• 한국해양공학회지
• /
• 제11권4호
• /
• pp.180-188
• /
• 1997

This paper proposes a new efficient MAC(Media Access Control) protocol to establish the ultrasonic communication network for underwater vehicles, which ensures a certain level of maximum throughput regardless of the propagation delay of ultrasonic and allows fast data transmission through the multiple ultrasonic communication channel. A MAC protocol for underwater communication network that allows 'peer-to-peer' communication between a surface ship and multiple underwater systems is designed, and the proposed control protocol is implemented for its verification.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 춘계학술대회 논문집 전자세라믹스 센서 및 박막재료 반도체재료 일렉트렛트 및 응용기술
• /
• pp.168-171
• /
• 2000

Underwater acoustic communications have made considerable advances in the past decade. The purpose of this paper is to achieve the underwater communication by ultrasonic sensors and to investigate conditions of good underwater acoustic communicators. As a result of this experiments, the ultrasonic sensors, MA40E7R/S, made by Nicera can be used as ultrasonic transducers for underwater communication using AM(Amplitude Modulation) signal and Transmission Loss is 17.328[dB] at 65[cm]. To make a good underwater communicator, proper diameter of disk PZT transduers is the one of most important factors, because radiation of acoustic wave depends on proper diameter of transduers and the transmission loss strongly depends on the spreading loss.

• 한국정보통신학회논문지
• /
• 제14권6호
• /
• pp.1391-1396
• /
• 2010

최근 출시되고 있는 PAN 용 통신부품으로 Bluetooth와 Zigbee가 선호되고 있으나 가전제품을 비롯하여 오디오기기, 휴대폰, PC 등에서 비교적 저속으로 단순한 메시지를 전달하는데 있어서 이러한 통신부품을 장착하기에는 다소 부담스럽고 제품이 복잡해진다. 본 논문에서는 제품에 이미 장착되어 있는 스피커와 마이크를 이용하여 가청한계 대역에서 초음파를 이용한 무선 통신 방법을 제안한다. 오디오 신호에 영향을 주지 않고 데이터 전송을 가능하게 하기 위하여 가청 한계 대역에서 ASK와 FSK 송수신 방식을 제시하고, 초음파 통신 모뎀을 설계 및 구현한다. 구현된 통신 모뎀은 배경 잡음이 있는 환경에서 실험을 통해 제안한 초음파 통신 모뎀의 성능을 검증한다.

• 조명전기설비학회논문지
• /
• 제29권1호
• /
• pp.31-36
• /
• 2015

In this paper, an LED lighting system that is capable of automatic or maunal dimming control using a ultrasonic sensor and Bluetooth wireless communication technology is presented. The LED lighting system consists of a ultrasonic sensor, microcontroller unit, Bluetooth wireless communication, LED driver, and LED light source. By using the implemented LED lighting system sample, it is shown that the automatic and manual dimming control is realized. By using the ultrasonic sensor, the LED lighting is automatically brighter or dimmer depending on the distance between the sensor and an object. When using a smartphone that includes Bluetooth wireless communication function, one can not only manually control the brightness of the LED lighting from level 1 to 10, but also monitor the distance between the sensor and object on the smartphone.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2010년도 춘계학술대회
• /
• pp.109-112
• /
• 2010

최근 출시되고 있는 PAN 용 통신부품으로 Bluetooth와 Zigbee가 선호되고 있으나 가전제품을 비롯하여 오디오 기기, 휴대폰, PC 등에서 비교적 저속으로 단순한 메시지를 전달하는데 있어서 이러한 통신부품을 장착하기에는 다소 부담스럽고 제품이 복잡해진다. 본 논문에서는 제품에 이미 장착되어 있는 스피커와 마이크를 이용하여 가청 한계 대역에서 초음파를 이용한 무선 통신 방법을 제안한다. 오디오 신호에 영향을 주지 않고 데이터 전송을 가능하게 하기 위하여 가청 한계 대역에서 ASK와 FSK 송수신 방식을 제시하고, 초음파 통신 모뎀을 설계 및 구현한다. 구현된 통신 모뎀은 배경 잡음이 있는 환경에서 실험을 통해 제안한 초음파 통신 모뎀의 성능을 검증한다.

