 고정하였다. 이온 주입 후 도펀트 활성화는 100% 질소 분위기 하에서 $850^{\circ}C$-30s 조건으로 RTA 열처리를 수행하였다. Boron 및 Fluorine의 Profile은 SIMS 분석을 통하여 구하였다. Spot-beam은 Ribbon-Beam에 비하여 Dose Rate 및 Cooling Efficiency가 높기 때문에 이온 주입 후 더욱 많은 양의 Primary-defect를 발생시키고 이에 따라 두꺼운 비정질 충을 형성한다. $BF_2$ 이온 주입 된 시편에서 B 및 F의 농도 Peak-height는 a/c 계면에 위치하는 것을 관찰하였다. 또한 B 및 F의 농도 Peak-height는 Silicon 모재의 온도가 증가할수록 증가하는 것을 관찰하였다. Silicon 모재의 온도가 증가함에 따라 Active-area의 면저항이 변화하지 않는 상태에서 Vt (Threshold Voltage)가 급격히 감소함을 관찰 하였다. 비정칠 층의 두께가 증가할수록 a/c 계면 하단에 잔존하는 Residual-defect의 양이 감소하고 이는 측면확산을 감소시키는 역할을 한다는 것이 관찰되었다.

• Journal of Sensor Science and Technology
• /
• v.13 no.6
• /
• pp.436-445
• /
• 2004

In this study, a uroflowmetry system was developed to detect a voiding symptom conveniently at home or hospital. A implemented hardware was composed of mechanism and system circuit part, the software was developed to process uroflow data, graph display, extraction of parameter, and evaluation of congregate rate so as to analysis obtaining uroflow data. The following experiment was performed to evaluate an ability of classification and fitness. The curve pattern of uroflow was classified into each symptom. Various parameters were calculated in the curve pattern of each uroflow as follows. The parameters are MFR, AFR, VOL, VT, and FT. A significant difference among parameters was examined by a statistical analysis for extracted parameters between normal and abnormal experimental group. The uroflow data with the various symptom was divided into normal and abnormal group using fuzzy classifier. The result of the fuzzy classification using MFR and AFR was superior by 91.23 % than grouping evaluation including VOL.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.28 no.12
• /
• pp.753-764
• /
• 2015

Among several types of energy saving smart window technologies, the leader, the dynamic EC (electrochromic) window one needs integrated PV (photovoltaics), to minimize expensive electrical wiring as well as to obviate the need for external energy. Self-powered smart windows were reviewed according to PV types used. DSSCs (dye sensitized solar cells) were found to be compatible with EC cells, to have several categories of next generation smart windows such as PECCs (photoelectrochromic cells), PVCCs (photovoltachromic cells), EC polymer PECCs. In addition silicon solar cells and third generation solar cells were investigated. They are summarized in a table showing their advantages and disadvantages respectively for a fast comparison. The strategy to expedite the commercialization of these next generation smart windows includes developing retrofit smart window coverings for use on flexible polymer substrates adhered to the inside surface of a window and easily replaced after use for upto 10 years.

• Proceedings of the KIPE Conference
• /
• 2005.07a
• /
• pp.51-53
• /
• 2005

This paper focuses on the power circuit section of newly developed LSIS inverter for the variable torque application and presents the detailed explanation on the power circuits as well as its application-specific functional performance.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08a
• /
• pp.141-144
• /
• 2007

We demonstrated 4 inch QVGA AMOLED display driven by GaInZnO TFT. The structure of GaInZnO TFT is back channel etch (BCE) which is conventional structure for a-Si TFT. The electron mobility of GaInZnO TFT is $2.6\;cm^2/Vs$ and Vt is 3.8V. It is thought that GaInZnO TFT could be backplane for AMOLED TV.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.9B
• /
• pp.1322-1329
• /
• 2010

