• Proceedings of the KSMRM Conference
• /
• 2003.10a
• /
• pp.45-45
• /
• 2003

To evaluate remodeling of infarcted myocardium with contrast-enhanced MRI (co-MRI) at true end-diastole (ED) MRI was performed with a Gyroscan Intera (1.5 Tesla, Philips, Netherlands) in 13 patients with acute subendocardial myocardial infarction. The First exam was done 0-15 days (mean 5.2days) after symptom onset and the second exam 28-88days (mean 49 days) after the first exam. Ce-MRI encompassing the entire left ventricle was performed with a multi-shot, turbo-field-echo, breath-hold sequence and a non-selective, inversion prepulse 10 minutes after the intravenous injection of Gd-DTPA at a dose of 0.2 mmol/kg body weight. To allow the long TD, ECG synchronization should use two RR-intervals for one acquisition of a segment of k-space by setting the heart rate to half that of the true heart rate. Trigger delay time (TD) was adjusted to the RR-interval for true end-diastolic imaging. The other typical parameters were TR=5.4ms, TE=1.6ms, voxel size=1.37${\times}$1.37${\times}$10mm, k-space data segmented into 8 segments with 32 lines of segment per two cycles over 16 cardiac circles. The thickness of hyperenhanced myocardium and epicardially nonenhanced myocardium were followed.

• Proceedings of the KSMRM Conference
• /
• 2003.10a
• /
• pp.92-92
• /
• 2003

To evaluate remodeling of infarcted myocardium with contrast-enhanced MRI (co-MRI) at true end-diastole (ED) MRI was performed with a Gyroscan Intera (1.5 Tesla, Philips, Netherlands) in 13 patients with acute subendocardial myocardial infarction. The First exam was done 0-15 days (mean 5.2days) after symptom onset and the second exam 28-88days (mean 49 days) after the first exam. Ce-MRI encompassing the entire left ventricle was peformed with a multi-shot, turbo-field-echo, breath-hold sequence and a non-selective, inversion prepulse 10 minutes after the intravenous injection of Gd-DTPA at a dose of 0.2 mmol/kg body weight. To allow the long TD, ECG synchronization should use two RR-intervals for one acquisition of a segment of k-space by setting the heart rate to half that of the true heart rate. Trigger delay time (TD) was adjusted to the RR-interval for true end-diastolic imaging. The other typical parameters were TR=5.4ms, TE=1.6ms, voxel size=1.37$\times$1.37$\times$10mm, k-space data segmented into 8 segments with 32 lines of segment per two cycles over 16 cardiac cycles. The thickness of hyperenhanced myocardium and epicardially nonenhanced myocardium were followed.

• Proceedings of the Optical Society of Korea Conference
• /
• 2003.02a
• /
• pp.320-321
• /
• 2003

위성통신 및 무선통신에서 안테나의 수신 감도를 향상시키기 위한 노력은 계속되어 왔다. 안테나의 지향성을 높이기 위하여 다수의 동형 단위 안테나들을 일정 방향으로 배열하여 안테나를 기계적으로 회전시키지 않고, 고정된 다수의 동형 단위 안테나들에서 방사되는 전파의 위상을 전자적으로 변화시켜 방사 빔을 주사하는 방법, 즉 위상배열 안테나(Phased Array Antenna)를 널리 사용하고 있다. 위상배열 안테나의 단위 안테나에서 방사되는 전파의 위상을 변화시키기 위해선 실시간 시간지연 시스템이 필요하다. (중략)

