• Journal of Korean Society for Geospatial Information Science
• /
• v.19 no.4
• /
• pp.35-45
• /
• 2011

The purpose of this study is visualizing climate change contents from Weather Research and Forecasting model and providing useful tool to anyone who want to use them for communication and actual movement. As a results, we have built a process and user interface for publishing Arrow KML, BWS KML, and DI KML. Arrow KML provide wind rose service and wind attribute information for each arrow. BWS KML provide a wind power index and DI KML provide a thermal comfort. All KML contents are more reliable because those are visualized from the scientifically verified climate change prediction model. Further study will focus on searching for climate change contents mining and useful contents design for wide range of climate change mitigation/adaptation activity.

• Journal of the Korea Society for Simulation
• /
• v.23 no.2
• /
• pp.35-46
• /
• 2014

This study investigates the wargame model application of SCO(Standard Combat Organization) concept and function for the first time. Firstly, we examine the combat organization function of wargame models suggested by published theses and research papers, and then analyze input processes and detail function of GORRAM(Ground Operation Resources Requirement Model) combat organization that is related to wargame logic. Secondly, we also reflect developed SCO algorithm and function, as follows. We defined SCO concept, and developed UI(User Interface) design and algorithm using main functions that are deducted by analyzing of existing combat organization. This algorithm consists of process, SCO, and error check algorithms. Finally, we analyzed the results of statistic verification on input time reduction and user convenience of combat organization function. Therefore, this study contributes to improving input time and user convenience of combat organization, as well as structuring new function of wargame model through the application of SCO concept and function.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.23 no.11
• /
• pp.1297-1306
• /
• 2012

This work presents a 77 GHz radar transmitter for the automotive radar system. An integrated 13 GHz frequency synthesizer fabricated using 130 nm RF CMOS process drives a commercial W-band compound semiconductor monolithic multifunction amplifier(MPA), which includes a frequency multiplier by six to generate 77 GHz transmitting signal. The 13 GHz frequency synthesizer includes a high efficiency injection buffer of 4 dBm output power to drive the MPA. The output power of 77 GHz radar transmitter is higher than 13.99 dBm and the magnitude of the reference spur relative to the carrier is -36.45 dBc. The phase noise is -81 dBc/Hz at 1 MHz offset frequency from the carrier.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.14 no.5
• /
• pp.39-46
• /
• 2006

The fuel cell is one of promising environment-friendly energy sources for the next generation. The bipolar plate is a major component of the PEM fuel cell stack, which takes a large portion of stack cost. In this study, as alternative materials for bipolar plate of PEM fuel cells, graphite composites were fabricated by compression molding. Graphite particles mixed with epoxy resin were used as the main substance to provide electric conductivity To achieve desired electrical properties, specimens made with different mixing ratio, processing pressure and temperature were tested. To increase mechanical strength, one or two layers of woven carbon fabric were added to the graphite and resin composite. Thus, the composite material was consisted of three phases: graphite particles, carbon fabric, and epoxy resin. By increasing mixing ratio of graphite, fabricated pressure and process temperature, the electric conductivity of the composite was improved. The results of tensile test showed that the tensile strength of the two-phase graphite composite was about 4MPa, and that of three-phase composite was increased to 57MPa. As surface properties, contact an91e and surface roughness were tested. Graphite composites showed contact angles higher than $90^{\circ}$, which mean low surface energy. The average surface roughness of the composite specimens was $0.96{\mu}m$.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.50 no.6
• /
• pp.435-444
• /
• 2022

This study conducts capture simulations of space debris using a space-net. The present capture simulations are performed using ABAQUS, a nonlinear structural dynamics analysis code. A square space-net with 1 m × 1 m and a space debris with a cube configuration(0.3 m × 0.3 m × 0.3 m and 30 kg) are considered as baseline models. Using the baseline models, the capture simulation using ABAQUS is conducted to understand the capture process and establish the criteria of capture success or fail. In addition, the capture simulations are performed when various properties of the space-net are considered, and it is investigated that major design factors of the space-net are recognized to capture successfully the space debris.

• Journal of Practical Engineering Education
• /
• v.16 no.2
• /
• pp.167-177
• /
• 2024

In nursing education, there has been efforts for enhancing the quality, with a growing interest in the utilization of digital technologies. In clinical training of nursing curriculum, the emphasis on digital technology is pronounced, as it has the potential to offer learners effective and accessible educational experience while enabling the integrated management of individualized learning outcomes. This study developed a digital nursing education platform, allowing educators and learners to select functionalities based on the educational content and characteristics of the learning tools. Additionally, the user interface was designed to facilitate learners' accurate understanding and execution of assigned tasks and objectives. The detailed design and implementation process of the platform are elaborated and then the validation of its usefulness was provided based on feedback from ten educators who are responsible for diverse subjects. The high usability of the digital nursing practicum education platform was confirmed, with potential implications for significant improvements in learner performance. The potential of this digital platform is to lead to innovative shifts in educational methodologies within the field of integrative nursing education.

