• 제목/요약/키워드: Triple-band

검색결과 133건 처리시간 0.026초

Calibrating the stellar velocity dispersion in near-IR

  • 강월랑;우종학
    • 천문학회보
    • /
    • 제36권1호
    • /
    • pp.52.2-52.2
    • /
    • 2011
  • The correlation between black hole mass and galaxy stellar velocity dispersion gives an important clue on the black hole growth and galaxy evolution. In the case of AGN, however, it is extremely difficult to measure stellar velocity dispersions in the optical spectra since AGN continuum dilutes stellar absorption features. In contrast, stellar velocity dispersions of active galaxies can be measured in the near-IR, where AGN-to-star flux ratio is much smaller, particularly with the laser-guide-star adaptive optics. However, it is crucial to test whether the stellar velocity dispersion measured from the near-IR spectra is consistent with that measured from the optical spectra. Using the TripleSpec at the Palomar 5-m Telescope, we obtained high quality spectra ranging from 1 to 2.4 micron for a sample of 35 nearby galaxies, for which dynamical black hole masses and optical stellar velocity dispersion measurements are available, in order to calibrate the stellar velocity dispersion in the near-IR. In this poster, we present the initial results based on 10 galaxies, with the stellar velocity dispersion measured in the H-band.

  • PDF

반파장 로디드 라인 구조를 이용한 이동 통신 단말기용 다중 대역 내장형 안테나 설계 (Design of a Multi-band Internal Antenna Using Half Wavelength Loaded Line Structure for Mobile Handset Applications)

  • 신후광;정우재;정병운;박면주;이병제
    • 한국전자파학회논문지
    • /
    • 제16권12호
    • /
    • pp.1179-1185
    • /
    • 2005
  • 본 논문에서는 3중 대역 이상의 이동 통신 단말기를 위해 주파수 튜닝이 가능한 새로운 형태의 내장형 안테나를 제안하였다. 설계된 안테나의 동작 주파수 대역은 GSM(880${\~}$960 MHz)/GPS(1,575 $\pm$ 10 MHz)/DCS(1,710${\~}$1,880 MHz)/US-PCS(1,850${\~}$l,990 MHz)/W-CDMA(1,920${\~}$2,170 M/Hz) 대역을 포함한다. 제안된 안테나는 반파장 로디드 라인 구조와 모노폴 구조를 결합한 형태를 띄고 있으며 하나의 단락점과 급전점을 공유한다. 그리고 단락점과 접지면 사이의 집중형 인덕턴스 소자의 값을 조절함으로써 GSM과 GPS대역을 그대로 유지하면서 각각 DCS, US-PCS, W-CDMA대역을 만족시킬 수 있다. 사용된 인덕터 소자의 값은 주파수 튜닝에 따른 이득 저하를 최소화하기 위하여 최대 3.3 nH로 한정하였으며 이에 따른 안테나의 최대 이득은 GSM대역에서 -0.58${\~}$-0.30 dBi, GPS 대역에서 -0.57${\~}$0.43 dBi, DCS/US-PCS/W-CDMA 대역에서 0.38${\~}$l.15 dBi로 측정되었다. 시뮬레이션과 측정을 통해 제안된 안테나가 높은 주파수 대역에서 약 0.77 dB의 이득 변화 폭 내에서 약 240 MHz의 공진 주파수를 효과적으로 조절할 수 있음을 확인하였다.

WLAN/WiMAX 시스템 적용을 위한 DGS를 갖는 삼중대역 안테나 설계 및 제작 (A Design and Manufacture of Antenna with DGS(Defected Ground System) for WLAN/WiMAX system)

  • 서나현;이영철;윤중한
    • 한국정보통신학회논문지
    • /
    • 제21권4호
    • /
    • pp.679-687
    • /
    • 2017
  • 본 논문에서는 DGS (Defected Ground Structure)를 적용한 WLAN/WiMAX 시스템에 적용 가능한 모노폴 안테나를 제안하였다. 제안된 안테나는 마이크로스트립 급전을 바탕으로 두 개의 선로와 DGS를 갖도록 구성하여 삼중대역 특성을 갖도록 설계하였다. 두 개의 선로 그리고 세 개의 슬릿의 위치 및 길이와 DGS 위치와 길이를 적절한 조정하여 본 논문에서 요구되는 특성을 얻기 위한 최적화 수치를 얻었다. 제안된 안테나는 $34mm(W_1){\times}34mm(L_1){\times}1.6mm(t)$의 비유전율 4.4인 FR-4 유전체 기판 위에 $17.0mm(W_6){\times}30.75mm(L_3+L_4+L_9)$의 크기로 제작되었다. 제작 및 측정결과로부터 -10 dB 임피던스 대역폭을 기준으로 360 MHz (2.335~2.695 GHz), 645 MHz (3.37~4.015 GHz) 그리고 1,770 MHz (5.14~6.91 GHz)의 대역폭을 얻었다. 또한 제안된 안테나는 요구되는 삼중대역에서 측정된 이득과 방사패턴의 얻었다.

