• 제목/요약/키워드: Undulation

검색결과 106건 처리시간 0.025초

미세 요철표면의 마찰마멸특성에 관한 연구 (Study on the tribological Properties of Micro-undulated Surface)

  • 차금환;김대은
    • 한국윤활학회:학술대회논문집
    • /
    • 한국윤활학회 1999년도 제29회 춘계학술대회
    • /
    • pp.47-52
    • /
    • 1999
  • In recent years, the micro-tribological behavior of silicon has been the topic of much interest. peformance of thin film under light load is important for potential applications in MEMS. In this work under light load and various humidity, the tribological behavior of undulated surface with various width and shape was Investigated. The results show that undulated surface of linear type had good tribological properties abrasive wear occur depending on the sliding condition. Also the effect of humidity on friction and wear was not important if exist undulation. Finally, undulations on HDD were found to be effective in trapping wear particles.

  • PDF

음향탐지장비를 활용한 해저지형도작성에 관한 연구 (Drawing of Sea Mapping using Sound Detector)

  • 이재기;김명배;김감래
    • 한국측량학회지
    • /
    • 제25권6_2호
    • /
    • pp.625-633
    • /
    • 2007
  • 최근 인간생활의 영역이 해양에까지 영역을 넓이기 위해 해양조사가 이루어지고 있다. 이에 이 연구에서는 해저지형에 대해 음향탐지기를 이용하연 해저면의 물체나 지형의 기복을 파악하기 위한 지형도의 작성 가능성을 파악하였다. 그 결과 ISSS의 방법에 의해 음향영상이미지를 획득하였으며, 그 결과 해저면의 지형도 및 3-D모델링도를 작성할 수 있었다.

균질화기법을 이용한 WFC의 등가물성치 산출 (Computation of equivalent material properties of woven fabric composites using homogenization technique)

  • 장지현;윤민우;이진희
    • 대한기계학회논문집A
    • /
    • 제22권3호
    • /
    • pp.588-594
    • /
    • 1998
  • Reliable three-dimensional models of woven fabric composites had scarcely been proposed for their geometric complexity. Simplified models, mostly one- or two-dimensional, currently used are not considered effective enough because of their oversimplifications. In this paper, the equivalent thermal conductivities and elasticity properties of woven fabric composites are computed using homogenization technique. The computational results show that the strength and thermal conductivity linearly increase with fiber volume fraction and that the variations of undulation of fibers has little effect on equivalent material properties. Homogenization technique is proved useful in the study of woven fabric composites and may find a lot more applications in the area.

초음속 동축 제트의 구조에 미치는 외부노즐 분사각의 영향 (Effect of Outer Nozzle Ejection Angle on Jet Structure issuing from Supersonic Dual Coaxial Nozzle)

  • 백승철;권수영;주성열;권순범
    • 대한기계학회:학술대회논문집
    • /
    • 대한기계학회 2001년도 추계학술대회논문집B
    • /
    • pp.426-431
    • /
    • 2001
  • This paper experimentally investigates the characteristics of dual coaxial jet issuing from inner supersonic nozzle and four kinds of outer converging nozzle of 40, 50, $60^{\circ}$ and $70^{\circ}$ in outer ejection angle. The pressure ratio of the stagnation to the exit ambient pressures in the inner supersonic nozzle of constant expansion rate is 7.5, which is corresponded to the condition of a slightly underexpanded, and that of outer nozzle is 4.0. Flow visualizations by using of shadowgraph method, impact pressure and centerline static pressure measurements are presented. It is found that the jet structure is changed significantly by the variation of outer nozzle ejection angle. Impact pressure level is lower and undulation of static pressure is higher, as the injection angle of outer jet increases.

  • PDF

백천사 청동 대야의 울림 특성에 관한 연구 (A Resonance Characteristic of bronze washbasin)

  • 이은영;안익수;배명진
    • 한국컴퓨터정보학회:학술대회논문집
    • /
    • 한국컴퓨터정보학회 2017년도 제55차 동계학술대회논문집 25권1호
    • /
    • pp.201-202
    • /
    • 2017
  • 공명은 외부에서 진동계를 진동시킬 수 있는 힘을 가했을 때 그 고유진동수와 외부에서 가해주는 힘의 진동수가 같으면 그 진동은 심해지고 진폭도 커진다. 진동체가 서로 연결되어 있는 경우, 양쪽 진동수가 같으면 공명에 의해 에너지를 서로 교환하는 현상이다. 본 논문에서는 경남 사천에 소재하는 백천사의 사찰 마당에 있는 청동 대야를 사람이 손잡이를 문지를 때 발생하는 파동 현상을 고찰한 연구이다. 청동 대야에서 발생하는 진동수는 3가지 성분이다. 이 음은 복합음의 일종으로 볼 수 있다. 복합음의 기본 특성은 기본음이 배음보다 음압이 크다. 철제에서 생성되는 음압의 형태와 단조로운 순음인 경우가 많다. 청동 대야의 음압은 맥놀이 특성을 나타내고 있어 진폭변조의 포락선을 형성하고 있다.

