• 제목/요약/키워드: VDI

검색결과 61건 처리시간 0.024초

악취평가용 Olfactometer의 제작과 희석능 평가 (The Evaluation of Sample Dilution Accuracy in the Development of an Odor Olfactometer)

  • 정구회;손찬웅;박민수;김학민;김선태
    • 한국대기환경학회:학술대회논문집
    • /
    • 한국대기환경학회 2003년도 추계학술대회 논문집
    • /
    • pp.281-282
    • /
    • 2003
  • Olfactometer를 이용한 악취평가방법은 1986년 미국에서 표준방법(ASTM)으로 인정된 후 유럽 공동체(prEN 13725), 독일(VDI), 네덜란드(NVN2820) 등 여러나라에서 표준방법으로 다양하게 활용되고 있다. Olfactometer의 개발은 초기에 가축사육시설 부근의 냄새 유발에 따른 냄새의 정량화와 냄새 제어를 목적으로 발전하였으나, 근래에는 공업화와 산업화에 따른 산단지역에서의 냄새 배출원평가와 관리 및 부지경계에서의 냄새 농도평가의 필요성에 따라 많은 개발과 발전을 이루어왔다. (중략)

  • PDF

240 GHz, 1.485 Gbps 비디오신호 무선 전송 시스템 (A 1.485 Gbps Wireless Video Signal Transmission System at 240 GHz)

  • 이원희;정태진
    • 한국인터넷방송통신학회논문지
    • /
    • 제10권4호
    • /
    • pp.105-113
    • /
    • 2010
  • 240 GHz 대역의 캐리어 주파수를 이용하여 1.485 Gbps 비디오 전송 시스템을 설계 및 시뮬레이션 하였다. 송수신기는 Schottky Barrier 다이오드 기반의 Sub-harmonic 믹서를 이용하였으며 특히, 수신기는 Heterodyne 및 Direct Detection 두 가지 방식을 적용하여 각각의 성능을 시뮬레이션 하였다. 변조방식은 ASK이며, 수신기에서는 Envelop 검출 방식을 사용하였다. 송신기 시뮬레이션 결과 Sub-harmonic 믹서의 LO 전력 7 dBm(5 mW)에서 IF 입력 전력 -3 dBm(0.5 mW)일 때 RF 출력 전력은 -11.4 dBm($73{\mu}W$)이었으며, SSB(Single Side Band) Conversion Loss는 8.4 dB이다. VDI사의 상용모델 WR3.4SHM(220~325 GHz)의 240 GHz에서의 Conversion loss 8.0 dB(SSB)와 근접한 결과를 얻었다. 1.485 Gbps NRZ 신호전송 시뮬레이션 결과 전송신호와 동일한 수신 파형을 얻었다.

Validation and Recommendation of Methods to Measure Biogas Production Potential of Animal Manure

  • Pham, C.H.;Triolo, J.M.;Cu, T.T.T.;Pedersen, L.;Sommer, S.G.
    • Asian-Australasian Journal of Animal Sciences
    • /
    • 제26권6호
    • /
    • pp.864-873
    • /
    • 2013
  • In developing countries, biogas energy production is seen as a technology that can provide clean energy in poor regions and reduce pollution caused by animal manure. Laboratories in these countries have little access to advanced gas measuring equipment, which may limit research aimed at improving local adapted biogas production. They may also be unable to produce valid estimates of an international standard that can be used for articles published in international peer-reviewed science journals. This study tested and validated methods for measuring total biogas and methane ($CH_4$) production using batch fermentation and for characterizing the biomass. The biochemical methane potential (BMP) ($CH_4$ NL $kg^{-1}$ VS) of pig manure, cow manure and cellulose determined with the Moller and VDI methods was not significantly different in this test (p>0.05). The biodegradability using a ratio of BMP and theoretical BMP (TBMP) was slightly higher using the Hansen method, but differences were not significant. Degradation rate assessed by methane formation rate showed wide variation within the batch method tested. The first-order kinetics constant k for the cumulative methane production curve was highest when two animal manures were fermented using the VDI 4630 method, indicating that this method was able to reach steady conditions in a shorter time, reducing fermentation duration. In precision tests, the repeatability of the relative standard deviation (RSDr) for all batch methods was very low (4.8 to 8.1%), while the reproducibility of the relative standard deviation (RSDR) varied widely, from 7.3 to 19.8%. In determination of biomethane concentration, the values obtained using the liquid replacement method (LRM) were comparable to those obtained using gas chromatography (GC). This indicates that the LRM method could be used to determine biomethane concentration in biogas in laboratories with limited access to GC.