As body sensor network (BSN) research becomes mature, the need for managing power consumption of sensor nodes has become evident since most of the applications are designed for continuous monitoring. Real time Electrocardiograph (ECG) analysis on sensor nodes is proposed as an optimal choice for saving power consumption by reducing data transmission overhead. Smart sensor nodes with the ability to categorize lately detected ECG cycles communicate with base station only when ECG cycles are classified as abnormal. In this paper, ECG classification algorithms are described, which categorize detected ECG cycles as normal or abnormal, or even more specific cardiac diseases. Our Euclidean distance (ED) based classification method is validated to be most power efficient and very accurate in determining normal or abnormal ECG cycles. A close comparison of power efficiency and classification accuracy between our ED classification algorithm and generalized linear model (GLM) based classification algorithm is provided. Through experiments we show that, CPU cycle power consumption of ED based classification algorithm can be reduced by 31.21% and overall power consumption can be reduced by 13.63% at most when compared with GLM based method. The accuracy of detecting NSR, APC, PVC, SVT, VT, and VF using GLM based method range from 55% to 99% meanwhile, we show that the accuracy of detecting normal and abnormal ECG cycles using our ED based method is higher than 86%.

• Korean Journal of Agricultural Science
• /
• v.39 no.4
• /
• pp.483-489
• /
• 2012

Preference of stink bugs to various leguminous seeds was evaluated by using VTS (Video Tracking System) in laboratory. Major soybean stink bugs such as bean bug, Riptortus pedestris (Fabricius), one-banded stink bug, Piezodorus hybneri (Gmelin), eastern green stink bug, Nezara antennata (Scott), and sole bug, Dolycoris baccarum (L.) were significantly most attracted to Cheongjakong, a soybean variety, baited fish-net trap, followed by soybean varieties Ilpumgeomjeongkong and Taekwangkong, a peanut variety Daekwangdangkong, a kidney bean variety Gangnangkong, and a adzuki bean variety Jungwonpat, respectively in a soybean field. VTS observation in laboratory showed that R. pedestris and D. baccarum had significantly higher frequency of visit on Cheongjakong, followed by Ilpumgeomjeongkong. However, P. hybneri, N. antennata and Halyomorpha halys (Stal) had significantly higher number of visits on Cheongjakong, Seonnogkong and Jinpumkong, followed by Ilpumgeomjeongkong. The sojourned time of stink bugs, however, was significantly longer on Cheongjakong regardless of species of the bugs. Accordingly, Cheongjakong was evaluated as the most preferred soybean seed by fish-net trap and VTS. Thus, VTS is found to be an effective means to evaluate the food preference of stink bugs.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.4 no.6
• /
• pp.561-569
• /
• 1999

In this paper, the diode bridge-type ZVT(Zero- Voltage Transition) inverter is proposed. It consists of one a auxiliaI${\gamma}$ switch, three resonant inductors and six blockin당 diodes. So, the main advantage of the proposed t torXJ!ogy is the reduction of the auxiliar${\gamma}$ switch compare to the conventional ZVT inverter. The topology of t the propostxl lVT inverter is analyztxl with a description of the control conditions based on the load current. A And the resonant period control for operating the proposed inverter optimally is discussed by using resonant i inductor current ftxxlback. To verify the proposed topology, the detailed simulation and exJX끼mental results i indicate that zero volta당e operation during transition can be achieved.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.11a
• /
• pp.400-400
• /
• 2007

In this study, we investigated liquid crystal (LC) alignment with ion beam (IB) that non contact alignment technique on polyimide and electro-optical characteristics of twisted nematic (TN)-liquid crystal display (LCD) on the polyimide under various ion beam angles. In this experiment, polyimide layer was coated on glass by spin-coating and Voltage-transmittance(VT) and response time characteristics of the TN cell were measured by a LCD evaluation system. The good characteristics of the nematic liquid crystal (NLC) alignment with the ion beam exposured polyimide surface was observed. In addition, it can be achieved the good EO properties, and residual DC property of the ion beam aligned TN cell on polyimide surface.