• 제어로봇시스템학회논문지
• /
• 제20권4호
• /
• pp.428-436
• /
• 2014

This paper proposes a statistical regression method for classifying pillars and vehicles in parking area using a single ultrasonic sensor. There are three types of information provided by the ultrasonic sensor: TOF, the peak and the width of a pulse, from which 67 different features are extracted through segmentation and data preprocessing. The classification using the multiple SVM and the multinomial logistic regression are applied to the set of extracted features, and has achieved the accuracy of 85% and 89.67%, respectively, over a set of real-world data. The experimental result proves that the proposed feature extraction and classification scheme is applicable to the object classification using an ultrasonic sensor.

• 전자공학회논문지SC
• /
• 제44권5호
• /
• pp.38-44
• /
• 2007

본 논문은 초음파 거리를 이용하여 캡슐 내시경의 3차원 위치 측정 방법과 자세각을 측정하는 방법을 제시하였다. 인체의 불규칙한 초음파 전달 특성들에 의해 발생되는 측정 에러를 줄이기 위해서 제안된 트랙킹 시스템은 초음파센서들을 사용하였다. 캡슐 내시경과 바인더 시스템까지의 거리 정보를 이용하여 캡슐 내시경의 3-D 위치 정보와 자세 정보를 추적하는 방법을 제안한다. 제안된 방법은 Matlab으로 랜덤 오차를 포함하여 시뮬레이션 하였다. 3-D 위치 측정 결과는 평균오차 0.8mm, 자세 측정 결과는 평균 오차 $0.2^{\circ}$의 결과를 얻었다. 캡슐 내시경의 위치 정보와 자세 정보를 이용하여 의사들이 정확한 발병 위치를 진단 할 수 있도록 하였다.

• 센서학회지
• /
• 제26권1호
• /
• pp.66-72
• /
• 2017

The three dimensional ultrasonic anemometer was constructed to reduce the disadvantages of the two-dimensional anemometer and to be free from the use environment. Three pairs of transmitting and receiving ultrasonic sensors were designed to face each other at an angle of $45^{\circ}$ to the upper and lower surfaces at intervals of $120^{\circ}$. 200 kHz ultrasonic sensor Oscillation, transmission and reception, level detection, power supply circuit were designed and U, V, W wind speed vector components were obtained by measuring the time of first received ultrasonic pulse by transmitting pulse ultrasound. It is implemented as firmware in ARM Coretex-M3 processor so that horizontal and vertical wind direction and wind speed can be converted into digital signal by vector calculation. In this study, The three-dimensional ultrasonic anemometer can complement the disadvantages of the two-dimensional anemometer (mechanical and ultrasonic), and it is expected to gradually replace the two-dimensional anemometer due to its high utilization rate by collecting additional information such as vertical wind.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 하계학술대회 논문집 D
• /
• pp.2619-2621
• /
• 2001

This study proposes a new efficient MAC(media access control) protocol to establish the ultrasonic communication network for under water vehicles, which ensures a certain level of maximum throughput regardless of the propagation delay of ultrasonic and allows fast data transmission through the multiple ultrasonic communication channel. In this study, a media access control protocol for underwater communication network that allows 'peer-to-peer' communication between a surface ship and multiple underwater system is designed, and the proposed control protocol is implementde for its verification.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2002년도 춘계학술대회 논문집
• /
• pp.167-172
• /
• 2002

Recent years, optical components'are widely used in optical communication industry for high speed and mass storage data processing. Micro grooving of planar lightwave circuit and glass, those are widely used in optical component, are realized by polycrystalline diamond tool with ultrasonic vibration. To know the characteristics of brittle materials cutting, ultrasonic vibration cutting tool and machining system are built for the experiment. Grooving on planar lightwave circuit and glass experiments are performed and their shape are measured by photograph with microscope. It reveals that better groove shape with low chipping of planar lightwave circuit and glass are obtained by micro grooving machining with ultrasonic vibration. These experiments are considered as a possibility to the micro grooving of optical communication components.