• Proceedings of the KIPE Conference
• /
• 2005.07a
• /
• pp.149-151
• /
• 2005

Recently, power supply-demand instability due to the dramatic increase in power usage suchas air-conditioning load at summertime has brought forecasts of decrease in power supply capability. Therefore improving the load factor through systematic load management, in other words, Direct Load Control became necessary. Direct Load Control(DLC) system is kind of a load management program for stabilization of electric power supply-demand. It's purpose is limiting the demand of the demand side selected at peak load or other time periods. The paper presented a Design of Direct Load Controller for control the amount of power demand in demand side. The proposed Controller is cheaper and has ability of storing more power data than pre-existing device.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.51 no.4
• /
• pp.219-221
• /
• 2002

This paper presents an electric scooter development using blushless DC motor. In recent scooters was to develop for sport leisure and short transportation. Most of scooter are used petroleum gas. This gas scooter has disadvantage to pollute the air. Some of scooters have developed by DC motor which require a brush. However brushless motors have higher maximum speed and greater capacity, save maintenance labour and produce less noise. There is also greater freedom in planing the usage of brushless motors. In this paper we develop an electric scooter driving BLDC motor for design smart system and control speed of scooter with current reference signal to apply voltage to motor by means of three phase inverter. Using accelerator device we generate current reference to control speed and send the current to a MICOM by A/D converter. This MICOM produces the voltage signal and hall sensors signal and PWM controller drive three phase inverter to minimize error between the reference and an actual current.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.48 no.5
• /
• pp.601-606
• /
• 1999

A Walsh function method is proposed in this report for the analysis and optimal control of linear time-delay systems, which is based on the Picard's iterative approximation and fast Walsh transformation. In this research, the following results are obtained: 1) The differential and integral equation can be solved by transforming into a simple algebraic equation as it was possible with the usual orthogonal function method: 2) General orthogonal function methods require usage of Walsh operational matrices for delay or advance and many calculations of inverse matrices, which are not necessary in this method. Thus, the control problems of linear time-delay systems can be solved much faster and readily.

• Proceedings of the KIEE Conference
• /
• summer
• /
• pp.1260-1262
• /
• 2004

Direct Load Control(DLC) system is a load management program for stablization of electric power supply-demand. It is a series of acts limiting the demand of selected demand side at peak load or other time periods. Recently, power supply-demand instability due to dramatic increase in power usage such as summertime air-conditioning load has brought forecasts of decrease in power supply capability. Therefore heightening the load factor through systematic load management, in other words, Direct Load Control became necessary. By examining the composition and operation of the DLC system, this paper provides conceptional understanding of the DLC system and help in system research.

• Journal of the Korean Society of Mechanical Technology
• /
• v.13 no.1
• /
• pp.57-64
• /
• 2011

Recently, all-electrified houses have constructed and some tasks are being carried out to monitor energy consumption patterns. The energy monitoring includes various elements such as temperature, pressure, water flow, $CO_2$, and electricity. In this monitoring, electricity consumption is one of the essential factors because the performance and energy saving levels are described by this physical quantity. This quantity depends on materials, structure, operation of the house, which operation means consumer's life style and usage patterns of home appliances furthermore. Firstly, this paper shows a control simulation method which were developed a few years ago. And some different methods are proposed considering flexible experimental condition.

• Journal of Information Processing Systems
• /
• v.15 no.2
• /
• pp.320-330
• /
• 2019

This study analyzed changes in sociality and democratic-citizenship among elementary school students in the information class and the science class at the Science Education Institute for the Gifted, who were divided into an experimental group and a control group. The experimental group engaged in the Learning Together (LT) cooperative form of learning for which the remix function of Scratch, an educational programming language, was applied, while the control group was given general instructor-led lessons. Members in the experimental group were able to modify processes during projects through the usage of the remix function, thereby actively participating in the projects and eventually generating team-based results. The post-class t-tests showed a greater degree of improvements in sociality and democratic citizenship for the experimental group that was offered the remix-function-based cooperative learning than the control group. Statistically significant differences were present between two groups particularly in "cooperative spirit" sub-domain of sociality and the "community" and "responsibility" sub-domains of democratic citizenship.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2009.05a
• /
• pp.211-214
• /
• 2009

This paper describes a location privacy control system. Also, we propose a model of location privacy control for national usage and system. This research is applicable to location privacy protection in commercial location-based services in wireless telecommunications, T-Money transtoration card system, GIS platform and provide system of variety service.

• The Journal of the Convergence on Culture Technology
• /
• v.7 no.2
• /
• pp.35-48
• /
• 2021

This study is an attempt to establish a model and identify the relationship between the individual characteristics of college students, Internet usage characteristics, exposure to pornography, and anti-social sexual perception. The subjects of the study were 360 college students aged 18 or older in B city, and the collected data were analyzed using the IBM SPSS 21.0 and AMOS 22.0 programs. The goodness-of-fit index of the modified model met the acceptance criteria (𝛘²/df=2.786, GFI=.95, AGFI=.92, SRMR=.06, RMSEA=.07, NFI=.89, CFI=.93, TLI=.90). According to the results of path analysis, the variables that directly affect anti-social sexual perceptions of college students were personal characteristics and exposure to pornography, and the variable with indirect effect was the Internet usage characteristics. The biggest direct effect on anti-social sexual perception was exposure to pornography, and it was confirmed that exposure to pornography was directly affected by personal characteristics and Internet usage characteristics. Therefore, in order to reduce anti-social sexual perceptions among college students, measures should be taken to control personal characteristics and Internet usage characteristics that directly affect the level of exposure to pornography.

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.1042-1047
• /
• 2004

Voltage control is an essential part of the electric energy transmission and distribution system to maintain proper voltage limit at the consumer's terminal. Besides the generating units that provide the basic voltage control, there are many additional voltage-controlling agents e.g., shunt capacitors, shunt reactors, static VAr compensators, regulating transformers mentioned in [1], [2]. The most popular one, among all those agents for controlling voltage levels at the distribution and transmission system, is the on-load tap changer transformer. It serves two functions-energy transformation in different voltage levels and the voltage control. Artificial Neural Network (ANN) has been realized as a convenient tool that can be used in controlling the on load tap changer in the distribution transformers. Usage of the ANN in this area needs suitable training and testing data for performance analysis before the practical application. This paper briefly describes a procedure of processing the data to train an Artificial Neural Network (ANN) to control the tap changer operating decision of parallel transformers for a closed primary bus. The data set are used to train a two layer ANN using three different neural net learning algorithms, namely, Standard Backpropagation [3], Bayesian Regularization [4] and Scaled Conjugate Gradient [5]. The experimental results are presented including performance analysis.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.10 no.1
• /
• pp.1-17
• /
• 2016

The separated management and operation of commercial IP/optical multilayer networks makes network operators look for a unified control plane (UCP) to reduce their capital and operational expenditure. Software-defined networking (SDN) provides a central control plane with a programmable mechanism, regarded as a promising UCP for future optical networks. The general control and scheduling mechanism in SDN-based optical burst switching (OBS) networks is insufficient so the controller has to process a large number of messages per second, resulting in low network resource utilization. In view of this, this paper presents the burst-flow scheduling mechanism (BFSM) with a proposed scheduling algorithm considering channel usage. The simulation results show that, compared with the general control and scheduling mechanism, BFSM provides higher resource utilization and controller performance for the SDN-based OBS network in terms of burst loss rate, the number of messages to which the controller responds, and the average latency of the controller to process a message.