• 콘크리트학회논문집
• /
• 제14권6호
• /
• pp.813-822
• /
• 2002

본 연구에서 초기재령 콘크리트의 단면 내 수화도와 온도 및 습도분포를 구하는 3차원 유한요소 해석 프로그램을 개발하기 위한 수화도에 따른 재료 모델을 제시하고, 수치해석 절차에 관하여 정립하였다. 재료물성이 급격히 변화하는 초기재령 콘크리트의 거동을 모사하는 과정에서 온도 및 습도에 관련된 재료 물성이 수화도에 따라 결정하였다. 또한 수분거동 연구는 경화한(mature) 콘크리트에 대해서는 여러 연구자에 의해 수행되었지만, 초기재령 콘크리트의 전달계수, 수분용량에 관한 연구는 제대로 정립되지 않은 실정이다. 또한 일반적으로 보통콘크리트에서 무시되는 수분감소항은 고강도 및 고성능 콘크리트의 자기건조(self-desiccation)와 관련된 자기수축(autogenous shrinkage)을 유발하고, 이는 구조물의 장기 내구성 및 사용성 측면에서 중요한 관심사이다. 따라서 본 연구는 초기재령 콘크리트의 온도 및 수축에 의한 응력을 평가하기 위하여, 고강도 및 고성능 콘크리트를 포함한 초기재령 콘크리트의 온도 및 수분거동을 적절히 표현하는 수학적 재료 모델을 제시하고, 콘크리트의 단면 내 수화도와 온도 및 습도분포를 결정하는 3차원 유한요소 해석 프로그램을 개발하였다. 개발된 해석프로그램을 이용한 수치해석 결과는 실험결과와의 비교를 통하여 그 타당성을 검증하였다.

• 한국철도학회논문집
• /
• 제20권5호
• /
• pp.625-636
• /
• 2017

본 연구는 프리캐스트 콘크리트궤도의 온도 변화에 따른 거동과 초기 변형 특성을 규명하고, 궤도 슬래브의 초기 변형과 온도 경사에 의한 변형이 열차하중에 의한 슬래브의 응력 분포에 미치는 영향을 고찰하는 것을 목적으로 한다. 본 논문은 2개의 논문 중 첫 번째 논문으로 이 논문에서는 프리캐스트 콘크리트궤도의 변형과 응력을 계산할 수 있는 유한요소 해석모델을 제시하였으며, 현장에 부설된 프리캐스트 콘크리트궤도에서 측정한 온도 분포와 변위를 해석 결과와 비교하였다. 분석 결과에 따르면 초기 변형에 의해 슬래브는 항상 상방향 컬링(curl-up)이 있는 상태에 있고, 측정된 깊이별 온도를 입력으로 하여 구한 슬래브 수직 변위와 계측 변위를 비교하면 초기 변형에 상응하는 슬래브 상하부 온도차, 즉 유효 내재 온도차(EBITD)를 결정할 수 있으며, EBITD를 적절히 가정하면 해석 변위와 계측 변위가 잘 일치하는 것으로 나타났다.

• 대기
• /
• 제21권2호
• /
• pp.197-208
• /
• 2011

The objective of this study is to describe the short-range forecast system of the Korea Air Force (KAF) and to verificate its performace in 2009 summer. The KAF weather prediction model system, based on the Weather Research and Forecasting (WRF) model (i.e., the KAF-WRF), is configured with a parent domain overs East Asia and two nested domains with the finest horizontal grid size of 2 km. Each domain covers the Korean peninsula and South Korea, respectively. The model is integrated for 84 hour 4 times a day with the initial and boundary conditions from National Centers for Environmental Prediction (NCEP) Global Forecast System (GFS) data. A quantitative verification system is constructed for the East Asia and Korean peninsula domains. Verification variables for the East Asia domain are 500 hPa temperature, wind and geopotential height fields, and the skill score is calculated using the difference between the analysis data from the NCEP GFS model and the forecast data of the KAF-WRF model results. Accuracy of precipitation for the Korean penisula domain is examined using the contingency table that is made of the KAF-WRF model results and the KMA (Korea Meteorological Administraion) AWS (Automatic Weather Station) data. Using the verification system, the operational model and parallel model with updated version of the WRF model and improved physics process are quantitatively evaluated for the 2009 summer. Over the East Aisa region, the parallel experimental model shows the better performance than the operation model. Errors of the experimental model in 500 hPa geopotential height near the Tibetan plateau are smaller than errors in the operational model. Over the Korean peninsula, verification of precipitation prediction skills shows that the performance of the operational model is better than that of the experimental one in simulating light precipitation. However, performance of experimental one is generally better than that of operational one, in prediction.