결합계수 및 주파수 튜너블 다중대역 내장형 안테나에 관한 연구 (A Study on Coupling Coefficient and Resonant Frquency tunable Multi-band Internal Antenna)

  • 이문우;이상현
    • 한국컴퓨터정보학회논문지
    • /
    • 제15권8호
    • /
    • pp.59-66
    • /
    • 2010
  • 본 논문은 안테나 구조체의 물리적 변화없이 안테나의 단락점에 연결되어있는 인덕터 값에 따라 급전점과 단락점 사이의 결합계수 뿐 아니라 안테나의 공진 주파수를 조절할 수 있는 이동통신용 안테나를 구현하였다. 설계된 안테나는 3중 대역 이상의 주파수 조절이 가능하고 동작 주파수 대역은 GSM(880~960MHz), GPS(1575MHz), DCS(1710~1800MHz), US-PCS(1850~1990MHz), WCDMA(1920~2170MHz) 대역을 포함한다. 제작된 안테나는 반파장 로디드 라인 안테나와 PIFA 구조를 결합한 형태이고 두 개의 단란점과 하나의 급전점을 공유한다. 두 개의 단락점 각각에 인덕터를 추가하여 하나의 인덕터는 급전점과 단락점 사이의 결합계수를 조절하고 다른 하나의 인덕터는 높은 주파수 대역의 공진 주파수를 조절한다. 안테나의 입력 임피던스 조절을 위한 인덕턴스의 범위는 0nH ~ 6.8nH 이고 이득의 변화는 GSM 대역에서는 0.15dBi, GPS 대역에서는 0.73dBi, WCDMA 대역에서는 0.29dBi 이내이다. 또한 공진 주파수 조절을 위한 인덕턴스의 범위는 0nH ~ 4.7nH의 범위에서 1640~2500 MHz (VSWR 3:1 기준)이고 이득의 변화는 GSM 대역에서는 0.46dBi, GPS 대역에서는 0.53dBi, DCS/US-PCS/WCDMA 대역에서는 0.59dBi 이내이다.

Polarimetry of solar system small bodies using the Seoul National University 61cm telescope and TRIPOL

  • Jin, Sunho;Ishiguro, Masateru;Kwon, Yuna Grace;Geem, Jooyeon;Bach, Yoonsoo P.;Seo, Jinguk;Sasago, Hiroshi;Sato, Shuji
    • 천문학회보
    • /
    • 제44권1호
    • /
    • pp.64.2-64.2
    • /
    • 2019
  • It is known that lights scattered by comets and asteroids are partially polarized. From polarimetric observations of those objects, we can investigate physical properties, such as albedos, sizes of cometary dust particles and regolith of asteroids. Since the polarization degrees of those objects highly depend on their phase angles (Sun-object-observer's angles), long-term monitoring observations are required. Moreover, comets show unforeseeable activations (i.e., outbursts) which need follow-up observations to understand the mechanism. In order to realize such monitoring and transient observations, we installed the Triple-Range Imager and POLarimeter (TRIPOL) on the 61cm telescope of Seoul National University (Hereafter, SNU) Gwanak campus. With this combination, we can obtain g', r', i' bands photopolarimetric images simultaneously with $8.0^{\prime}{\times}8.0^{\prime}$ field of view and pixel resolution of 0.94" pixel-1. Here, we make a presentation regarding the photometric and polarimetric performances of TRIPOL on the SNU 61cm telescope. In addition, we introduce initial polarimetric results of asteroid and comets with the instruments. First, we determine the limiting magnitudes (defined as magnitudes for S/N=5) of $15.17{\pm}0.06$ (g'-band), $15.68{\pm}0.01$ (r'-band), $16.24{\pm}0.03$ (I'-band), respectively, with total 240-seconds exposure (four 60-seconds exposure images, each was taken at different rotation angle for the half-wave plate). Second, we found that the instrumental polarization is negligibly small, ($-0.32{\pm}0.04%$ in the g', $-0.36{\pm}0.05%$ in the r' and $-0.21{\pm}0.04%$ in the i'-bands), while the polarization efficiencies are large enough to maximize the performance (i.e., $97.52{\pm}0.03%$ in the g', $98.83{\pm}0.02%$ in the r' and $99.15{\pm}0.02%$ in the i'-bands). With the instruments, we made observations of three Jupiter-family comets, 21P/Giacobini-Zinner, 38P/Stephan-Oterma, and 46P/Wirtanen and plan to observe one near-Earth asteroid, (433) Eros, on a trial basis. Especially for comets, we discriminate signals from dust and gas to eliminate gas contamination, which are known to change observed degree of linear polarization, using multi-band images. We confirm that the phase angle dependency of these comets are consistent with previous observations, probably because polarimetric property of Jupiter-family comets are broadly homogeneous unlike asteroids. We will also describe future observation plans using TRIPOL and SNU 61cm telescope.

