• 한국인터넷방송통신학회논문지
• /
• 제12권4호
• /
• pp.181-188
• /
• 2012

본 논문에서는 한방 의료의 설진에서 진단 지표로 활용될 수 있는 효과적인 설태 영역 추출 방법을 제안한다. 제안한 방법은 설태의 자외선 광원에 의한 형광 반응 특성을 이용하여 기존의 설태 추출 방법의 단점으로 지적되었던 진료 환경의 제약성 및 진료 결과의 객관성 부족에 대한 문제점을 해결할 수 있다. 처리 과정으로는 자외선 광원을 사용하여 설진 영상을 획득하고, 설질(Tongue body)과 설태(Tongue coating) 영역의 색차 크기에 상응하는 히스토그램(Histogram) 상의 골-포인트(Valley-points)를 임계 처리하여 이진화(Binarization)를 수행한다. 최종적으로 설진을 위하여 한의사에게 제공되는 진단 영상은 이진 영상에 케니-에지(Canny-Edge) 알고리즘을 사용하여 설태 윤곽 정보를 추출한 후에 환자의 원 혀 영상에 부과하여 제시한다. 제안한 방법의 성능 평가를 위해서는 다양한 혀 영상을 수집하고, 한의사가 수작업으로 설정한 설태 영역을 참영상(True image)으로 하여 제안한 방법으로 추출한 설태 영역과 비교하였다. 그 결과 제안한 방법은 87.87%의 추출률을 나타냈으며, 추출된 설태 영역의 형태 유사도도 높게 나타났다.

• 한국정보통신학회논문지
• /
• 제8권4호
• /
• pp.946-949
• /
• 2004

분포궤환 색소레이저(DFDL： Distributed feedback Dye Laser)로부터 80 uJ의 단일 극초단 펄스를 얻고, 이를 2단의 증폭기와 betune cell에 의한 다단 증폭으로 높은 출력을 얻은 후 BBO를 사용, 자외선 영역의 제 2고조파를 얻었다.

• International journal of advanced smart convergence
• /
• 제8권3호
• /
• pp.27-38
• /
• 2019

I reviewed about dyeing fastness and functional properties of the non-mordant dyed cotton and iron mordant dyed cotton with astringent persimmon juice. In the UV-VIS spectrum of astringent persimmon juice, the maximum absorption wavelength of the juice was 272.0 nm, which was a characteristic peak of tannin. In dyeing fastness, light fastness of the non-mordant dyed cotton was a little low at grade 2~3. But by the iron mordant treatment, the light fastness was good at grade 4. Dry cleaning fastness to discoloration and contamination was excellent at grade 4~5 for both the non-mordant dyed cotton and iron-mordant dyed cotton. Their rub fastness were grade 3 and grade 2~3 respectively, in the dry condition, and grade 2~3 and grade 3 respectively, in the wet condition. In the perspiration fastness of the non-mordant dyed cotton, the discoloration from acidity and alkalinity was grade 3~4 and grade 3, respectively, and contamination from acidity and alkalinity was relatively good at grade 4. Meanwhile, in the perspiration fastness of the non-mordant dyed cotton, discoloration from acidity and alkalinity was fair, both recording grade 3~4, and contamination from acidity and alkalinity was very good, both recording grade 4~5. In the ultraviolet protection effect of the non-mordant dyed cotton and iron-mordant dyed cotton, the ultraviolet protection factor was both 50+, both of which showed an excellent ultraviolet blocking effect. And the protection rate of UV-A appeared 98.4% and 99.1%, respectively, and the protection rate of UV-B showed 98.7% and 99.2, respectively. In addition, both exhibited an excellent deodorization rate over 99.9% or more, irrespective of the passage of time. Also, both showed an excellent antimicrobial activity over 99.9% or more against Staphylococcus aureus and Klebsiella pneumoniae.

• 한국전기전자재료학회논문지
• /
• 제30권8호
• /
• pp.508-513
• /
• 2017

Ultraviolet (UV) photodetectors are used in various industries and fields of research, including optical communication, flame sensing, missile plume detection, astronomical studies, biological sensors, and environmental research. However, general UV detectors that employ Schottky junction diodes and p-n junctions have high fabrication cost and low quantum efficiency. In this study, we investigated the characteristics of materials used to manufacture UV photodetectors in a low-cost solution process that requires easy fabrication of flexible substrates. We fabricated p-type NiO and n-type ZnO substrates with wide band gap by the sol-gel method and compared the characteristics of substrates prepared under different spin-coating and heat-treatment conditions.

• 한국정보전자통신기술학회논문지
• /
• 제2권1호
• /
• pp.3-9
• /
• 2009

AMOLED 디스플레이는 LCD에 비해 넓은 시야각, 빠른 응답 속도, 박막화의 용이성 등의 많은 장점들을 갖고 있으나 불균일한 TFT의 전기적 특성과 전원선의 전압 강하에 의한 휘도 불균일, 잔상 현상 및 수명 등과 같은 많은 문제점들이 있다. 이 중에서 본 논문에서는 구동 TFT 소자의 hysteresis 현상에 의해 발생하는 가역적 잔상 현상을 개선하고자 한다. TFT의 hysteresis 특성을 개선하기 위해 게이트 산화막 증착 전에 표면 처리 조건을 변경하였다. 게이트 산화막 증착 전에 실시한 자외선 및 수소 플라즈마 표면 처리는 게이트 산화막과 다결정 실리콘 박막 사이의 계면 trap 밀도를 $3.11{\times}10^{11}cm^{-2}$로 감소시켰고, hysteresis 레벨을 0.23 V로 줄였으며 출력 전류 변화율을 3.65 %로 감소시켰다. 자외선 및 수소 플라즈마 처리를 행함으로써 AMOLED 디스플레이의 가역적 잔상을 많이 개선할 수 있을 것으로 기대된다.