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.1654-1659
• /
• 2003

In this paper, the performance evaluation of the JADE-MUSIC estimation based on the indoor channel is presented. By means of the JADE-MUSIC algorithm, DOA and time delay can be obtained simultaneously. In the JADE-MUSIC method, the channel impulse response is first estimated from the received samples and then this impulse response is employed to estimate DOAs and time delays of multipath waves. Moreover, according to the JADE-MUSIC characteristics, it can work in cases when the number of impinging waves is more than the number of antenna elements, unlike the traditional parametric subspace-based method, such a case is not true. Therefore, we employ the JADE-MUSIC algorithm applying for the real indoor environment where is rich of the multipath propagation waves and can imply that the number of waves is very possibly higher than that of the array element. The experiment is carried out in our laboratory considered to be the real indoor environment. The performance of the JADE-MUSIC algorithm is evaluated in terms of the comparison between the simulation and experiment results by using the simulated channel model and the real indoor channel model, respectively. It is clear that the joint angle and delay estimation using the simulated channel model are in good agreement with the estimation using the real indoor channel model. Therefore, we can say that the JADE-MUSIC algorithm accomplishes the high performance to jointly estimate the angle and delay of the arriving signal for the indoor environment.

• The Korean Journal of Emergency Medical Services
• /
• v.16 no.1
• /
• pp.81-90
• /
• 2012

Objectives: This study is to research delay time comparison for later defibrillation after hands off according to the changes in defibrillation electrodes. Study purpose: In defibrillation treatment that is the only way for cardiac arrest by arrhythmia, it is to find defibrillator device which can minimize late defibrillation delay time after important affect of hands off. Study object and method: After hands off according to the defibrillator device, we collected total 40 people for emergency medicine doctor, internal medicine doctor, general surgeon, nurse, emergency medical technician who are working at 2 CN, CS University hospitals in Gwangju Jeollanamdo district to find out hand off shock interval(HOSI). We then researched their general properties like occupation sector, experiences in clinic, gender, completion of AHA ACLS-P training and more. Then 40 participants continued ventricular fibrillation cardiac arrest simulation training (using human-model mannequin) designed by researcher and performed their roles as defibrillation operator. Each of participant used manual paddle and performed 4 times of defibrillation (150J) during 8 minutes of CPR and in 8day, the defibrillator devices were replaced from manual paddle to self-adhesive electrodes pads and 4 times of defibrillation (150J) under same simulation condition as manual paddle were performed. Study result: In comparison for delay time of later defibrillation after hands off of manual paddle and self adhesive electrodes pad, the self adhesive electrodes pad ($7.0{\pm}0.5sec$) seemed to reduce delay time of later defibrillation significantly (p<0.05) compared to manual paddle ($10.0{\pm}0.9sec$). The self adhesive electrodes pad, according to the general properties of participants, had no particular change in delay time after later defibrillation for the statistics (p>0.05) but the manual paddle had statistically significant differences for the occupation sector, experiences in clinic and gender (p<0.05). Conclusion: In defibrillation, the self adhesive electrodes pad($7.0{\pm}0.5sec$) showed short HOSI compared to manual paddle ($10.0{\pm}0.9sec$) significantly (p<0.05) and it applied identically for both existence and non-existence of ACLS-P training completion, experiences in clinic, gender and occupation sector. The manual paddle had also significant difference in experiences in clinic and occupation sector (p<0.05). which means the effect on HOSI according to the job mastery. Therefore, if the clinic experience is short or in case for the occupations without frequent defibrillation treatment has a danger of lowering success rate for the defibrillation using manual paddle. Therefore, it is true that using self adhesive electrodes pad for defibrillation electrodes when performing manual defibrillation in pre-hospital as well as in-hospital steps can generally minimize delay time of later defibrillation after hands off.

• Proceedings of the KIEE Conference
• /
• 2007.04a
• /
• pp.246-248
• /
• 2007

This paper presents fast locking PLL(Phase Locked Loop) that can improve a jitter noise characteristics and acquisition process by designing a PFD(Phase Frequency Detector) circuit. The conventional PFD has not only a jitter noise caused from such a demerit of the wide dead zone and duty cycle, but also a long delay interval that makes a high speed operation unable. The advanced PFD circuit using the TSPC(True Single Phase Clocking) circuit is proposed, and it has excellent performances such as 1.75us of locking time and independent duty cycle characteristic. It is fabricated in a 0.018-${\mu}m$ CMOS process, and 1.8v supply voltage, and 25MHz of input oscillator frequency, and 800MHz of output frequency and is simulated by using ADE of Cadence.

