• Proceedings of the KSR Conference
• /
• 2001.05a
• /
• pp.424-430
• /
• 2001

현대건설(주)는 사업 주관사로서 해외 업체와 대만고속전철 턴키 공사를 2000 년 1 월에 공동으로 수주하였다. 고속전철의 총 연장 길이는 약 326 km 이며, 정거장 10 개소, Depot 및 야적장으로 구성되어 있다. 이번에 수주한 공구는 2 개의 연속된 공구 (C230, C240) 이며, 본 논문은 총 연장 23.6km 인 C230 공구에 대한 설계 과정을 수록하였다. C230 공구는 NATM 터널 (6.2km), Cut-and-Cover 터널 (0.5km), 교량 (7.8km) 및 토공 구간 (9.1km)으로 구성되어 있다. 전 구간의 지반조건은 "매우" 취약한 매질로 구성되어 있으며, 층리나 절리는 거의 발달되어 있지 않다. 따라서 화약발파에 의한 터널 굴착은 기계식 굴착 (Back-hoe Excavation) 방법에 비하여 현실성이 없는 것으로 분석되었다. 취약한 지반에서 계측 결과를 기준으로 굴착 공간을 안전하게 유지할 수 있는 NATM 보강 설계가 현지 암반조건에 가장 이상적인 방법으로 제시되었다. 특히, NAT설계는 대형 아파트 지역과 파쇄대 및 지하수 침투 예상지역을 통과하기 위하여 계측에 의한 Feed-back 과정을 탄력적으로 적용하도록 계획하였다.

• Proceedings of the KSR Conference
• /
• 2004.10a
• /
• pp.971-976
• /
• 2004

The management of railroad structures is more difficult and complicate because there are many structures such as rail, bridge, tunnel, station, and so on. Therefore, LCC(Life Cycle Cost) analysis of railroad structures as public infrastructure must contain a maintenance cost as well as an initial cost in order to make a more effective management during the life cycle on the design phase. This paper presents a cost classification scheme considering user costs such as value of delayed time of passenger and freight. Also, in this study it is developed a probabilistic life cycle cost(PLCC) analysis model of railroad structures taking into account uncertainties and variations of input variables in order to analyze LCC. It may be stated that the model proposed in this study can greatly contribute to the making optimal decision, the estimate of the maintenance cost and the allocate of budget in the project of railroad structures.

• Proceedings of the Korea Society for Simulation Conference
• /
• 2005.11a
• /
• pp.138-143
• /
• 2005

In order to reduce traffic accident, the interaction between drivers and roads should be studied in drivers' behaviour standpoints, and then this must be applied to the establishment of the road design standard. The K-ROADS(KICT-Road Analysis Driving Simulator) was developed to analyze and evaluate the road safety at the project HuRoSAS(Human & Road Safety Analysis System), since 2003. This has two distinct functions. One is the visual system which has 360 degree F.O.V. to reduce a dead angle on black spots as at-grade intersection. The other is the motion system which reproduce high frequency vibration made in irregular road surface and vehicle's motion. The K-ROADS has been used the study on the effect of alternatives of speed hump, and the study on the interior wall design of long tunnel to safety standpoints.

• Tunnel and Underground Space
• /
• v.12 no.2
• /
• pp.71-83
• /
• 2002

본 기술보고에서는 미국의 고준위 방사성폐기물 발생 현황 및 최근 에너지성 장관의 최종 추천을 받는 등 활발하게 진행되고 있는 미국 유카산 고준위 방사성폐기물 처분장 후보 부지 선정 과정 및 조사 연구 현황을 요약하였다. 본 기술보고에 요약한 바와 같이 유카산 프로젝트의 자연 환경은 우리 나라와는 매우 상이하다. 그러나 세계 원자력 계에서의 미국의 영향력을 고려할 때 유카산 프로젝트의 성공은 2001년 핀란드 올킬루오토(Olkiluoto) 처분 부지 확보와 함께 원자력 계의 오랜 숙원이었던 고준위 방사성폐기물 처분을 실현시킴으로서 향후 원자력 에너지 사용의 증대와 함께 심부 지질에 대한 이해를 증진시키는데 크게 기여할 것이다.

• International Journal of High-Rise Buildings
• /
• v.11 no.1
• /
• pp.61-68
• /
• 2022

The Address Jumeirah Resort is a mixed-use 77-story tower reaching a height of 301 meters with a slenderness ratio of 13.5:1. The development is situated in the Jumeirah Beach District and accommodates 217 key five-star hotel suites, 478 residential apartments, 444 serviced-branded apartments, retail shops, ballrooms and entertainment facilities around the premises. The building has over 242,000 m2 of usable area. The project is an award-winning development that broke multiple Guinness records. The focus of the paper is to present the challenges faced in the structural design and construction of the super tall tower and the highest occupiable skybridge in the world.

