• Journal of Dental Rehabilitation and Applied Science
• /
• v.16 no.1
• /
• pp.13-25
• /
• 2000

Optimal Pressable Ceramic is one of the all-ceramic restorations with a shaded translucent pressed core and layering porcelains. The purpose of this study was to evaluate the marginal fidelity according to margin types and measurement sites, and to evaluate fracture strength according to margin types. Twenty seven OPC crowns made according to 3 types of cervical finishing lines were used in this study. Marginal gaps were measured before and after cementation. A Steromicroscope(SZ-ST(R), Olympus, Japan) was used to measure the space between the margin of OPC crown and the finishing line of metal model. Marginal gaps were measured at the labial, mesial, lingual and distal site, which were demonstrated in advance. Fracture strength testing was carried out using an Instron(Model M100EC, Mecmesin, England) at a cross head speed of 5 mm/min. All crowns were loaded until catastrophic failures occurred. The result were as follow: 1. In comparison according to variable margin before cementation, the marginal gap were increased in chamfer margin($47.50{\pm}18.39{\mu}m$), $120^{\circ}$shoulder margin ($55.21{\pm}14.4{\mu}m$) and $90^{\circ}$shoulder margin($71.18{\pm}13.30{\mu}m$) in ascending order, and there were significant differences between chamfer margin and $90^{\circ}$shoulder margin, $120^{\circ}$shoulder margin and between $120^{\circ}$shoulder margin and $90^{\circ}$shoulder margin respectively(p<0.05). 2. In comparison according to variable margin after cementation, the gap discrepancies were increased in chamfer margin($60.78{\pm}30.37{\mu}m$), $120^{\circ}$shoulder margin($66.67{\pm}11.18{\mu}m$) and $90^{\circ}$shoulder margin($85.78{\pm}17.23{\mu}m$) in ascending order, but there was significant difference only between chamfer margin and $90^{\circ}$shoulder margin(p<0.05). 3. Labio-lingual points showed a better marginal fidelity than that of proximal point(p<0.05). 4. Chamfer margin($48.76{\pm}8.45kgf$) showed higher fracture strength than $120^{\circ}$ shoulder margin($40.57{\pm}7.90kgf$) and $90^{\circ}$ shoulder margin(32.7.90kgf) (p<0.05), but there was significant difference only between chamfer margin and $90^{\circ}$ shoulder margin(p<0.05).

• Nuclear Engineering and Technology
• /
• v.50 no.6
• /
• pp.820-828
• /
• 2018

The growing nuclear threat has amplified the need for developing diverse and accurate nuclear forensics analysis techniques to strengthen nuclear security measures. The work presented here is part of a research effort focused on developing a methodology for reactor-type discrimination of weapons-grade plutonium. To verify the developed methodology, natural $UO_2$ fuel samples were irradiated in a thermal neutron spectrum at the University of Missouri Research Reactor (MURR) and produced approximately $20{\mu}g$ of weapons-grade plutonium test material. Radiation transport simulations of common thermal reactor types that can produce weapons-grade plutonium were performed, and the results are presented here. These simulations were needed to verify whether the plutonium produced in the natural $UO_2$ fuel samples during the experimental irradiation at MURR was a suitable representative to plutonium produced in common thermal reactor types. Also presented are comparisons of fission product and plutonium concentrations obtained from computational simulations of the experimental irradiation at MURR to the nondestructive and destructive measurements of the irradiated natural $UO_2$ fuel samples. Gamma spectroscopy measurements of radioactive fission products were mostly within 10%, mass spectroscopy measurements of the total plutonium mass were within 4%, and mass spectroscopy measurements of stable fission products were mostly within 5%.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2000.05a
• /
• pp.1-1
• /
• 2000

The results of the modification of metal materials treated by high temperature pulst:d plasma fluxes (HTlPPF) with a specific power of incident flux changing in the $(3...100)10^5{]\;}W/cm^2$ range and a pulse duration lying from 15 to $50{\;}\mu\textrm{s}$ have been presented. The results of HTPPF action were studied on the stainless steels of 18Cr-l0Ni, 16Cr- 15Ni, 13Cr-2Mo types; on the structural carbon steels of (13...35)Cr, St. 3, St. 20, St. 45 types; on the tool steels of U8, 65G, ShHI5 types, and others; on nickel and high nickel alloy of 20Cr-45Ni type; on zirconium- and vanadium-base alloys and other materials. The microstructure and properties (mechanical, tribological, erosion, and other properties) of modified materials and surface alloying of metals exposed to HTPPF action have been investigated. It was found that the modification of materials by HTPPF resulted in a simultaneous increase of several properties of the treated articles: microhardness of the surface and layers of 40...60 $\mu\textrm{m}$ in depth, tribological characteristics (friction coefficient, wear resistance), mechanical properties ({\sigma_y}, {\;}{\sigma_{0.2}}.{\;}{\sigma_r}) on retention of the initial plasticity ($\delta$), corrosion resistance, radistanation erosion under ion irradiation, and others. The determining factor of the changes observed is the structural-phase modification of the near-surface layers, in particular, the formation of the fine cellular structure in the near-surface layers at a depth of $20{\;}{\mu\textrm{m}}$ with dimension of cells changing in the range from 0.1 to $1., 5{\;}\mu\textrm{m}$, depending on the kind of material, its preliminary treatment, and the parameters of plasma fluxes. The remits obtained have shown the possibility of purposeful surface alloying of metals exposed to HTPPF action over a depth up to 20...45 $\mu\textrm{m}$ and the concentration of alloying element (Ni, Cr, V) up to 20 wt.%. Possible industrial brunches for using the treatment have been also considered, as well as some results on modifying the serial industrial articles by HTPPF.

