• 한국자동차공학회논문집
• /
• 제12권2호
• /
• pp.17-23
• /
• 2004

A cylindrical constant volume combustion bomb is used to investigate the combustion characteristics and to analyze the heat quantity of homogeneous charge methane-air mixture under various initial pressures, excess air ratios and ignition times. As the overall pressure increase, the values of maximum combustion pressure, maximum heat release rate and cumulative heat release have been increased. But it is not very meaningful to compare with some values such as maximum combustion pressure, maximum heat release rate and cumulative heat release for different overall pressure due to the different heat energy of supplied fuel. So the each value is needed to be compared with normalized value, which is divided by the entered fuel energy. To analyze the heat quantity, some definitions including the CHR ratio, the UHC ratio and the HL ratio are needed and are calculated. As the overall pressure increase, the CHR ratios and the UHC ratios have been decreased, while the HL ratios have been increased. The CHR ratio of 300 ms has the higher value than that of 10000ms, and the HL ratios of 300 ms have a lower value.

• 한국자동차공학회논문집
• /
• 제12권2호
• /
• pp.1-8
• /
• 2004

A cylindrical constant volume combustion chamber was used to investigate the exhaust emission characteristics of homogeneous charge, stratified pattern and inhomogeneous charge under various conditions using gas chromatography. In the case of homogeneous charge condition, the $CO_2$ concentration is proportional to excess air ratio and overall charge pressure, the $CO_2$ concentration is proportional to excess air ratio and the UHC concentration is inversely proportional to ignition time and overall charge pressure. In the case of stratified pattern, the RI(rich injection) condition shows better exhaust emission characteristics, especially $CO_2$, than that of HI (homogeneous injection) or LI (lean injection) conditions. In inhomogeneous charge conditions, when initial charge pressure is increased, $CO_2$ and UHC concentration is reduced but $O_2$ concentration is increased. And when the excess air ratio of initial charge mixture is 3.0, UHC and $CO_2$concentration show lowest values.

• 대한기계학회논문집B
• /
• 제27권11호
• /
• pp.1563-1571
• /
• 2003

This paper is the second part of several companion papers which compare the method of Air-fuel ratio(AFR) determination. In the previous paper, Eltinge chart was applied to the arbitrary fuel composition and the charts for gasoline, diesel, methanol, M85, liquefied petroleum gas(LPG), natural gas(NG), propane and butane were illustrated. In Eltinge chart, however, unburned hydrocarbon (UHC) is not used for determination of AFR. For improving accuracy, Eltinge suggested UHC compensation after the AFR reading in the chart. This compensation reduced the difference between real and reading value. In the compensation, however, the correction of oxygen and carbon dioxide is uncertain and there might be a mistake in conversion of UHC reading value. Therefore, the error is overestimated comparing with Spindt one which is most widely used. In addition, there is no comparison of the value with other useful methods. In this paper, the compensation of unburned HC was performed in Eltinge chart and the compensated value was compared with Spindts formula over wide range of AFR. The objects of investigating fuel are gasoline, methanol, NG and LPG. The result shows that Eltinge and Spindt method is flawlessly compatible and the difference between the two methods is under 0.3% in a λrange from 0.9 to 1.7. The method fur debugging instrumentation error is also presented.

• 한국자동차공학회논문집
• /
• 제12권2호
• /
• pp.24-31
• /
• 2004

A cylindrical constant volume combustion bomb is used to investigate the combustion characteristics and to analyzer the heat quantity of inhomogeneous charge methane-air mixture. To analyze the heat quantity, some definitions including the CHR ratio, the UHC ratio and the HL ratio are needed and are calculated. It is shown that the effect of stratification is not significant in case of the overall excess air ratio of 1.1, mainly due to the higher heat loss and lower thermal efficiency compared to those of homogeneous condition. In the case of the overall excess air ratio of 1.4, as the initial charge pressure decreases, the CHR ratio has been decreased while the HL ratio has been increased, Generally, as the initial charge pressure increases, the amount of injection mixture has been decreased and has resulted in lower mean velocity and turbulence intensity for injection mixture. Also, the injected mixture is too rich to result in mixing deficiency in combustion chamber. From these results, it could be possible to acquire the improvement of thermal efficiency and the reduction of heat loss simultaneously through the 2-stage injection in CNG direct injection engine.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2009년도 춘계학술대회 논문집
• /
• pp.247-250
• /
• 2009

