• Journal of the Korean Ceramic Society
• /
• v.25 no.3
• /
• pp.277-283
• /
• 1988

Extremely fine $TiO_2$ powders were synthesized from titanium chloride by the precipitation and freeze drying method. The phase transformation and electrical conductivity were investigated as a function of temperature. X-ray analysis showed that the phase transformation of the synthesized powder from the anatase to rutile occured at 64$0^{\circ}C$ and finished at 92$0^{\circ}C$ due to small particle size and large specific surface area. The activation energy obtained from electrical conductivity vs. temperature was about 1.63eV. This relatively large value was due to porosity in the specimen.

• Proceedings of the Korean Society Of Semiconductor Equipment Technology
• /
• 2003.12a
• /
• pp.45-49
• /
• 2003

본 논문에서는 gate 산화막을 위한 Hf oxide 박막을 $Hf(dmae)_4$ (dmae=dimethylaminoethoxide) 전구체로 Direct Liquid Injection Metal Organic Chemical Vapor Deposition (DLI-MOCVD)방법을 이용하여 p-type Si(100) 기판 위에 증착하였다. 이 전구체를 이용하여 $150^{\circ}C$의 낮은 증착 온도에서도 낮은 carbon 농도와 roughness를 가지는 양질의 박막을 증착할 수 있었다. 증착된 박막은 비정질 구조를 나타내었지만 annealing 온도를 증가시킴에 따라서 결정성(monoclinic phase)을 나타내었다. $500{\AA}$으로 증착한 박막을 C-V 와 I-V curve를 통하여 전기적 특성을 평가하였다. 열처리 온도가 증가함에 따라 유효유전상수(k)는 증가하지만 열처리 온도가 $900^{\circ}C$ 이상이 되면 계면층의 형성에 의해 유효유전상수는 감소하게 되고 이에 따라 누설 전류도 감소하게 된다. 산소분위기 $800^{\circ}C$에서 annealing한 $HfO_2$ 박막의 유전상수는 20.1이고, 누설 전류 밀도는 SV에서 $2.2\times10^{-6}A/\textrm{cm}^2$ 로 좋은 전기적 특성을 가진다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.05b
• /
• pp.179-184
• /
• 2000

The I-V characteristics of $ZnO-Pr_6O_{11}-CoO-Dy_2O_3$ based varistors were investigated in the $Pr_6O_{11}/CoO$ composition ratio range of 0.5/0.5 to 1.0/1.0 and sintering temperature range of 1300 to $1350^{\circ}C$ as the basic study to develop the advanced $Pr_6O_{11}$-based ZnO varistors. All varistors except for $Pr_6O_{11}$/CoO = 0.5/1.0 exhibited the best I-V characteristics at $1350^{\circ}C$. However, the varistors with $Pr_6O_{11}$/CoO= 0.5/1.0 exhibited the best I-V characteristics at $1350^{\circ}C$. The varistors with $Pr_6O_{11}$/CoO= 0.5/1.0 of all varistors exhibited the best I-V characteristics, which the nonlinear exponent is 36.9 and the leakage current is 7.6 ${\mu}A$ Therefore, it was estimated that ZnO-$Pr_6O_{11}-CoO-Dy_2O_3$ ceramics with $Pr_6O_{11}$/CoO= 0.5/1.0 will be usefully used as varistor materials in the future.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.17 no.12
• /
• pp.1332-1336
• /
• 2004

Amorphous carbon (a-C) films have been deposited on Si(100) substrate using RF magnetron system in order to investigate the electron field emission properties. The a-C films were treated by $N_2$ gas plasma at room temperature. Surface morphologices and structural properties of the a-C films before and after $N_2$ plasma treatment were observed by scanning electron microscopy and Raman spectroscope, respectively. Structural properties and surface morphology of the a-C films were changed by $N_2$ plasma treatment. The emission properties can be improved by the plasma treatment according to the contents of nitrogen on the a-C films which is varied by plasma treatment time. Before the plasma treatment, the a-C films are found to have a threshold field of 14 V/$\mu$m, but the a-C film treated by $N_2$ plasma for 30 min exhibit threshold field as low as 6.5 V/$\mu$m.

