• 한국환경복원기술학회지
• /
• 제8권3호
• /
• pp.33-42
• /
• 2005

The bearing methods using pile of steel itself or reinforced concrete has been applying which in excavated depth was not deep. Also, the retaining wall as resisting structure to lateral force has taken weakness that the cure periods of concreted is long. Recently, with the material cost of steel, the application of cement is more increasing trend. In this study, the design methods of earth retaining and retention wall within the pre-casted concrete pile, PHC(Pretentioned spun High strength Concrete piles), was proposed which in the ground condition of excavated depth was not deep. The typical ground conditions, cohesive and non-cohesive soil, was considered as follows; soil strength as internal friction angle and UU(Undrained Unconsolidation triaxial test) strength, soil reaction and stabilization of structures. The application of design methods could be confirmed through the comparing and analyzing between measured data and utility software for the design.

• 한국지반공학회지:지반
• /
• 제4권3호
• /
• pp.43-52
• /
• 1988

반복하중을 받는 정토의 거동은 단일하중에 의한 결과와 매우 상리하게 나타나며, 그중에서도 특히 간극수려의 거동은 상당히 중요하다. 본 연구는 반복하중 하에서의 점토에 대한 응력-변형 특성을 규명하기 위한 실험적 연구로서 하 중을 가하는 동안에 발생하는 간극수려에 대하여도 언급하였다. 시료는 삼축용기 안에서 24시간동안 등방려밀시켰으며, 삼축시험은 비배수상태 하에서 재성형된 시료에 때하여 압축파괴, 파괴반복, 비파괴 평형시험을 변형제어방법으로 수행하였다. 이에 따라 어느 특정한 시료의 거동을 뚜렷하게 서로 다른 두가지 양상으로 구분하는 반복응력의 한계치가 존재 함을 확인할 수 있었다.

• 한국농공학회논문집
• /
• 제55권5호
• /
• pp.9-16
• /
• 2013

This study finds the characteristics of long-term settlement of Bottom Ash and to review the application of Singh-Mitchell creep equation and Burgers Model to the creep behavior of Bottom Ash. In the undrained state, it was confirmed that creep behavior appeared in the range to 30-80 % of the maximum deviator stress by applying condition in other three stresses through triaxial compression test after isotropically consolidation. By using sieve analysis, it was compared to each sample that was passed through 9.5 mm, 2 mm, 0.25 mm sieves. Also, using Singh-Mitchell creep equation and Burgers Model, it was compared between the theoretical behavior and the observed behavior for each sample. In the result, it is found that creep behavior of Bottom Ash is similar to the theoretical behavior of Singh-Mitchell creep equation and Burgers Model in early stage and it is possible to predict creep behavior of Bottom Ash by these models.

• 한국지반공학회지:지반
• /
• 제12권4호
• /
• pp.101-114
• /
• 1996

본 연구는 중간토의 지지력 및 변형특성을 조사하기 위해 원심재하장치(centrifuge)를 이용한 지지력 실험을 시행한 결과이다. 점성토에 비해 투수계수가 비교적 큰 중간토지 반을 대상으로 재하 과정에서 발생하는 배수현상이 지반의 지지력에 미치는 영향을 조사하였다. 그 결과, 재하 속도와 지반의 투수계수와의 관계, 즉 본 연구에서 정의한 상대재하속도와 하중강도의 관계로부터 기존 설계상의 문제점을 지적하였고, 또한 재하속도의 차이에 의해 동일 침하량비에서의 하중강도의 대소관계가 역전하는 현상은 비 배수상태의 재하속도 의존성 뿐만 아니라 재하초기부터 발생하는 부분배수현상에 의한 것임을 재하중에 관측한 과잉간극수압의 거동과 변형거동을 중심으로 증명하였다. 나아가 중간토지반에 있어서 기초폭과 초기 지반응력 상태가 지지력에 미치는 영향을 조사하기 위하여 기초폭과 과압밀비를 변화시켜 중간토지반의 지지력 특성을 조사 하였다.

• 한국지반공학회지:지반
• /
• 제10권3호
• /
• pp.17-32
• /
• 1994

역재하시에 나타나는 흙의 비등방거동을 모델하기 위하여, 본 연구에서는 일반 등방경화규칙에 근거한 비등방 경화이론을 개발하였다. 일반 등방규칙은 등방경화의 기준이 되는 중심응력텐서가 임의의 응력상태에서 존재할 수 있도록 허용하므로, 역재하과정에서 발생하는 소성변형을 예측할 수가 있다. 제안된 구성모델은 단순한 경화함수만을 이용하여 수식화되었고, 일반등방경 화규칙에 적용된 개념을 기존의 비등방경화규칙과 비교하여 서술하였다. 검증을 위하여, 배수 및 비배수조건, 과압밀상태, Ko 압밀등의 초기조건이 상이한 점토에 대하여 관측된 삼축압축시료의 거동을 예측하였다.