• Journal of Ocean Engineering and Technology
• /
• v.31 no.3
• /
• pp.219-226
• /
• 2017

In this study, the impact characteristics of subsea pipelines that were installed in various soil types and burial depths were evaluated by a numerical method. An impact scenario replicated a dropped ship anchor that fell vertically and impacted an installed subsea pipeline. In order to calculate the impact force through terminal velocity, FLUENT, a computational fluid dynamic program and MDM (Moving Deforming Mesh) technique were applied. Next, a dynamic finite element program, ANSYS Explicit Dynamics, was used for impact analysis between the anchor and pipeline (or, subsea if they were buried). Three soil types were considered: loose sand, dense sand and soft clay by applying the Mohr-coulomb model to the seabed. The buried depth was assumed to be 0 m, 1 m and 2 m. In conclusion, a subsea pipeline was the most stable when buried in dense sand at a depth of 2 m to prevent impact damage.

• Biomedical Science Letters
• /
• v.11 no.4
• /
• pp.465-471
• /
• 2005

Ofloxacin has antimycobacterial activity that possibly contributes a pivotal role in the second-line drug regimens that are used for the treatment of multidrug-resistant tuberculosis. However, in some communities, the resistance rate of Mycobacterium tuberculosis to this agent is surging. Therefore, a rapid and accurate method that can be used to determine the resistance of M tuberculosis to the ofloxacin can be very useful for effective treatment of the patients. As an effort to develop such a method, this study was set up to reveal general types of mutations that are related to ofloxacin resistance of M tuberculosis. From previous studies, it has been well known that ofloxacin resistance is associated with mutations in a gene encoding the gyrase A subunit protein. In this study, we obtained 43 ofloxacin-resistant and 50 ofloxacin-susceptible M tuberculosis clinical isolates from Masan National TB Hospital, and sequences of DNA fragment of 320 bp, region of gyrA corresponding to the ofloxacin resistance-determining region were analyzed. In brief, the results showed that a total of seven mutation types were found at gyrA. Theses mutations were all clustered within nucleotides 2574 to 2586 of the gyrA gene (codons 88 to 94). Codon 94 was the most frequently substituted site. Twenty-four of the 43 isolates had mutations at this position resulting in a total of five different types of amino acid changes $(Asp{\to}Ala,\;Asp{\to}Gly,\;Asp{\to}His,\;Asp{\to}Tyr,\;and\;Asp{\to}Asn)$. Five isolates contained a mutation at codon 90 resulting $Ala{\to}Val$ change. Four isolates had mutations at codon 91 causing a $Ser{\to}Pro$ change at this site. Two isolates contained a mutation at codon 88 and each of them resulted in different types of amino acid changes $(Gly{\to}Cys,\;Gly{\to}Ala)$. On the other hand, polymorphic site at codon 95 was found in both ofloxacin-resistant and ofloxacin-susceptible isolates. From these results, we concluded that the rate of mutations present in gyrA among ofloxacin-resistant M. tuberculosis in Korea is similar to the general rates of mutations found throughout the world. Subsequently, an oligonucleotide probe was designed based on the results of sequence analysis and was used to develop a dot blot hybridization assay system to determine ofloxacin-resistance of M tuberculosis. To evaluate this probe, dot-blot hybridization was carried out using other 57 clinical isolates, and the results showed that the dot-blot hybridization assay is good for detecting sequence alterations atgyrA gene.

• Bulletin of the Korean Mathematical Society
• /
• v.39 no.4
• /
• pp.645-652
• /
• 2002

In this note we investigate some results which concern the types of local rings. In particular it is shown that if the type of a quasi-unmixed local ring A is less than or equal to depth A ＋ 1, and $\hat{A}_p$ is Cohen-Macaulay for every prime $p\neq\hat{m}$, then A is Cohen-Macaulay. (This implies the previously known result: if A satisfies $(S_{n-1})}$, where n is the type of a .ins A, then A is Cohen-Macaulay.)