The Determination of Anaerobic Biodegradability Rates Livestock Byproducts Using Double First-Order Kinetic Model

  • Shin, Kook-Sik;Yoon, Young-man;Jung, Ha-Il;Hyun, Byung-Geun;Cho, Hyun-Joon;Sonn, Yeon-Kyu
    • 한국토양비료학회지
    • /
    • 제48권5호
    • /
    • pp.542-548
    • /
    • 2015
  • This study investigated methane productions and a degradation rate of organic matters by German standard method, VDI4630 test. In this study, 4 livestock byproducts from livestock farm were selected for the investigation. The objective of this study was to estimate a distribution of organic matters by using the double first-order kinetics model in order to calculate the rate of biodegradable organic matters which degrade rapidly in the initial stage and the persistently biodegradable organic matters which degrade slowly later. As a result, all the byproducts applied in this study showed rapid decomposition in the initial stage. Then the decomposition rate began to slow down for a certain period and the rate became 5 times slower than the initial decomposition rate. This trend of decomposition rate changes is typical conditions of organic matter decompositions. The easily degradable factors ($k_1$) ranged between $0.145{\sim}0.257day^{-1}$ and persistent degradable factors ($k_2$) were $0.027{\sim}0.080day^{-1}$. Among these results, greater organic matter decomposition rates from VDI4630 had greater $k_1$ values (0.257, $0.211day^{-1}$) and smaller $k_2$ values (0.027, $0.030day^{-1}$) for dairy wastewater and forage byproduct, respectively.

A study of submarine combat management system docker-based server virtualization design and performance analysis

  • Son, Sang-Gil
    • 한국컴퓨터정보학회논문지
    • /
    • 제27권12호
    • /
    • pp.121-129
    • /
    • 2022
  • 함정전투체계는 국산화 이후 다양한 함정에 탑재되어 사용되고 있으며 최신 기술을 지속적으로 도입하며 발전을 이루어왔다. 최근 수상함 전투체계는 함정의 한정된 공간과 중량에 대한 제약사항 그리고 체계 안정성을 높이기 위해 가상화 분야 기술 중 서버 가상화와 데스크탑 가상화(Virtual Desktop Infra, VDI) 기술을 적용하였다. 반면, 잠수함 전투체계는 가상화 기술이 적용되지 않아 공간과 중량 제약 그리고 전투체계 효율성 향상에 한계가 있다. 이를 위해 본 논문에서는 도커 기반의 서버 가상화를 적용한 차세대 잠수함 전투체계를 제안한다. 기존 전투체계의 처리장치와 도커 기반 서버 가상화를 적용한 처리장치간 성능분석을 통하여 본 논문에서 제안하는 방법이 차세대 잠수함 전투체계에 적용 가능함을 확인하였다.

방산업체 비대면(재택) 근무를 위한 보안 요구사항 연구 (A study on security requirements for Telecommuting in defense industry)

  • 황규섭;류연승
    • 융합보안논문지
    • /
    • 제23권5호
    • /
    • pp.209-221
    • /
    • 2023
  • 2019년 12월 코로나19 바이러스의 급격한 확산으로 인해 대면 중심의 근무환경이 비대면 중심의 근무환경으로 급격히 전환되었다. 그러나 방산업체의 경우 군과 관련된 기술을 다루는 조직으로 망분리 정책을 적용하고 있어 비대면 적용에 제한이 많은 상태이다. 비대면 근무는 전세계적인 변화이고 향후 급변하는 환경을 고려했을 때 방산업체도 적용해야 하는 시급한 과제이다. 때문에 현재 방산업체가 비대면 근무를 시행하기 위해서는 VPN, VDI, 망연동시스템 등은 필수 요소로 적용되어야 한다. 결국 필연적으로 일부 접점이 발생할 수 밖에 없는데 이로 인해 보안취약점이 증가할 것이며 적극적인 보안관리가 중요하다. 이에 본 논문에서는 미국의 MITER에서 사이버 공격을 체계적으로 탐지하고 대응하기 위해 주기적으로 발표하고 있는 MITRE ATT&CK Framework의 공격전술을 기반으로 공격유형을 선정, 위협을 분석하고 STRIDE 위협 모델링을 적용하여 보안위협을 분류, 구체적인 보안 요구사항을 제시하고자 한다.