• Journal of the Korean Applied Science and Technology
• /
• v.39 no.5
• /
• pp.589-595
• /
• 2022

The white OLED is fabricated with the anthracene-based blue emitting material, 9-(2-naphthyl)-10-(p-tolyl)anthracene (2-NTA) in various volume-ratios of orange dopant, rubrene, which results in pure white emission with C.I.E. coordinate of ~(0.32, 0.39). The devices with <1.5% rubrene show better EL properties (efficiency) than >3% devices. Furthermore the turn-on voltage of 2-NTA WOLED (3.7 V) is lower than that of 2-NTA blue OLED (5.4 V) at the same condition. Conclusively 2-NTA with rubrene less than 1.5% (v/v) could be utilized for the pure WOLED.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.7 no.2
• /
• pp.216-223
• /
• 1997

By using aluminum iso - propoxide($Al(OC_3H_7)_3$, AIP), $Al_2O_3$thin films were deposited on (100) single crystal silicon wafer by MOCVD method. The compositions of deposited films were analysed by electron spectroscopy for chemical analyse(ESCA). The morphology and thickness of the deposited films were characterized by scanning electron microscopy. The refractive index and C-V propertied were studied by using ellipsometery and HP4192A, respectively. From the results of ESCA and SEM analysis at low pressure, more uniform and stable stoichiometric film can be obtained compared with that of atmospheric pressure. For optical film usage, required refractive index can be obtained by heat treatment of deposited film. To improve C -V characteristics in NMOS device, it is requred to control OH-which is mobile charge in oxide, to form $SiO_2$ layer between $Al_2O_3$ and Si by heat treatment.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.44 no.7 s.361
• /
• pp.37-44
• /
• 2007

A low-voltage high-linear bipolar OTA and its application to IF bandpass filter for GSM cellular telephone are presented. The OTA consists of a low-voltage linear transconductor, a translinear current gain cell, and three current mirrors. The bandpass filter is composed of two cascaded identical second-order bandpass filters, which consist of a resistor, a capacitor, and a grounded simulated inductor realized with two OTA's and a grounded capacitor. SPICE simulations using an 8 GHz bipolar transistor-array parameter show that the OTA with a transconductance of 1 mS exhibits a linearity error of less than ${\pm}2%$ over an input voltage range of ${\pm}0.65\;V$ at supply voltages of ${\pm}2.0\;V$. Temperature coefficient of the transconductance is less than $-90ppm/^{\circ}C$. The bandpass filter has a center frequency of 85 MHz and Q-factor of 80. Temperature coefficient of the center frequency is less than $-182ppm/^{\circ}C$. The power dissipation of the filter is 128 mW.

• Journal of IKEEE
• /
• v.24 no.4
• /
• pp.1058-1063
• /
• 2020

This paper proposes a 12-bit SAR A/D(Successive Approximation Register Analog-to-Digital) converter that operates at low power for bio-signal and sensor signal processing. The conventional SAR A/D converter utilized the reduction of the dynamic current, which resulted in reducing total power consumption. In order to solve the limitation of the sampling time due to charging/discharging of the capacitor for reducing dynamic current, the different sampling time on the C-DAC bit switch operation was applied to reduce the dynamic current. In addition, lowering the supply voltage of the digital block to 0.6V led to 70% reduction of the total power consumption of the proposed ADC. The proposed SAR A/D was implemented with CMOS 65nm process 1-poly 6-metal, operates with a supply voltage of 1.2V. The simulation results demonstrate that ENOB, DNL/INL, power consumption and FoM are 10.4 bits, ±0.5LSB./±1.2LSB, 31.2uW and 2.8fJ/step, respectively.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.09a
• /
• pp.9-12
• /
• 2001

The $Sr_{0.8}Bi_{2.4}Ta_2O_9(SBT)$ thin films are deposited on Pt-coated electrode($Pt/TiO_2/SiO_2/Si$) using RF magnetron sputtering method. With increasing post-annealing temperature from $600[^{\circ}C]$ to $850[^{\circ}C]$, Bi-layered perovskite phase was crystallized above $650[^{\circ}C]$. The maximum remanent polarization and the coercive electric field is 11.60[${\mu}C/cm^{2}$] 48[kV/cm] respectively. The leakage current density of SBT capacitor at post-annealing temperature of $750[^{\circ}C]$ is $1.01{\times}10^{-8}A/cm^2$ at 100[kV/cm]

• 보존과학연구
• /
• s.15
• /
• pp.21-32
• /
• 1994

Optimum conditions for benzene synthesis and liquid scintillation counting have been studied for the determination of radiocarbon age. In benzene synthesis the carbon dioxide converted to benzene with high efficiency of 91%. Yields of each step with 10L of carbon dioxide were $CO_2$ $\rightarrow$$C_2H_2$(94%), $C_2H_2$$\rightarrow$$C_6H_6$(96%) and$CO_2$$\rightarrow$$C_6H_6$(91%), respectively. Benzene synthesized from oxalate was measured with purity of 95% by GC /MS. $\delta^13$(C$^13$C/$^12$C) of oxalate was measured to $-24.7\{textperthousand}$ by massspectrometer. For liquid scintillation counting of benzene sample low background and highest FOM were measured in 0.5 ml cocktail and 3 ml standard solution with the range of 15.4∼74.9 KeV window setting. Oxalate and background samples weremeasured to $28.7\pm0.12$cpm and $3.92\pm0.04$ cpm in 15.4∼74.9 KeV