• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회A
• /
• pp.1132-1135
• /
• 2008

The sludge grown up in steam generators of nuclear power plants shortens the life-cycle of steam generators and reduces the output of power plants. So KHNP(Korea Hydro and Nuclear Power), the only nuclear power utility in Korea, removes it periodically using a steam generator lancing system during the outage of plants for an overhaul. KEPRI(Korea Electric Power Research Institute) has developed lancing systems with high pressured water nozzle for steam generators of nuclear power plants since 2001. In this paper, the design of a partial inter-tube lancing system for model F type steam generators will be described. The system is actuated without a DC motor inner steam generators because the motors in a steam generator make a trouble from high intensity of radioactivity as a break down.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1990년도 하계학술대회 논문집
• /
• pp.68-71
• /
• 1990

In this paper, it is introduced about Auto-Tuning Method which applied to Expert Controller. This method constructs heuristic knowledge of the tuning experiment in order to realize relay tuning theory of Astrom &. Hagglund. This method applies to various Plant and showes utility which is used for Controller design of PID group. Result of simulation showed superiority for speed reponse and robustness of all Plant.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 2005년도 춘계학술발표회
• /
• pp.1221-1222
• /
• 2005

Interface control activities during the nuclear power plant (NPP) construction and operation have been reviewed for enhancing the safety of NPP. The primary focus of the study is given on analysis of lessons learned from the recent significant events of Korean Standard Nuclear Power plant (KSNP), such as a series of break-off of thermal sleeves at YGN 5 & 6 and radioactivity leak at YGN 5, in respect of interface control. Based on the results of the analysis, this study recommends measures for the improvement of interface control among utility and technical supporting organizations (TSO), and suggests new regulatory systems, such as reporting of safety significant non-conformances, to effectively verify the adequacy of interface control activities during construction and operation of NPPs.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 하계학술대회 논문집 A
• /
• pp.409-411
• /
• 2003

As power demand increases gradually, the call for underground transmission system increases. But it is very difficult and high in cost to construct new ducts and/or tunnels for power cables in metropolitan areas. HTS (High Temperature Superconducting) cable has the several useful characteristics such as increased power density. Therefore HTS cable can allow more power to be moved in existing ducts, which means very large economical and environmental benefits. In this paper, we carried out investigation for Application of 22kV class HTS cable in Korean utility networks. The results show that the HTS cable is applicable to replace IPB in pumping-up power plant, withdrawal line in distributed generation, withdrawal line in complex power plant, and conventional under ground cable. Finally, as the cost of HTS wire and refrigeration drops, the technical and economical potential of HTS cable is evaluated positively.

• 조명전기설비학회논문지
• /
• 제26권5호
• /
• pp.48-57
• /
• 2012

This paper analyzes the characteristic of gird connected photovoltaic power generation system which is available to connect the utility. Renewable energy photovoltaic power system has been linked to the system to analyze the impact of photovoltaic system. It is measured that power data for the Grid connected photovoltaic power plant with instantaneous measuring and 3-sec measuring for 7 days. Harmonic field measurements have shown that the harmonic contents of a waveform varies with time. A cumulative probability approach is the most commonly used method to solve time varying harmonics. So, it is used 50[%] cumulative probability approach. This paper provides an in depth analysis on power quality field measurement of the Grid connected photovoltaic power plant.

• 한국식물생명공학회:학술대회논문집
• /
• 한국식물생명공학회 2006년도 한국육종학회 공동심포지엄 및 학술대회
• /
• pp.6-6
• /
• 2006