• Geotechnical Engineering
• /
• v.14 no.6
• /
• pp.17-32
• /
• 1998

The Bakun hydroelectric project includes the construction of a hydroelectric power plant with an installed capacity of 2,520MW and a power transmission system connecting to the existing transmission networks in Sarawak and Western Malaysia, The power station will consist of a 210m height concrete faced rockfill dam. During the construction of the dam and the power facilities the Balui river has to be diverted by three diversion tunnels with a length of some 1,400m each. The inner diameter of the tunnels is 12m and the tunnel width is 16m at the portal area. This paper describes the stability analysis and design methods for the open cut rock slopes in the inlet and outlet area of the diversion tunnels. The geotechnical parameters employed in stability calculations were given as a function of four. defined Rock Mass Types (RMT) which were based on RMR system from Bieniawski. The stability calculations procedure of the rock slopes are divided into two stages. In the first stage, it is calculated for the stability of each 'global' slope without any rock support and shotcrete system. In the second stage, it is calculated for each 'local'slope stability with berms and supported with rock bolts and shotcrete. The monitoring instrumentation was performed continuously and some of the design modification was carried out in order to increase the safety of failed area based on the unforeseen geological risks during the open cut excavation.

• Explosives and Blasting
• /
• v.30 no.1
• /
• pp.37-51
• /
• 2012

In this case of "Seongnam~Yeoju double-lanes railroad construction", there were safety facilities which were concerned about damages from vibration and noise. In the project design stage, the rock-splitter method was designed to prevent them. The electronic blasting was considered to improve construction speed and economic value as an alternative tunnelling method, complying with the site's vibration criteria(cowhouse : 0.09cm/sec, residence : 0.2cm/sec). In the environment evaluation report of the eDev, tunnel electronic blasting systems, the blasting pollutions can be managed by the electronic blasting method. The results were successfully conducted with high speed construction without any damages to adjacent facilities.

• The Journal of the Korea Contents Association
• /
• v.12 no.7
• /
• pp.114-122
• /
• 2012

Local company which has excellent patent technique is required design development for sales growth and enhancement of market competitiveness. For the solution about this requirement of small and medium company, the patent office and Chooncheognbukdo are jointly progressing the value consideration business of local design, and the design is improved through this. This study is to show the illustration of the design developed by business process of V company for 'the development of external design of LED LAMP fitted into the environment in tunnel' as a project ordered by S company, and the improvement patent was created with simulation development in considering design recognition of supporting company and the competitiveness of the product by successful performance of the external design development based on patent technique. Through the effective change method of LED LAMP in tunnel and the suggested result of LED LAMP reflection method, the beneficiary company has progressed the corporate body from the individual business, and at present the primary product was completed by securing manufacturing basis facilities for manufacturing and sales. Local small and medium company became a strong design company by connecting design development supporting business through the supporting method of the fusion of design and patent.

• Journal of KIBIM
• /
• v.1 no.1
• /
• pp.6-12
• /
• 2011

BIM(Building Information Modeling) technologies are the most effective for the maintenance of infrastructures because they provide information sharing througout the life-cycle of structures and support close communication between different project stages. Systematic and well-organized data play a fundamental role for the effective maintenance of subway tunnel. In this paper, 3D information models for maintenance of BIM-based subway tunnel structures are developed. Standard classifications for the maintenance and construction information classification system were adopted. A classification system based on construction information classification system was built considering procedures of maintenance work. It provides optimization and standardization of the work flow for the maintenance of subway structures by applying information modeling processes instead of the current maintenance practices. It can effectively reduces the life cycle cost and time for the maintenance. The proposed system can be utilized for the maintenance history management to enhance current maintenance system.

• ETRI Journal
• /
• v.40 no.1
• /
• pp.39-50
• /
• 2018

More people prefer using rail traffic for travel or for commuting owing to its convenience and flexibility. The railway scenario has become an important communication scenario in the fifth generation era. The communication system should be designed to support high-data-rate demands with seamless connectivity at a high mobility. In this paper, the channel characteristics are studied and modeled for the railway tunnel scenario with straight and curved route shapes. On the basis of measurements using the "Mobile Hotspot Network" system, a three-dimensional ray tracer (RT) is calibrated and validated for the target scenarios. More channel characteristics are explored via RT simulations at 25.25 GHz with a 500-MHz bandwidth. The key channel parameters are extracted, provided, and incorporated into a 3rd-Generation-Partnership-Project-like stochastic channel generator. The necessary channel information can be practically realized, which can support the link-level and system-level design of the communication system in similar scenarios.