• 한국식품영양학회지
• /
• 제30권2호
• /
• pp.319-325
• /
• 2017

본 연구에서는 상업적으로 가장 많이 쓰는 커피 추출기인 2단계 퍼콜레이터를 사용하여 인스턴트커피를 제조하기 위한 커피추출조건을 최적화하였다. 반응표면분석을 위한 수학적 모델식을 구하기 위해 중심합성계획법이 사용되었고, 구해진 모델식에서는 커피추출액의 추출 수율과 추출액의 전반적인 기호도가 3가지 요인(추출기의 급수온도, 추출배수, 추출시간)의 2차식으로 표현되었다. 반응표면분석의 결과를 바탕으로 40% 이상의 수율을 보이는 범위에서, 추출수율과 전반적인 기호도를 최대로 하는 최적 커피 추출 조건은 급수온도 $163^{\circ}C$, 추출배수 4.3 및 추출시간 27분이었다. 이 결과는 산업에서 경쟁력 있는 인스턴트 커피 제조를 위한 커피 추출 조건에 대한 기초 자료를 제공한다.

• 한국농공학회논문집
• /
• 제51권6호
• /
• pp.45-52
• /
• 2009

This study was conducted in the process that the basic plan of the formation of the thermal energy complex in the Iwon reclaimed land of Taean was being made. Targeting for the large-sized greenhouse to be made in this area, it examined the cooling and heating load and the amount of ventilation, and also analyzed the economic efficiency of heating. The research results are as per the below: The minimum ambient temperature of this area was measured on January 7, 2001, which was $-18.7^{\circ}C$, and the maximum ambient temperature of this area was measured on July 24, 1994, which was $36.7^{\circ}C$. The maximum heating load was 39,011 MJ/h, but the date when the maximum heating load was not consistent with the date when the minimum temperature was measured. The maximum cooling load was 88,562MJ/h, It was approximately 2.3 times of the maximum heating load, which was measured at 14:00 hours on September 4, 2000. The maximum amount of ventilation heat was 138,639MJ/h. Assuming the rate of solar heat use as 10%, 20%, 50%, and 100%, the total sum of cost-benefit would be ￦-193,450,000, ￦-634,930,000, ￦-3,372,960,000, and ￦-9,850,420,000, respectively 20 years later. The break-even point of the geothermal heat pump would be about 4 years for 10% use, about 3 years for 20% or 50% use, and approximately 6 years for 100% use. It was found that 50% use would be most advantageous. In case two systems are combined, the break-even point will be 10 years, 8 years, and 11 years respectively.

• Journal of Microbiology and Biotechnology
• /
• 제17권11호
• /
• pp.1751-1757
• /
• 2007

Elastin-like polypeptides (ELPs) undergo a reversible inverse phase transition upon a change in temperature. This thermally triggered phase transition allows for a simple and rapid means of purifying a fusion protein. Recovery of ELPs-tagged fusion protein was easily achieved by aggregation, triggered either by raising temperature or by adding salt. In this study, levansucrase has been used as a model enzyme in the development of a simple one-step purification method using ELPs. The levansucrase gene cloned from Pseudomonas aurantiaca S-4380 was tagged with various sizes of ELPs to functionally express and optimize the purification of levansucrase. One of two ELPs, ELP[V-20] or ELP[V-40], was fused at the C-terminus of the levansucrase gene. A levansucrase-ELP fusion protein was expressed in Escherichia coli $DH5{\alpha}$ at $37^{\circ}C$ for 18 h. The molecular masses of levansucrase-ELP[V-20] and levansucrase-ELP[V-40] were determined as 56 kDa and 65 kDa, respectively. The phase transition of levansucrase-ELP[V-20] occurred at $20^{\circ}C$ in 50 mM Tris-Cl (pH 8) buffer with 3 M NaCl added, whereas the phase transition temperature ($T_t$) of levansucrase-ELP[V-40] was $17^{\circ}C$ with 2 M NaCl. Levansucrase was successfully purified using the phase transition characteristics of ELPs, with a recovery yield of higher than 80%, as verified by SDS-PAGE. The specific activity was measured spectrophotometrically to be 173 U/mg and 171 U/mg for levansucrase-ELP[V-20] and levansucrase-ELP[V-40], respectively, implying that the ELP-tagging system provides an efficient one-step separation method for protein purification.

