• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1997년도 하계학술대회 논문집 A
• /
• pp.230-233
• /
• 1997

In this study, design and analysis of 3-phase induction moter are as follows. - Motor characteristics analysis by equivalent circuit ${\cdot}$ Motor characteristics analysis according to variation of rotor slot-tip ${\cdot}$ Motor characteristics analysis according to variation of rotor slot-mouse ${\cdot}$ Motor characteristics analysis according to variation of rotor slot-opening

• Current Optics and Photonics
• /
• 제6권3호
• /
• pp.323-331
• /
• 2022

Electro-optic modulator (EOM) takes a vital role in connecting the electric and optical fields. Here, we present a heterogeneously integrated EOM based on the lithium niobate-on-insulator (LNOI) platform. The key modulation waveguide structure is a field-enhanced slot waveguide formed by embedding silicon nanowires in a thin-film lithium niobate (LN), which is different from the previously reported LN ridge or etchless LN waveguides. Based on such slot structure, optical mode field area is reduced and enhanced electric field in the slot region can interact well with LN material with high Electro-optic (EO) coefficient. Therefore, the improvements in both aspects have positive effects on enhancing the modulation performance. From results, the corresponding EOM by adding such modulation waveguide structure achieves better performance, where the key half-wave-voltage-length product (V_𝜋L) and 3 dB EO bandwidth are 1.78 V·cm and 40 GHz under the electrode gap width of only 6 ㎛, respectively. Moreover, Lower V_𝜋L can also be achieved. With these characteristics, such field-enhanced waveguide structure could further promote the development of LNOI-based EOM.

• 한국정보통신학회논문지
• /
• 제10권2호
• /
• pp.386-391
• /
• 2006

본 논문에서는 유니 플래너 급전구조를 갖는 V형 선형 테이퍼드 슬롯 안테나를 설계하였다. 설계에 사용한 유전체 기판은 두께가 0.762mm이고 비유전율이 3.0인 PTFE 기판이며 손실 탄젠트는 0.001이다. 또한 중심 주파수는 5.8GHz로 설계하였으며 급전선로의 실현은 Hammerstad에 의한 식을 사용 하였다. V-LTSA의 S11과 VSWR의 시뮬레이션 결과를 얻었으며 -10dB를 기준으로 할 때 대역폭은 약 4.3GHz이었고 VSWR은 약 1.8 Octave의 광대역 특성을 나타내었다.

• 대한전자공학회논문지TC
• /
• 제40권11호
• /
• pp.85-92
• /
• 2003

본 논문에서는 5㎓ 대역에서 동작하는 다중 V-슬롯 모양의 마이크로스트립 안테나를 설계하고 제작하였다. 단일 U-슬롯 모양 위에 두 개의 작은 역 U-슬롯 모양을 갖도록 하였으며 접지면과 기판사이에 공기층을 삽입하여 충분한 대역을 얻고자 하였다. 여러 파라메타, 큰 U 슬롯모양 가로 길이, 세로 길이, 너비, 위치 그리고 두 개의 역 U 슬롯 모양 간격, 급전 위치 그리고 공기갭의 두께를 최적화시킨 후에 다중 U-슬롯 모양의 마이크로스트립 안테나가 제작되었으며 제작된 안테나의 측정결과는 다음과 같다. VSWR<2.0에서 20.4%의 대역폭과 5.5㏈i의 이득과 방사패턴을 얻었다.

• 한국전자파학회논문지
• /
• 제13권8호
• /
• pp.769-776
• /
• 2002

본 논문에서는 균일한 슬롯 폭을 갖는 5 GHz 대역 보우타이 형태의 미앤더 슬롯 안테나를 제안한다. 보우타이 슬롯안테나는 광대역 특성을 갖는 반면 크기가 크다는 단점이 있고, 미앤더 슬롯 안테나는 소형이지만 대역폭이 좁다. 그러므로 광대역 특성을 갖는 소형 안테나의 개발을 위하여, 일반적인 형태의 미앤더 슬롯을 보우타이 형태로 변화시켰다. 모의실험결과, 제안된 안테나는 같은 슬롯 폭과 슬롯 길이를 갖는 미앤더 슬롯 안테나보다는 대역폭이 3배정도 넓고, 같은 크기를 갖는 보우타이 슬롯 안테나보다는 공진 주파수가 3.01 GHz낮아짐을 볼 수 있었으며, 측정결과, 제안된 안테나는 소형이지만, 대역폭이 218 MHz(5.142 GHZ - 5.360 GHz)로써 원하는 동작 주파수(5.15 GHz - 5.35 GHz)를 만족한다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 추계학술대회 논문집 학회본부 C
• /
• pp.749-751
• /
• 1998

In this study, the wind-mill type ultrasonic motor was fabricated, and then revolution and temperature characteristics of the ultrasonic motor were measured. Brass metal was pressed with umbrella-type using metal mold, then slot of 4 kind was processed in each of thickness. Among sixteen's ultrasonic motors, heat loss on applied voltage was much at stator of the highest resonant point, but heat loss on applied voltage was almost neglected at the lowest resonant point of stator. The thickener thickness of elastic body, revolution speed was decreased. The more slot of elastic body, revolution speed was increased. Applied voltage was changed from $10V_{max}$ to $100V_{max}$. When applied voltage was under $20V_{max}$, ultrasonic motor was not rotated. When applied voltage was over $90V_{max}$, revolution of ultrasonic motor was saturated. Maximum revolution speed was 510[rpm].