• The Proceeding of the Korean Institute of Electromagnetic Engineering and Science
• /
• v.13 no.2
• /
• pp.33-43
• /
• 2002

현대의 레이다나 통신 시스템에 있어 위상 배열안테나는 필수 구성요소이고 이러한 위상 배열 안테나에는 수 천개의 독립적인 위상제어기가 사용되어지고 있다. 따라서 대량생산이 가능하면서도 성능이 우수한 저손실, 저가격의 True-Time Delay (TTD)를 지원하는 위상천이기가 크게 요구되고 있는 실정이다. 최근 몇 년 동안 MEMS 공정을 이용한 저손실 RF 스위칭 소자와 가변 캐패시터가 성공적으로 개발되었으며 이러한 저손실의 MEMS 스위칭 소자를 이용한 위상천이기 구현이 가능하게 되었다. 본 논문에서는 크기나 전력소모, 삽입손실 등에서 우수한 고주파 특성을 갖는 RF MEMS (Micro-Electro Mechanical System) 스위치에 대해서 간략히 언급하고 이를 이용한 위상천이기와 기존의 위상천이기를 비교 분석하였다.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.48 no.6
• /
• pp.728-734
• /
• 1999

An on-line system identification scheme of unknown system is proposed based on a Laguerre models representation. The unknown parameters are detemined using recursive least-square identification. The proposed method have the advantage that an unknown system can be modelled without structural knowledge and assumption about the true model order and time delay. Therefore, the proposed method can make the design procedure very when compared to widely-used conventional method.

• International Journal of Internet, Broadcasting and Communication
• /
• v.12 no.4
• /
• pp.93-101
• /
• 2020

Shipyards are potential environments for using IoT services, sensor networks, and delay tolerant networks. Simulations of those services and networks strongly rely on human mobility models. Results obtained with an unrealistic model may not reflect the true performance of applications, protocols, and algorithms in a shipyard. A lot of synthetic models for human movements have been studied but most of them are generic and focus on the daily movements of humans on city scales. Nevertheless, workers in shipyards have unique movement characteristics such as movement speed, pause time, and attractions places. For instance, workers usually move to some places, where they work, and rarely move to other places in the factory. Movement characteristics of workers not only depend on workers but also on tasks, which they do. For instance, workers, who paint ships, have similar movement speed and pause time. Hence, in this paper, human movements in shipyards are studied. We propose a new human mobility model called the human mobility mode in shipyards (MIS). In MIS, workers are classified into multiple types. Movement characteristics of a worker are similar to other workers in the same type. Based on the visiting probability, workers have some places, where they frequently visits, and some places, where they rarely visit. We analyze real mobility traces and studie to achieve human movement characteristics from real traces. The results show that MIS provides a well-match to the movement characteristic from real traces.

• Journal of Ship and Ocean Technology
• /
• v.8 no.3
• /
• pp.18-25
• /
• 2004

Sound reception system is required to detect the sound and the quadrantal direction of the other ship's horn sound, to overcome the effects of enclosed wall for navigation space, functioning as a sound barrier. However, the realized systems can only provide quadrantal information of the other ship. This paper presents a new arrangement of microphones, having geometrically symmetric deployment with the same distances between sensors and the same angles between adjacent sensors with respect to the geometrical center. The sound pressures received at microphones are transformed into the related envelope signals by applying Hilbert transform. The time delays between microphones are estimated by the correlation functions between the derived envelope signals. This envelope base processing mitigates the noises related to the reflection by ship and sea surface. Then, the directional information is easily defined by using the estimated time delays. The suggested method is verified by the generated signals using boundary element method for a small ship model with sea surface wave. The estimated direction is quite similar to the true one and therefore the proposed approach can be used as an efficient sound reception system.