Connecting Rod의 强度計算

  • 조영갑
    • 기계저널
    • /
    • 제20권6호
    • /
    • pp.442-447
    • /
    • 1980
  • 내연기관에 있어서 connecting rod는 piston에 작용하는 가스압력과 관성력을 소단부로 부터 shaft를 거쳐 대단부를 통하여 Crankshaft에 전달하는 역할을 한다. 그러므로 기관의 운제중 끊 임없이 인장, 압축, 좌굴, 굽힘등의 하중을 반복하여 받기 때문에 이것에 견딜 충분한 강성을 지해야 한다. 그러나 일반적으로 connecting rod에 작용하는 하중과, 각부분에 나타나는 응력의 해석은 간단하지 않다. 왜냐하면 행정을 수행하는 동안 크랭크의 각 위치에 대하여 가스 압력 이나 관성력이 변하고, 또한 connecting rod 자체의 형상도 복잡하게 구성되기 때문이다. 따라서 보다 계산을 간단하게 하기 위하여 여기에서는 일단 connecting rod에 작용하는 하중은 최악조 건으로서 최대발압력 및 최대관성력을 적용하기로 하고, 계산결과에 따라 취약부위에 대한 은 력을 검토하기로 한다. 특히 대단부에 있어서는 cap을 연결하는 보울트가 불리면에 작용하는 하중을 충분히 견딜 수 있어야 하므로 보울트계산 또한 중요하나 여기서는 취급치 않고, 다만 이 계산에서 구한 하중을 사용하여 VDI 2230에 의한 방법으로 계산하면 될 것이다.

  • PDF

업무문서 중앙화 서비스 제공을 위한 클라우드 시스템 운영방안 (An Operation of Cloud System for the Centralization Services of Business Documents)

  • 윤용;김연성
    • 한국IT서비스학회지
    • /
    • 제13권4호
    • /
    • pp.309-324
    • /
    • 2014
  • This case study focuses on the preparing a guide for the plan to the companies that want to build a business document system for the centralized services under the cloud computing. Total 3 Operating companies with regard to cloud computing issues are introduced for this purpose. Analyzing the usage and development direction of the selected companies were performed to set up plans. Through this in-depth needs of the user's point of view for the management of business documents, The necessary improvements in the process of collaboration and document sharing were derived. Business documents centralized service plans were proposed based on cloud computing models. Practical experiences of the companies were helpful to present the details of the operational strategy and operational plans. Especially with minimal staff input and verification process, Sample method for the automatic generating of the new document file name is introduced. A test bed before operating the enterprise-wide system were presented with information that is to be considered when building systems.

계통 안정도 모의를 통한 전력계통의 무력화 방안 (The Incapacition Method of Power System Assessing Transient Stability Index and Voltage Drop/Rise Duration Index)

  • 임재성;강현구;김택원;문승일;임완권
    • 한국군사과학기술학회지
    • /
    • 제12권4호
    • /
    • pp.532-539
    • /
    • 2009
  • When assailing some area, it is important to consider targeting power system. This paper describes effective method that power networks are incapacitated based on assessing TSI and VDI. For this, we compose realistic scenario and analyze the simulation results in a view of stability. The simulation results show the destruction effects when occur the contingency in the specified area. To perform this process, the simulation tool PSS/E and DSAT are used.

산업용 퍼지제어 시스템의 표준화 동향 (On Standardization of Fuzzy Control Systems with Industrial Applications)

  • 최종수;이기범;권오신
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 1999년도 하계학술대회 논문집 B
    • /
    • pp.758-760
    • /
    • 1999
  • To promote fuzzy logic in industrial applications, the German Association of Mechanical and Electrical Engineers(VDI/VDE) established the work group UA451, focusing on "Fuzzy Logic and Fuzzy Control" in 1991. The group focuses on two activities: providing information platforms for designers to exchange project experiences and fuzzy logic standardization. This article presents some of the intermediate results of the standardization activities and discusses future standards for fuzzy logic systems.

  • PDF