• 한국전자파학회논문지
• /
• 제14권1호
• /
• pp.75-80
• /
• 2003

본 논문에서는 기존 원형 링 마이크로스트립 슬롯 안테나의 방사소자 일부를 제거하고, 길이가 서로 다른 십자슬롯을 부설하여 원형편파를 구현하고, 안테나 크기를 소형화시킨 새로운 구조의 안테나를 제안하였다. 급전구조는 입력단 설계가 간단하고 정합이 쉬운 전자파 결합방식을 사용하였고, Ansoft HFSS V8.0으로 최적화한 후 제작 및 측정하였다. 제안된 안테나는 GPS(1.5 GHz)대역에서 1.9 %의 축비 대역폭(AR$\leq$3 dB)을 나타내었고, LHCP$.$RHCP 각각의 구조에서 7.74 %의 임피던스 대역폭(VSWR$\leq$2)을 나타내었다. 이는 기존의 원형링 마이크로스트립 슬롯 안테나의 임피던스 대역폭 및 축비 특성을 보다 더 개선한 것이다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회B
• /
• pp.2798-2803
• /
• 2008

The confined slot air jet impinging normally on a moving flat surface has been investigated numerically by using commercial CFD code Ansys CFX-V11. Turbulent flows are modeled using k-w turbulence model. Two-dimensional turbulent flow is considered. Calculations were conducted for a nozzle-to-plate spacing of eight slot nozzle width, at three Reynolds number(Re=4500, 6700 and 10,000) and four surface-to-velocity ratios i.e. 0, 0.25, 0.5 and 1. Results are compared against corresponding cases for heat transfer from a stationary plate. Local Nusselt number is calculated under constant wall temperature condition. The analysis reveals that the average Nusselt number increases considerably with the jet exit Reynolds number, but decrease with the plate velocity.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제55권4호
• /
• pp.178-182
• /
• 2006

Five model coils of 6.6 kV motor were manufactured with several defects. These stator coils have artificial defects such as void of groundwall insulation, removal of semi-conductive coating and damage of strand insulation. Epoxy-mica coupler(80 pF) was connected to five model coil terminals. The voltage applied to the coils was 3.81 kV, 4.76 kV, 6.0 kV and 6.6 kV, respectively. Partial discharge(PD) tests performed in the laboratory and shield room. Digital PD detector(PDD) and turbine generator analyzer(TGA) were used to measure PD activity. TGA summarizes each plot with two quantities such as the normalized quantity number(NQN) and the peak PD magnitude(Qm). The PD levels in pC were measured with PDD. PD patterns of model coils were indicated the internal and slot discharges. PD patterns are consistent with the result of measurement using PDD and TGA instruments. AC breakdown test was performed on five model coils in order to confirm the result of PD measurements. All the failures were located in a line-end coil at the exit from the core slot.

• Journal of the Korean Physical Society
• /
• 제73권9호
• /
• pp.1362-1369
• /
• 2018

A method aimed at improving the beam-wave interaction efficiency by changing the coupling slot configuration has been proposed in the study of extended interaction oscillators (EIOs). The dispersion characteristics, coupling coefficient and interaction impedance of the high-frequency structure based on different types of coupling slots have been investigated. Four types of coupled cavity structures with different layouts of the coupling slots have been compared to improve the beam-wave interaction efficiency, so as to analyze the beam-wave interaction and practical applications. In order to determine the improvement of the coupling slot to a coupled cavity circuit in an EIO, we designed four nine-gap EIOs based on the coupled cavity structure with different coupling slot configurations. With different operating frequencies and voltages takes into consideration, beam voltages from 27 to 33 kV have been simulated to achieve the best beam-wave interaction efficiency so that the EIOs are able to work in the $2{\pi}$ mode. The influence of the Rb and the ds on the output power is also taken into consideration. The Rb is the radius of the electron beam, and the ds is the width of the coupling slot. The simulation results indicate that a single-slot-type EIO has the best beam-wave interaction efficiency. Its maximum output power is 2.8 kW and the efficiency is 18% when the operating voltage is 31 kV and electric current is 0.5 A. The output powers of these four EIOs that were designed for comparison are not less than 1.7 kW. The improved coupling-slot configurations enables the extended interaction oscillator to meet the different engineering requirements better.