  • PDF

생체 모방익 추진에 대한 수치적 연구 (Numerical Study of Biomimetic Foil Propulsion)

  • 한철희;이학진;조진수
    • 대한기계학회논문집B
    • /
    • 제30권9호
    • /
    • pp.866-872
    • /
    • 2006
  • A numerical study on the propulsive characteristics of a biomimetic foil is done by developing an unsteady linearly-varying strength vortex method. A biomimetic foil is represented as a deforming foil with a tail fin. Present method is verified by comparing the simulated results with results using finite element and finite volume methods. A new boundary condition is imposed by considering the relative rotational velocity, which has not been included in the previous published literature. It is found that the undulation amplitude increases the thrust while maximum thickness is stepping down the thrust. It is also shown that there exists an optimal frequency for maximum thrust generation. It is believed that present results can be used in the investigation of the propulsive characteristics of the biomimetic deforming foil.

OSU89B에 의한 한반도 일원의 지오이드에 대한 연구 (A Study on the Geoid in and around the Korean Peninsula by analysing OSU89B)

  • 최광선
    • 한국측량학회지
    • /
    • 제9권2호
    • /
    • pp.67-72
    • /
    • 1991
  • OSU89B를 이용하여 한반도 일원의 지오이드와 수직선편차에 대하여 연구하였다. 한반도 일원에서 지오이드는 GRS1980 지구타원체에 비해 +3m~+35m 범위의 변화를 나타내며, 전반적으로 서에서 동으로 높아져 감이 특징적이다. 수직선편차는 $\xi$가 -8.9"~8.0", $\eta$가 -13.1"~9.0"의 범위의 변화를 보이며 전반적으로 서편경향이 특징적이다.며 전반적으로 서편경향이 특징적이다.

  • PDF

The Altimeter Geoid of the Region of Korean peninsula

  • Yun, Hong-Sic
    • 한국측량학회지
    • /
    • 제13권1호
    • /
    • pp.61-68
    • /
    • 1995
  • 한반도 주변의 해상고도데이타를 이용한 지오이드면을 결정하였다. 사용된 해상위성 데이타는 Geosat, ERS-1 및 Topex/Poseidon으로부터 계산된 고도데이타이며, 각각의 위성으로부터 계산된 데이터를 Cross-Over 조정방법에 의하여 조정하였다. 조정계산결과 해면고도는 RMS 10 cm 이하로 해상지오이드면으로 채택할 수 있음을 알 수 있었다. 그러나 한반도 주변 해상에서의 지구물리학적인 특성을 연구하기 위하여는 보다 광범위한 연구와 계속적인 데이타의 수집이 필요하다.

  • PDF

타이어의 비선형성 보장을 위한 노면 형상의 재구성 (Regeneration of Road Profile to Compensate Nonlinearties of Tires)

  • 김명규;김광석;유완석
    • 한국자동차공학회논문집
    • /
    • 제7권8호
    • /
    • pp.199-207
    • /
    • 1999
  • For the stress and vibration analysis of vehicle component by computer simulation, it is necessary to find the forces acting on the vehicle components due to the road profile undulation. A precise modeling of tires is not easy due to nonlinear effects between tire-ground. In this study, a new method is proposed to regenerate road profiles that preserves the same PSD of wheel with a linear tire model. Using the frequency response function between road-wheel , the digital signal processing method, and DADS program , road profile is regenerated from the computer simulation.

  • PDF

경사지 전원주택의 평면유형에 관한 연구 (A Study on Floor Type of Sloped Sub-urban Housing)

  • 이종협
    • 한국실내디자인학회:학술대회논문집
    • /
    • 한국실내디자인학회 2004년도 추계학술발표대회 논문집
    • /
    • pp.191-192
    • /
    • 2004
  • This is on-going project planned from June to August, 2003 for the development of sub-urban housing of 108 buildings on 30,000 pyung lot located in Dochuk-myun, Kwangju-si, Kyunggi-do. The Site is consist of 10 different building sizes ranging from 45pyung to 65pyung on 180 to 220pyung lot. Buyers can customize their types and functions based on given sizes. Most sub-urban housing until now was based on typical planning and had no regard for its characteristics of diverse location. To solve these problems, I designed each types according to its locational characteristics and gave each lot flexible shape to have identities. To take advantage of its undulation, I put playground and sports facilities like swimming pool and tennis court at the approach. Central square to the center and park and observatory to the top

  • PDF