• 한국정보전자통신기술학회논문지
• /
• 제16권2호
• /
• pp.109-115
• /
• 2023

본 논문은 UV(ultraviolet) 처리된 자기 조립 단분자막(fluorinated self-assembled monolayers; FSAM)을 배향막으로 사용한 액정의 배향 특성을 분석하였다. 물리화학적 분석을 사용하여 UV 처리 전후의 ITO(indium-tin-oxide) 유리 기판의 FSAM 특성을 확인하였다. FSAM 표면은 UV 처리에 의해 소수성에서 친수성으로 변화하였다. LC(liquid crystal) 분자는 UV 처리된 FSAM 표면에서 수평방향으로 정렬되었고 선경사각도 90°에서 0°로 변화하였다. UV 처리된 FSAM을 배향막으로 사용하여 제작된 TN(twist nematic) 셀의 전기광학(electro optics; EO) 특성은 기존의 PI(polyimide) 배향막에 비해 응답 시간이 빠른 것을 확인하였다. 이는 UV 처리된 FSAM 이 LCD(liquid crystal display)의 기존 폴리이미드 배향막을 대체할 잠재적인 가능성을 가진다.

• 한국인쇄학회지
• /
• 제16권3호
• /
• pp.29-41
• /
• 1998

The ultraviolet(UV)-curable materials wildly have been used as a ink and coating materials. A according to measure UV polymerization phase separation of acryl groups 2,3,4-functional monomer, a few experiments were performed gel fraction, dynamic viscosity of alkyd resin blend system. Dependence of photoiniator concentration and various monomer, alkyd resin content investigated structural changes of films cured by UV irradiation. Curing rate measured UV irradiation under $25^{\circ}C$, cell gap 7cm and film thickness 100${\mu}{\textrm}{m}$. In results, it was through that the viscoelastic properties of films cured with increasing the ratios of monomer/alkydresin contents are network polymer in properties such as viscoelasticity.

• 전자통신동향분석
• /
• 제35권4호
• /
• pp.21-33
• /
• 2020

Single photon detector technologies have emerged as powerful tools in optical quantum information applications such as quantum communication, quantum information, and integrated quantum photonics. Owing to significant attempts in the previous decade at improving photon-counting detectors, several single photon detectors with high efficiency and low noise have been realized within the optical wavelength regime. In this paper, we provide an overview of current studies on single photon detectors operating at wavelengths from the ultraviolet to the infrared. In addition, we discuss applications of single photon detector technologies in quantum communication and integrated quantum photonics.

• 한국인쇄학회지
• /
• 제11권1호
• /
• pp.17-29
• /
• 1993

As inverstigating the influence of monomers and photoinitiator in the polymerization rate of photopolymerization by using IR spectroscopy, photopolymerizations initiated by ultraviolet radiation are characterized by the presence of an autoacceleration in the polymerization rate as the reaction proceeds. The conversion for the end of the autoacceleration varies considerably depending on the monomer and reaction condition which determines coil size and viscosity. In UV curable systems, the autoacceleration begins at only a few percent conversion and continues to 40% in HEA solution and 60% conversion in EHA solution. The polymerization ate in HEA solution increased as follow; DMHA > HCPK > DMPA and could be explained by the interaction between the initiating radical and HEA monomer and the size of the photodissociated radical of initiator. But the tendency of autoacceleration in EHA solution is almost independent on initiator.

• 신재생에너지
• /
• 제16권3호
• /
• pp.1-12
• /
• 2020

Shingled technology is the latest cell interconnection technology developed in the photovoltaic (PV) industry due to its reduced resistance loss, low-cost, and innovative electrically conductive adhesive (ECA). There are several advantages associated with shingled technology to develop cell to module (CTM) such as the module area enlargement, low processing temperature, and interconnection; these advantages further improves the energy yield capacity. This review paper provides valuable insight into CTM loss when cells are interconnected by shingled technology to form modules. The fill factor (FF) had improved, further reducing electrical power loss compared to the conventional module interconnection technology. The commercial PV module technology was mainly focused on different performance parameters; the module maximum power point (Pmpp), and module efficiency. The module was then subjected to anti-reflection (AR) coating and encapsulant material to absorb infrared (IR) and ultraviolet (UV) light, which can increase the overall efficiency of the shingled module by up to 24.4%. Module fabrication by shingled interconnection technology uses EGaIn paste; this enables further increases in output power under standard test conditions. Previous research has demonstrated that a total module output power of approximately 400 Wp may be achieved using shingled technology and CTM loss may be reduced to 0.03%, alongside the low cost of fabrication.