• 유기물자원화
• /
• 제3권2호
• /
• pp.59-68
• /
• 1995

퇴비화 시설은 공기량과 수분 조절만으로 운전되기 때문에 2개의 운전인자의 영향을 분석하기 위하여 수분을 첨가하는 경우와 첨가하지 않는 경우에 대하여 공기량을 변화시켜 모델링하였다. 또한 최적의 퇴비화 환경이 조성될지라도 발열량 및 분해속도에 따라 퇴비화 시설의 운전온도를 달리하여야 하므로, 고속분해 단계와 완속분해 단계의 운전온도를 변화시켜 모델링함으로써 퇴비화 공정에 대한 영향을 분석하였다. 한편 모델은 미국 Roger T. Haug Inc 에서 개발한 "The Library of Compost Engineering Software" 를 사용하였다. 결과적으로 적정 함수율의 퇴비화 시설 운전이 공기량 변화에 대하여 운전온도의 변화가 민감하며, 수분이 부족한 경우에 비하여 오히려 적은 공기량으로 높은 반응율을 달성하게 된다. 완속분해 단계의 효과적인 운전이 전 공정의 분해율을 높일 수 있으므로 완속분해 물질의 분해에 촛점을 맞추어 단계별 운전온도를 설정하여야 함을 알 수 있었다.

• 천문학회보
• /
• 제39권2호
• /
• pp.108.1-108.1
• /
• 2014

Near-infrared Imaging Spectrometer for Star formation history (NISS), one of the main payloads of NEXTSat-1, is being developed by Korea Astronomy & Space Science Institute (KASI). Since NISS adopts an infrared reflecting optical system, its performance is highly sensitive to changes in system temperature. Therefore, it is important to figure out the temperature through thermal analysis and cooling tests in order to optimize the optical system design. We conducted thermal analysis of NISS for the recently updated model, and obtained steady state temperature of the optical system for two cases of satellite attitude: about 190 K for the Normal case and about 210 K for the Hot case. In this paper, we present thermal design of NISS and the preliminary thermal analysis results.

• 대한인간공학회지
• /
• 제17권3호
• /
• pp.41-59
• /
• 1998

Thermal comfort aspect of a locally-cooled target space in warm and humid environments(typically in the rainy summer season) was studied in view of PPD index. First. theoretical analyses were conducted to examine the effect of the governing parameters(such as air temperature, relative humidity and air velocity, etc.) using a computer model. Secondly, experimental investigations were also performed in a climatic room designed to simulate corresponding thermal conditions of outdoor environments. During the tests, temporal variation of PPD was recorded as functions of climatic variables(outdoor and indoor temperatures, relative humidity and air velocity) for the given human factors(metabolic heat generation and clothing). From both theoretical and experimental investigations, air temperature and air velocity were found to be the most dominant parameters affecting PPD of the target space. Results were summarized as: 1. Relative humidity of the locally-cooled target space tends to approach that of outdoor's as the space is subjected to an ON-OFF mode of cooling, since moisture potential of the two rooms reaches an equalized state as a result of moisture diffusion. 2. It was recognized that changes in relative humidity did not show any significance in view of thermal comfort as was reported in the previous studies, while variations of both temperature and air velocity caused relatively large changes in the degree of thermal comfort. 3. In-door environment should be evaluated in terms of PPD instead of relative humidity commonly recognized as an important climatic variable particularly in warm and humid environments.

• 한국환경과학회지
• /
• 제26권12호
• /
• pp.1307-1319
• /
• 2017

In this study, we investigated the impact of different initial data on atmospheric modeling results using the Weather Research and Forecast (WRF) model. Four WRF simulations were conducted with different initialization in March 2015, which showed the highest monthly mean $PM_{10}$ concentration in the recent ten years (2006-2015). The results of WRF simulations using NCEP-FNL and ERA-Interim were compared with observed surface temperature and wind speed data, and the difference of grid nudging effect on WRF simulation between the two data were also analyzed. The FNL simulation showed better accuracy in the simulated temperature and wind speed than the Interim simulation, and the difference was clear in the coastal area. The grid nudging effect on the Interim simulation was larger than that of the FNL simulation. Despite of the higher spatial resolution of ERA-Interim data compared to NCEP-FNL data, the Interim simulation showed slightly worse accuracy than those of the FNL simulation. It was due to uncertainties associated with the Sea Surface Temperature (SST) field in the ERA-Interim data. The results from the Interim simulation with different SST data showed significantly improved accuracy than the standard Interim simulation. It means that the SST field in the ERA-Interim data need to be optimized for the better WRF simulation. In conclusion, although the WRF simulation with ERA-Interim data does not show reasonable accuracy compared to those with NCEP-FNL data, it would be able to be Improved by optimizing the SST variable.