• Journal of Korean Society for Atmospheric Environment
• /
• v.29 no.5
• /
• pp.601-614
• /
• 2013

The commercial charcoal kiln was projected the largest source of biomass burning sector in Korea. Commercial charcoal kiln was operated to emit air pollutants into the air without any air pollution prevention equipment. The object of this field survey was to understand characteristics of air pollutants concentration and emission factors and to provide preliminary data for effective processor from oak charcoal manufacturing process. As result of field survey, TSP, $PM_{10}$ and $PM_{2.5}$ concentration from charcoal kiln were 400~37,000 $mg/m^3$. These values were over the 100 $mg/m^3$ in TSP, this value was effluent quality standard of Clean Air Conservation Act. The average concentration of CO, $SO_2$ and TVOC were 2~5%. 0~110 ppm and 820~10,000 ppm respectively. The emission factors were 42.4 g-PM/kg-oak in TSP, 40.3 g-PM/kg-oak in $PM_{10}$, 38.2 g-PM/kg-oak in $PM_{2.5}$, 182.5 g-CO/kg-oak, 1.0 g-NO/kg-oak, $SO_2$ 0.2 g-$SO_2/kg$-oak and 104.4 g-TVOC/kg-oak. The part of commercial charcoal kiln had air pollution prevention equipment but it was difficult to work properly. Much wood tar excreted in exhaust emissions from oak charcoal manufacturing process. This wood tar was cause of many troubles sticking in the air pollutant prevention equipment. For handling particulate matters and gaseous air pollutants from oak charcoal manufacturing process in biomass burning, air pollutant prevention equipment design and management needs preprocessor for removal wood tar.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.24 no.9
• /
• pp.936-943
• /
• 2013

This work presents the design and measured results of the single channel automotive radar system for 76.5~77 GHz long range FMCW radar applications. The transmitter uses a commercial GaAs monolithic microwave integrated circuit(MMIC) and the receiver uses the down converter designed using 65 nm CMOS process. The output power of the transmitter is 10 dBm. The down converter chip can operate at low LO power as -8 dBm which is easily supplied from the transmitter output using a coupled line coupler. All MMICs are mounted on an aluminum jig which embeds the WR-10 waveguide. A microstrip to waveguide transition is designed to feed the embedded waveguide and finally high gain horn antennas. The overall size of the fabricated radar system is $80mm{\times}61mm{\times}21mm$. The radar system achieved an output power of 10 dBm, phase noise of -94 dBc/Hz at 1 MHz offset and a conversion gain of 12 dB.

• Korean Journal of Heritage: History & Science
• /
• v.56 no.1
• /
• pp.142-160
• /
• 2023

The position of the people who participated in the Bapyo Ritual held in the reign of King Sejong and the corresponding costumes were examined. The king, who was the executive body of the ritual, wore Myeon-Bok, a court dress, and Myeon-Bok was Gujang-Bok made of Jang-wha on Guryu-Pyeongcheongwan. Crown princes, royal families, and government officials wore Oryang-Gwan and Jekraeui, which were Jobok. The crown princes' Joboks were changed from Oryang-Gwan to Wukryang-Gwan in the dynasty year 10 of King Sejong, and in the year of King Munjong's accession, Myeon-Bok was received, and after King Danjong, the crown princes wore Palryu-Pyeongcheongwan and Chiljang-Bok. Diplomats and Jongsagwan who were the envoys wore Sangbok. A Sangbok worn by the diplomat was Samo with Danryeong, Seo-Dae, and Hyeopgeum-Hwa, and a Sangbok worn by Jongsagwan was Samo, Danryeong, Heukgak-Dae, and Heukpi-Hwa. Byulgam, who served as an attendant to the king in the king's close quarters, wore Gongbok and Sangbok. Gongbok consisted of Ja-Geon, Danryeong and Heukpi-Hwa, and Sangbok consisted of orange color Cho-Rip, Jikryeong, Joa, and Heukpi-Hwa. The person holding San, Gae , Sujeongjang, and Geumwolbu wore Ja-Geon and Cheong-Ui, and Seon wore Pimoja and Hong-Ui. Siwigun wore armor and helmets equipped with weapons. Among court musicians, Aksa's costumes consisted of Bokdu, Bigongbok, Geumdonghyeokdae, Bibaekdaedae, and Opiri, and Aksaeng's one composed of Gaechaek, Bisuransam, Hyupgo, Mal, Maldae, and Opiri. As a result of the above, the process of ceremonial clothes becoming uniform clothes in the reign of King Sejong was confirmed. The king and lower-ranking officials such as crown princes, government officials, diplomats, Byulgam, armies for ceremonial weaponry, and court musicians participating in the Bapyo Ritual wore the highest grade of ceremonial clothes for each class. King Sejong had repeated discussions to build a nation based on Confucianism, and arranged each rite and corresponding costume, and the Bapyo Ritual costume was also systematically prepared for each position. The ceremonial clothing organized during the reign of King Sejong was regulated in Yejon and became the basis for continuing to the late Joseon Dynasty.

• Journal of the Korea Computer Industry Society
• /
• v.5 no.3
• /
• pp.393-404
• /
• 2004

Recently, public home have used a more than two computer connected with network, and several home appliances using independently with internet or network are developing to be related closely with the network. Therefore, the home utilized for a simple terminal of the global network in the past is being expanded to another part of the sub network. For a variety of connecting home-area protocols with the existing existing network, we require a new Residential Gateway(RG) that does not only make the home-area network operating in the sub network but also connects to the external network. In this paper, RG has intrinsic limits against flexible service due to IP address assignment and hardware capacity. In order to solve this problem in the RG, we propose a Management Server(MS). The MS that offers the integrated managements and control services for a variety of devices connected the RG in the home-area. It can not only solve the dynamic IP address assigning problem but also assigns private IP addresses to the home network devices through the Network Address Translation(NAT). It also provides somewhat useful functions for the home network and the RG for other additional services. <중략> The MS is using a SNMP protocol for managing the RG in the domain, a polling method of the MS and the RG compose a sequence polling method, a polling method using a multi-process and a multi-thread. In this paper, we introduce a problem with polling method separately, show a polling method between the MS and the RG using a multi-thread.