• BMB Reports
• /
• 제40권4호
• /
• pp.577-587
• /
• 2007

Single-copy chloroplast loci are used widely to infer phylogenetic relationship at different taxonomic levels among various groups of plants. To test the utility of chloroplast loci and to provide additional data applicable to hybrid evolution in Musa, we sequenced two introns, rpl16 and ndhA, and two intergenic spacers, psaA-ycf3 and petA-psbJ-psbL-psbF and combined these data. Using these four regions, Musa acuminata Cola(A)- and M. balbisiana Colla (B)-containing genomes were clearly distinguished. Some triploid interspecific hybrids contain A-type chloroplasts (the AAB/ABB) while others contain B-type chloroplasts (the BBA/BBB). The chloroplasts of all cultivars in 'Namwa' (BBA) group came from the same wild maternal origin, but the specific parents are still unrevealed. Though, average sequence divergences in each region were little (less than 2%), we propose that petA-psbJ intergenic spacer could be developed for diversity assessment within each genome. This segment contains three single nucleotide polymorphisms (SNPs) and two indels which could distinguish diversity within A genome whereas this same region also contains one SNP and an indel which could categorize B genome. However, an inverted repeat region which could form hairpin structure was detected in this spacer and thus was omitted from the analyses due to their incongruence to other regions. Until thoroughly identified in other members of Musaceae and Zingiberales clade, utility of this inverted repeat as phylogenetic marker in these taxa are cautioned.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제49권6호
• /
• pp.287-298
• /
• 2000

The UCA is a standard-based approach to utility communications which provides for wide scale integration of functional areas including customer interface, distribution, transmission, power plant, control center, and corporate information systems. Field devices in the power facilities require real-time communications, and they must be interconnected into fieldbus. This study introduces a method of implementing gateway that interfaces UCA and fieldbus. In this study, PROFIBUS and FOUNDATION Fieldbus are selected as candidate fieldbus protocols. Protocol interface in the gateway can be accomplished by mapping objects and services of UCA and fieldbus. MOst of the UCAs CASM objects and services are directly mapped into those of the application and user layers of fieldbus. However, some CASM services are not supported in the application and user layers of fieldbus. This study presents the method of implementing those services. In order to show that the implementation of interface is possible, this study presents pseudo-codes of interface program that maps the objects and services of UCA and fieldbus.

• 한국조경학회지
• /
• 제25권4호
• /
• pp.171-183
• /
• 1998

The purpose of this study was to analyze urban greenspace area and vegetation structure by land use types for both Chuncheon and Kangleung. Natural and agricultural lands were predominant in the study cites, as 75-80% of total area. Residential lands accounted for about 10%, and commercial and industrial lands(including transportation), 5-10%. Only 10-20% of urban residential and commercial area was covered with greenspace. Woody plant cover was 12-13%, and tree density was 1.5 trees/100$m^2$ for urban lands(all land use types except natural land) in both cities. The tree-age structure was largely characterized by young, growing tree population, and species diversity within a diameter class decreases as the diameter classes get larger. Urban lands of both cities had quite a similar species composition of woody plants (similarity index of 0.65). Street trees in Chuncheon were intensively pruned annually to protect the above ground utility lines. Some strategies were explored to solve problems found in the existing greenspace structures. They included increase of biomass and greenspace area through minimization of unnecessary impervious surfaces, creation of multilayered and multiaged vegetation structures, relocation of above ground utility lines and avoidance of intensive tree pruning, and establishment of greenspace proximity and connectivity.

• 한국압력기기공학회 논문집
• /
• 제16권1호
• /
• pp.117-124
• /
• 2020

3D printing is a technology that has significantly grown in recent years, particularly in the aerospace, defense, and medical sectors where it offers significant potential cost savings and reduction of the supply chain by allowing parts to be manufactured on-site rather than at a distance supplier. In nuclear industry, 3D printing technology should be applied according to the manufacturing trend change. For the application of 3D printing technology to the nuclear power plant, several problems, including the absence of code & standards of materials, processes and testing & inspection methods etc, should be solved. Preemptively, the improvement of reliability of 3D printing technology, including mechanical properties, structural performance, service performance and aging degradation of 3D printed parts should be supported. These results can be achieved by collaboration of many organizations such as institute, 3D printer manufacturer, metal powder supplier, nuclear part manufacturer, standard developing organization, and nuclear utility.