• 산업기술연구
• /
• 제18권
• /
• pp.125-130
• /
• 1998

The undergound space is widely developed because of dometic industry and protection of enviornment. The existence and exact location of tunnel is very important for stability of the enormous underground storage house or building. Various types of prospecting methods have been applied to detection of underground tunnel. In this study, electrical prospecting method is applied to detect tunnel because the development of underground space is very connected with groundwater. Sensitivity analysis is introduced for the calculation of elctrical inversion data. The governing equation is Fourier transformed into the 2-dimensional wave number space and solved by using the finite element method.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2002년도 봄 학술발표회 논문집
• /
• pp.665-672
• /
• 2002

In this paper, the utilization of waste foundry sand produced in the molding process is studied as a backfill material for underground electric utility systems such as concrete box structures and pipe lines for power supply. The physical, chemical and thermal properties for waste foundry sand are investigated for mechanical stability, environmental hazard and power transmission capacity. Also its properties are compared with the natural river sand. The test results show that waste foundry sand can be utilized for underground concrete box structures as a backfill material; however, it can not be applied to underground pipe lines due to high thermal resistivity or low power transmission capacity.

• 한국지반공학회지:지반
• /
• 제26권9호
• /
• pp.33-47
• /
• 2010

Underground constructions continue to provide challenges to Geotechnical Engineers yet they pose the best opportunities for development and deployment of advance technologies for analysis, design and construction. The reason for this is that, by virtue of the nature of underground constructions, more data and information on ground characteristics and response become available as the construction progresses. However, due to several barriers, these data and information are rarely, if ever, utilized to modify and improve project design and construction during the construction stage. To enable the use of evolving realtime data and information, and adaptively modify and improve design and construction, the paper presents an analysis and design system, called AMADEUS, for underground projects. AMADEUS stands for Adaptive, real-time and geologic Mapping, Analysis and Design of Underground Space. AMADEUS relies on recent advances in IT (Information Technology), particularly in digital imaging, data management, visualization and computation to significantly improve analysis, design and construction of underground projects. Using IT and remote sensors, real-time data on geology and excavation response are gathered during the construction using non-intrusive techniques which do not require expensive and time-consuming monitoring. The real-time data are then used to update geological and geomechanical models of the excavation, and to determine the optimal, construction sequences and stages, and structural support. Virtual environment (VE) systems are employed to allow virtual walk-throughs inside an excavation, observe geologic conditions, perform virtual construction operations, and investigate stability of the excavation via computer simulation to steer the next stages of construction.

• 한국터널지하공간학회 논문집
• /
• 제17권4호
• /
• pp.499-511
• /
• 2015

주방식 지하구조물은 여러 개의 갱도 굴착에 의해 형성되는 격자 형태의 구조물이므로, 갱도들의 굴착순서에 따라 주방식 지하구조물의 시공성과 경제성이 좌우될 수 있다. 따라서 본 연구에서는 주방식 지하구조물의 지반조건, 굴착순서 등의 다양한 설계조건들을 고려하여 주방식 공법의 굴착공정을 검토하였다. 굴착공법으로는 발파공법을 가정하였으며, 가로 세로 병행 시공방식과 가로 세로 순차시공방식으로 구분하여 굴착공정을 검토하였다. 굴착순서에 따른 주방식 지하구조물의 안정성과 더불어 굴진면의 개수, 점보드릴의 이동거리 등에 따른 시공성을 분석한 결과, 구조적 안정성에는 큰 차이가 없으나 굴진면 운영 개소와 점보드릴의 이동거리 측면에서 가로 세로 병행 시공방법의 시공성이 상대적으로 유리한 것으로 나타났다.

• 한국터널지하공간학회 논문집
• /
• 제11권2호
• /
• pp.175-188
• /
• 2009

도심지 등 지역적인 여전에 의하여 기존의 지하 공동 또는 터널에 근접하여 발파를 이용한 새로운 터널을 굴착할 경우, 새로운 터널의 굴착으로 인하여 지반이 이완되고 따라서 기존 지하 공동의 안정성에 문제가 발생할 수 있다. 이러한 가존 지하 공동의 안정성에 문제를 발생시킬 수 있는 가장 큰 요소로는 기존 지하 공동과 신설 터널의 이격거리가 될 수 또한 신설 터널 굴착으로 인한 소성영역의 발생에 따른 지반 이완을 문제 심을 수 있다. 따라서 본 연구에서는 기존 광역 상수관과 신설 터널의 이격거리에 따른 기존 광역 상수관의 안정성을 평가하기 위하여 이격거라가 다른 여섯 가지 모델에 대해 석고를 이용힌 2차원 축소 모형실험을 실시하였다. 실험 결과는 터널 굴착과정과 파괴 단계에서 발생된 변위 벡터와 균열양상으로 표현하였다. 터널 굴착과정 중 발생하는 변위를 분석하면, 터널과 광역 상수관의 간격이 상수관 직경의 2.5배 (2.5D)까지는 이격거리가 증가함에 따라 감소하는 경향을 보인다. 그러나 중심 간격이 2.5D를 넘으면 추가변위는 발생하지 않았다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2005년도 춘계 학술발표회 논문집
• /
• pp.409-416
• /
• 2005