촉매 연소는 낮은 온도와 희박한 조건에서 연소가 가능할 뿐만 아니라 $NO_x$, CO, UHC와 같은 오염물질을 효과적으로 감소시킬 수 있다. 하지만 촉매연소는 균질 반응뿐만 아니라 비균질 반응에 의해서 지배되는 매우 복잡한 반응과정을 가지고 있기 때문에 촉매 연소기의 안정적인 작동을 위해서는 다양한 탄화수소의 촉매연소 특성에 대한 연구가 필요하다. 연구에서는 메탄 촉매연소 특성에 대한 수치적 연구의 검증을 거친 후 수소의 공급량, 과잉공기비, 그리고 공간속도의 변화에 따른 프로판의 촉매연소 특성을 고찰하였다.

• 한국항공우주학회지
• /
• 제40권4호
• /
• pp.309-315
• /
• 2012

촉매연소는 희박조건에서 작동할 수 있을 뿐만 아니라 UHC, CO, 그리고 NOx와 같은 공해물질의 배출을 억제할 수 있기 때문에 연소효율이 좋고 환경친화적인 연소방식이다. 따라서 본 연구에서는 백금계열의 촉매를 이용한 $CH_4$, $C_2H_6$, 그리고 $C_3H_8$ 연료의 촉매연소 특성에 관한 수치해석 연구를 수행하였다. 1차원 및 Langmuir-Hinshelwood 모델을 적용한 지배방정식을 설명한 후 촉매연소기의 설계변수, 즉, 입구온도, 과잉공기비, 그리고 공간속도가 촉매연소에 미치는 영향을 고찰하였다. 사용된 연료 중에서 $C_3H_8$의 화학적 구조 및 반응성 때문에 출구온도 및 전환율이 가장 높음을 확인할 수 있었다.

• International Journal of Automotive Technology
• /
• 제6권4호
• /
• pp.323-332
• /
• 2005

A cylindrical constant volume combustion chamber was used to investigate the flow characteristics at the spark electrode gap and the combustion characteristics of a homogeneous charged methane-air mixture under various overall charge pressures, excess air ratios and ignition times. The flow characteristics, including the mean velocity and turbulence intensity, were analyzed with a hot wire anemometer. Combustion pressure development measured by piezoelectric pressure transducer, a flame propagation image acquired by ICCD camera and exhaust emissions measured by 2-valve gas chromatography were used to investigate effects of initial pressures, excess air ratios and ignition times on the combustion characteristics. It was found that the mean velocity and turbulence intensity had the maximum value around 200-300 ms and then decreased gradually to a near-zero value after 3000 ms and that the combustion duration was shorten and the flame speed and laminar burning velocity had the highest value under the condition of an excess air ratio of 1.1, an overall charge pressure of 0.15 MPa and an ignition time of 300 ms in the present study. The $CO_2$ concentration was proportional to the ignition time and overall charge pressure, the $CO_2$ concentration was proportional to the excess air ratio, and the UHC concentration was inversely proportional to the ignition time and overall charge pressure.

• 대한기계학회논문집B
• /
• 제36권4호
• /
• pp.405-412
• /
• 2012

MCFC 발전시스템에서 연소기는 연료극의 배가스 중에 포함된 미반응 가스를 연료로 사용하여 공기극에 $H_2O$와 $CO_2$ 농도가 높은 고온의 혼합가스를 공급하는 역할을 한다. 하지만 이러한 배가스는 가연한계 이하로 내려가게 되어 통상적인 연소방식에 의한 완전연소가 어렵기 때문에 이를 해결하기 위하여 촉매연소기를 사용한다. 완전연소 및 이에 다른 공해물질의 저감 특성에 따라 최근 촉매연소는 환경친화적인 연소방식으로 주목받고 있다. 따라서 본 연구에서는 MCFC 발전시스템의 BOP 시스템에 적용되는 촉매연소기에 대한 실험연구를 수행하였다. 본문에서는 실험장치를 설명한 후 촉매연소 시스템의 설계변수, 즉, $H_2$ 연료 첨가에 따른 연료조성, 유입가스의 온도, 과잉 공기비, 촉매의 종류, 그리고 시동 스케줄에 따른 촉매연소 특성을 고찰하였다.