• Geomechanics and Engineering
• /
• 제10권5호
• /
• pp.577-598
• /
• 2016

This paper presents a numerical study of pile force distribution in a pile group foundation subjected to vertical load and large moment. The physical modeling of a pile foundation for a wind turbine is analyzed using 3D finite element software, PLAXIS 3D. The soil profile consists of several clay layers, which are modeled as Mohr-Coulomb material in an undrained condition. The piles in the pile group foundation are modeled as special elements called embedded pile elements. To model the problem of a pile group foundation, a small gap is created between the pile cap and underlying soil. The pile cap is modeled as a rigid plate element connected to each pile by a hinge. As a result, applied vertical load and large moment are transferred only to piles without any load sharing to underlying soil. Results of the study focus on pile load distribution for the square shape of a pile group foundation. Mathematical expression is proposed to describe pile force distribution for the cases of vertical load and large moment and purely vertical load.

• Geomechanics and Engineering
• /
• 제9권5호
• /
• pp.585-599
• /
• 2015

Laboratory model tests were conducted to investigate the effect of surcharge loading rate on the magnitude of lateral displacement of prefabricated vertical drains (PVDs) improved deposit. The test results indicate that under the condition that the system had sufficient factor of safety (FS) ($FS{\geq}1.2$), for the similar model ground under the same total applied surcharge load, the lateral displacement increases with the increase of loading rate. The test results have been used to check the validity of a previously proposed method for predicting the maximum lateral displacement, and it shows that the data points are around the middle line of the predicted range, which supports the usefulness of the proposed method. The basic idea of the prediction method is an empirical relationship between the normalized lateral displacement (NLD) and a ration of load to the undrained shear strength of the deposit (RLS). The model test results offer some modifications of the NLD-RLS relationship: (1) instead of a bilinear relationship, NLD-RLS relationship may be entirely nonlinear; (2) the upper bound value of RLS for the proposed method can be used may be limited to 2.1 instead of the originally proposed value of 3.0.

• Geomechanics and Engineering
• /
• 제18권3호
• /
• pp.225-234
• /
• 2019

A numerical stepwise approach for cavity expansion problem in strain-softening rock or soil mass is investigated, which is compatible with Mohr-Coulomb and generalized Hoek-Brown failure criteria. Based on finite difference method, plastic region is divided into a finite number of concentric rings whose thicknesses are determined internally to satisfy the equilibrium and compatibility equations, the material parameters of the rock or soil mass are assumed to be the same in each ring. For the strain-softening behavior, the strength parameters are assumed to be a linear function of deviatoric plastic strain (${\gamma}p^*$) for each ring. Increments of stress and strain for each ring are calculated with the finite difference method. Assumptions of large-strain for soil mass and small-strain for rock mass are adopted, respectively. A new numerical stepwise approach for limited pressure and plastic radius are obtained. Comparisons are conducted to validate the correctness of the proposed approach with Vesic's solution (1972). The results show that the perfectly elasto-plastic model may underestimate the displacement and stresses in cavity expansion than strain-softening coefficient considered. The results of limit expansion pressure based on the generalised H-B failure criterion are less than those obtained based on the M-C failure criterion.

• 자연, 터널 그리고 지하공간
• /
• 제21권2호
• /
• pp.103-116
• /
• 2019

Permanent sprayed concrete tunnel linings waterproofed with bonded membranes have been used at a number of important traffic projects over the last decade. Research has been carried out in several teams in order to increase the understanding of the function, properties and behavior of such linings under different loading and boundary conditions. The basic layout of this lining gives fundamental different system properties compared to the traditional lining systems. The main differences pertain to the groundwater exposure and the resulting hydraulic loading, the response of the concrete and membrane materials to this loading, as well as the geomechanically induced loading of the lining structure. The current understanding of the function and properties of such lining structures is presented in the paper based on review of recent research carried out in Norway, as well as field observations and monitoring carried over a several years. The influence of the water exposure on the final condition of the concrete and membrane materials has proven to be of vital importance for proper material testing and acceptance, assessments of the mechanical contribution of the bonded membrane, as well as assessments of the longterm durability of such linings. Obtaining realistic material parameters for the concrete and membrane materials subject to the boundary conditions posed by the groundwater exposure in an undrained structure is emphasized. Finally, some recent results from currently ongoing research on such linings, particularly the hydraulic response of the rock mass and the long term behavior of the concrete and membrane materials are presented.

• Geomechanics and Engineering
• /
• 제34권5호
• /
• pp.473-480
• /
• 2023

Acid rain of soils has a significant impact on mechanical properties. An X-ray diffraction test, scanning electron microscope (SEM) test, laser particle size analysis test, and triaxial unconsolidated undrained (UU) test were carried out in red clay soils with different compaction degrees under the effect of different concentrations of acid. The experiments demonstrated that: the dissolution effect of acid rain on colluvium weakened with the increase in the compacting degree under the condition of certain pH values, i.e., the damage to the structure of red clay soil was relatively light, where the number of newly increased pores in the soil decreased and the agglomeration of soil particles increased; for the same compacting degree, the structural gap decreased, and the agglomeration increased with the increase in the pH value (acidity decreases) of the acid rain; the dissolution rate of Si, Al, Fe, and other elemental minerals and cement in red clay soil was found to be higher under the effect of acid rain, in turn destroying the original structure of the soil body and producing a large number of pores. This is macroscopically expressed as the decrease of the soil cohesion and internal friction angle, thereby reducing the shear strength of the soil body.