• The Journal of the Acoustical Society of Korea
• /
• v.15 no.1
• /
• pp.10-16
• /
• 1996

Ultrasonic motor is a motor driven by the stator via frictional contact forces generated from ultrasonic vibration of piezoelectric elements. In order to control the ultrasonic motor, it is essential to measure accurately the motor characteristics with respect to driving parameters such as frequency, voltage, phase difference and duty ratio of the driving signals. In this paper, a PC-interfaced evaluation device is developed, and the characteristic curves of the fabricated ultrasonic motor are measured with those parameters. All driving parameters are processed digitally. The developed evaluation device can facilitate charateristics measurements effectively, and provide a base for digital control of the ultrasonic motor.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.19 no.8
• /
• pp.122-130
• /
• 2005

For silent operation, Roll-Screen has been designed by using piezolelectric ultrasonic motor. To drive the ultrasonic motor, a digitally controlled drive system has been designed by using PLD. And to measure the position and velocity of Roll-Screen, encoder with 36 pulse/revolution is used. This paper proposed a new method for a precise velocity control of ultrasonic motor, in spite of using low-level encoder. The proposed method use a non-fixed sampling time and compensate the initial nonlinear characteristics of ultrasonic motors.

• The Journal of the Acoustical Society of Korea
• /
• v.20 no.8
• /
• pp.38-43
• /
• 2001

We developed a new standing wave type ultrasonic linear motor that can be driven bi-directionally. The operation principle of the motor was derived in an analytical form and the detailed structure was designed by the finite element method. Based on the design, a motor sample and a driving circuit were fabricated, and validity of the structure was verified through experiments.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.5 no.2
• /
• pp.105-114
• /
• 2000

To chive a traveling wave type ultrasonic motor with the series""-resonant inverter, the external inductor is i lnserted between the motor and inverter. In $\psi$is paper, we proposed a novel 3Ilalysis method to design the 3 ~xternal inductor. An equivalent model of the ultrasonic motor is expressed, and a selection method of the , ;;eries inductor is proposed from the basis of the model. When the series inductor has an optimal value, it is v velified by computer simulation results that power is efficiently transmitted to the mechanical resonant c component in the motor. The frequency and speed characteristics of the ultrasonic motor are investigated by e experiments for several external inductors. The validity of the proposed method for selecting external inductor i is clarified.clarified.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.6 no.2
• /
• pp.165-171
• /
• 2005

The ultrasonic piezo motor is a new type motor that has an excellent performance and many useful features that electromagnetic motors do not have. But, it suffers from severe system non-linearities and parameter variations especially during speed control. Therefore, it is difficult to accomplish satisfactory control performance by using the conventional PID controller. In this paper, to achieve the precise control for linear type ultrasonic motor was analyzed as a function of response time and change with a driving time. Also, we propose controller that combines STEP controller and PD controller that have error of ${\mu}m$ about liner type ultrasonic motor.

• The Proceedings of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.10 no.6
• /
• pp.88-95
• /
• 1996

The ultrasonic motor(USM) has good characteristics such as compact size, silent motion, high speed responce, low speed and high torque. The USM is driven by 2-phase AC electricity. The control parameters of USM are voltage, phase, and frequency of input powers, etc. In this paper, a voltage difference control is proposed. The voltage difference control has more advantage than phase difference control. Specially, current and power is lower than that of phase difference control. For this voltage diffrence control, we designed USM controller to adjust volatage and phase using PLSI(Programmable Large Scale Integration).

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.07a
• /
• pp.373-376
• /
• 2000

The modified Moonie(Cymbal) transducer has been investigated for an accelerometer application. This paper present a wind-mill type ultrasonic motors using ternary piezoelectric ceramics and aluminum endcaps applied by cymbal transducer. The maximum displacement was increased depend on applied voltage and layer number. The multi-layer was fabricated by tape casting using doctor-blade process. The maximum displacement of multi-layered ultrasonic motor was much higher than that of one-layered.

• Journal of the Korean Ceramic Society
• /
• v.40 no.10
• /
• pp.981-984
• /
• 2003

A novel linear ultrasonic motor for precision position control was designed and fabricated. It was composed of two piezoelectric actuators with longitudinal ultrasonic fluctuations and shaking beam. When two AC electric fields (Usinwt, Ucoswt) were applied to piezoelectric actuators respectively, the middle part of shaking beam had an elliptical trajectory. According to experimental results, the generative force was proportional to pre-load force but the speed of slider was in inverse proportion. And the bar of shaking beam had a same trajectory with simulation result.

• Proceedings of the KIEE Conference
• /
• 2002.04a
• /
• pp.37-39
• /
• 2002

본 논문에서는 유한 요소법을 압전체에 적용하여 계산한 임피던스 파형을 실험적으로 검증하였으며 이를 선형 초음파 모터에 적용하여 선형 초음파 모터의 공진 특성을 해석하였다. 또한 선형 초음파 모터의 동작 특성 및 공진 모드의 타당성을 검증된 유한 요소법을 이용하여 검증하였으며 인가 전압 및 주파수에 따른 선형 초음파 모터의 속도 특성을 뉴럴 네트웍을 이용한 제어법을 통해 검증하였다. 선형 초음파 모터의 정밀 위치 제어의 가능성을 뉴럴 네트웍을 통한 제어법을 통해 검증하였다.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2008.06a
• /
• pp.493-494
• /
• 2008