Design analysis for underground spaces requires evaluating stability related to tunnel collapses. A failure mode is one of the critical factors in the conventional methods of stability analysis. Therefore identification of failure modes is essential in securing safe construction in the phase of design analysis, instrumentation planning and implementation of reinforcing measures. In this study failure modes at the tunnel heading in granular soils are investigated using physical model tests and numerical simulation for various tunnel depths and ground surface inclinations. Test results indicated that the effect of depth and inclination of ground surface on a failure mode are significant. It is identified that, with an incase in depth, failure modes become localized in a region close to the tunnel. It is also known that an increase in the inclination of ground surface results in inclined and wide failure modes.

• 한국터널지하공간학회 논문집
• /
• 제3권1호
• /
• pp.37-50
• /
• 2001

최근 터널구조물에서 결함이나 변상이 많이 발생하고 있지만 터널구조물의 특수성으로 인하여 그 원인을 평가하거나, 상태 및 안전성 평가에 있어 많은 어려움을 겪고 있다. 따라서 보다 효율적인 안전진단 및 유지관리대책이 요구되고 있다. 본 연구에서는 터널에서의 정밀안전진단을 효과적으로 수행하기 위하여 터널 라이닝과 주변지반에 대한 비파괴 조사기술, 터널 라이닝의 구조적 안정성을 평가할 수 있는 해석기술, 그리고 터널의 변상원인 및 건전도를 판단할 수 있는 평가기술을 개발하여 터널의 열화 및 손상정도를 진단하고 터널의 유지관리를 위한 적절한 보수 보강대책을 제시함으로서 체계적인 터널 안전진단업무에 활용하도록 하였다.

• 한국소음진동공학회논문집
• /
• 제16권1호
• /
• pp.19-26
• /
• 2006

The test blasts were carried out by detonating some single blastholes at two upper sites of the underground storage cavern for the crude oil. One was performed at the entrance site of the construction tunnel and the other at the middle area of the underground storage cavern. Based on the blast-induced nitration measured by the test blasts, we suggested the propagation equations of blasting vibration that were capable of estimating the peak particle velocity. In addition, in order to assess the stability of the adjacent ground storage tank, we did the frequency analysis and the response spectrum analysis with the particle velocity-time history and the particle acceleration-time history that were measured by the test blast carried out on the entrance site of the construction tunnel. In result, it was predicted that the displacement on the highest part of the tank shell was less than the allowable displacement.

• International Journal of Railway
• /
• 제9권1호
• /
• pp.21-26
• /
• 2016

When excavation under existing structure is planned for a new construction project, the underpinning method is one of the most applicable construction methods. This study introduces a new modified underpinning method which is applied to construct a new subway line in Seoul Metropolitan. The new subway line was designed to pass underneath the existing subway line. Existing subway line carries about 2 million passengers daily, which is 33% of total passengers using subway in Seoul, and is the only circulation line in Seoul. Subway trains are passing 540 times through this section in a day. By applying a new underpinning method, the subway box structure of line is exposed 54m in the air supported by bearing piles. The proposed method was carefully monitored using heavy instrumentation system during construction. This study proposed and verified the application of the modified underpinning method, which can reduce construction period by 1.5 times and the construction cost by 1.2 times comparing with conventional method. The importance of considering construction sequence is investigated and verified by analyzed data non-considering construction sequence. The unexpected heaving which can bring up a dangerous situation for train running stability were measured, so this study shows that the upward movement has to be analyzed in designing process. As the use of underground space increases, the proposed method can be a good example of underground development.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2005년도 추계학술대회논문집
• /
• pp.479-484
• /
• 2005

The test blasts were carried out by detonating some single blastholes at two upper sites of the underground storage cavern the crude oil. One was performed at the entrance site of the construction tunnel and the other at the middle part of the underground storage cavern. Based on the blast-induced vibration measured by the test blasts, we suggested the propagation equations of blasting vibration that were capable of estimating the peak particle velocity. In addition, in order to assess the stability of the nearest ground storage tank, we did the frequency analysis and the response spectrum analysis with the particle velocity-time history and the particle acceleration-time history that were measured by the test blast carried out on the entrance site of the construction tunnel. In result, it was predicted that the displacement on the highest part of the tank shell was less than the allowable displacement.