• Proceedings of the SAREK Conference
• /
• 2008.06a
• /
• pp.569-574
• /
• 2008

Recently, the domestic remodeling market is increased in scale. This study is to develop the sanitary piping system which improves quality of life and facility performance when the aged public housing is remodeled. Above all, we found out three standard floor plans in bathrooms of the public housing. And then, the plan and section types of the sanitary piping system were developed for the on-floor piping, a construction cost of each section types was estimated to review the economical fact. Also, the field mock-up test was performed in the type of the pipe shaft with on-floor pit. In result, the developed sanitary piping system was available for the remodeling public housing without a great facility cost. Additionally, the sanitary pipe was replaced easily through the shaft and on-floor fit. And a noise was reduced to a lower unit when the water flowed down.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.42
• /
• pp.5.1-5.9
• /
• 2020

Immunomodulation is a technique for the modulation of immune responses against graft material to improve surgical success rates. The main target cell for the immunomodulation is a macrophage because it is the reaction site of the graft and controls the healing process. Macrophages can be classified into M1 and M2 types. Most immunomodulation techniques focus on the rapid differentiation of M2-type macrophage. An M2 inducer, 4-hexylresorcinol, has been recently identified and is used for bone grafts and dental implant coatings.

• Journal of Forest and Environmental Science
• /
• v.38 no.3
• /
• pp.141-151
• /
• 2022

Soil seed banks as natural storage of plant seeds play an important role in the maintenance and regeneration of watershed. Natural regeneration potential of the soil seed bank of Land use types (LUTs) in Ogun River watershed (ORW) was investigated. ORW was stratified using proportionate sampling technique into Guinea Savannah (GS), Rainforest (RF) and Swamp Forest (SF) Ecological Zones (EZs). Three LUTs: Natural Forest (NF), Disturbed Forest (DF) and Farmland (FL) were purposively selected in GS: GSNF, GSDF, GSFL; RF: RFNF, RFDF, RFFL and SF: SFNF, SFDF, SFFL, respectively. Systematic line transects was used in the laying of the sample plots. Sample plots of 25 m×25 m were established in alternate positions. Ten 1 m×1 m quadrats were randomly laid for soil core sampling from previously randomly selected ten plots. The core samples (10) were pooled per plot in each LUT and placed in individual trays. Ten trays with sterilized soil were used as control. The trays were watered regularly and checked for seedlings emergence fortnightly for 18 months. The experimental design used was 3×3 factorial experiments. ANOVA, Diversity index (H') and Similarity index (SI) were used to analyze the data. There was significant difference in seedling emergence among ecological zones and land use types (p<0.05). A total of 4,400 seedlings emerged from the soil samples. All species were distributed among 32 families. FL in the RF had the highest number of germinated seeds (705±37.33 seedlings) followed by DF in the RF (701±49.6 seedlings). The lowest emergence was in NF of the SF (199±28.41 seedlings). DF in the RF had highest number of species (34) distributed among 22 families. Emergence from soil seed bank of NF in ORW was generally with more of tree species than herbs that were predominant in FL and DF.

• Journal of Community Nutrition
• /
• v.2 no.2
• /
• pp.97-104
• /
• 2000

The purpose of this study was to investigate meal behavior and food preferences of children with different body types. This survey was conducted using a questionnaire for 274 boys and 257 girls in the 6th grade of elementary school in Anyang city. A questionnaire method was used. Food preferences of 14 food groups were tested with 5 likert scale points. Body types were divided with weight-length index(WLI) calculated by height and weight. The cut-off point for the underweight children was 90, and that of the overweight children was 100. The mean weight of the underweight children(26.2%) was 31.9$\pm$4.0kg, and that of the overweight children(26.9%) was 49.4$\pm$6.3kg. The average BMI of overweight children and underweight children was 21.0kg/$m^2$ and 15.5kg/$m^2$respectively. Perceived health status was different based on body types, and more of the overweight children answered they are healthy compared to the underweight children, Body types were not significantly different based on parent's education and occupation. Only 56.7% of the children ate breakfast at a regular time, 60% and 42.9% of the children had their lunch and dinner at regular time, respectively. Higher percentage of overweight children had irregular breakfast(20.1%) and skipped their breakfast and dinner compared to the other groups, however only dinner was statistically significant. The most frequently answered reasons for skipping meals were 'no time to eat'(50%) and 'bad side-dishes'(17.0%). Food preference was not different among the body type groups, however rice-cake was preferred in the underweight group, as well as milk and lettuce were preferred in overweight group. The preferences for milk and grain powdered drink(misitgaru) were same as or a carbonated soft drink. Focusing pubericant, it is necessary to have a regular breakfast. With regard to the importance of nutrition and health for children, the nutrition education for meal behavior and food preference to achieve a balanced diet should be considered.