  • PDF

유비쿼터스 환경에 적합한 소형 칩 안테나 구현 (Implementation of Mini Chip Antenna suitable for Ubiquitous Environment)

  • 강정진;최종인;이영대;홍유식
    • 한국인터넷방송통신학회논문지
    • /
    • 제8권3호
    • /
    • pp.81-86
    • /
    • 2008
  • 정보통신 패러다임은 전파를 기반으로 하는 유비쿼터스 환경으로 급변하고 있으며, 무선 유비쿼터스 통신을 가능케하는 안테나 기술은 눈부시게 발전하고 있다. 소형 칩 안테나는 외장형 AP(Access Point) 안테나와 달리 작은 카드에 내장된다. 수요 가격 특성의 문제 등 종합적으로 고려했을 때, 세라믹의 상대 유전율은 9.8, 두께는 3.5mm와 5mm를 사용하였다. 설계 제작된 WLAN(Wireless Local Area Network)용 안테나는 2.4~2.5GHz & 4.9~5.85GHz의 광대역 특성을 가지며, 안테나는 IEEE 802.11.a,g 그리고 b까지 트리플 모드로 사용할 수 있으며, 전 주파수 대역에서 비교적 일정한 성능을 갖는다.

  • PDF

초기 미세조직에 따른 저온 초전도 모노선재의 임계전류밀도 분석 (Effect of the Initial Microstructure of Low Temperature Superconducting Monowire on Critical Current Density)

  • 김희락;오영석;김세종;이호원;김지훈;강성훈
    • 소성∙가공
    • /
    • 제29권1호
    • /
    • pp.37-43
    • /
    • 2020
  • Increasing the critical current density of superconducting wire is one of the difficult challenges in the field of superconductivity. It is well known that the higher volume fraction of uniformly dispersed α-Ti is able to enhance the critical current density of superconducting material NbTi because α-Ti serves as a flux pinning center. The volume fraction of α-Ti highly depends on the grain size of NbTi because α-Ti precipitates at the grain boundaries or triple points. For this purpose, we investigated the effect of initial microstructures of NbTi obtained from hot rolling in various temperature conditions on the critical current density. In addition, subsequent heat treatment was assigned to precipitate α-Ti and groove rolling/cold drawing was adopted to produce a wire with a diameter of about 1.0 mm. It was observed that the band structure was formed after hot rolling at 500~600℃. It was also found that the volume fraction of α-Ti after hot rolling at 500~600℃ was higher and it led to the highest critical current density.

A Class of Bilateral Generating Functions for the Jacobi Polynomial

  • SRIVASTAVA, H M.
    • 대한수학회지
    • /
    • 제8권1호
    • /
    • pp.25-30
    • /
    • 1971
  • Put ($$^*$$) $$G[x,y]={\sum}\limits^{p+q=n}_{p,q=0}[-n]_{p+q}c_{p,q}x^py^q$$, where $[{\lambda}]_m$ is the Pocbhammer symbol and the $c_{p,q}$ are arbitrary constants. Making use of the specialized forms of some of his earlier results (see [8] and [9] the author derives here bilateral generating functions of the type ($$^{**}$$) $${\sum}\limits^{\infty}_{n=0}{\frac{[\lambda]_n}{n!}}_2F_1[\array{{\rho}-n,\;{\alpha};\\{\lambda}+{\rho};}x]\;G[y,z]t^n$$ where ${\alpha}$, ${\rho}$ and ${\lambda}$ are arbitrary complex numbers. In particular, it is shown that when G[y, z] is a double hypergeometric polynomial, the right-band member of ($^{**}$) belongs to a class of general triple hypergeometric functions introduced by the author [7]. An interesting special case of ($^{**}$) when ${\rho}=-m,\;m$ being a nonnegative integer, yields a class of bilateral generating functions for the Jacobi polynomials $\{P_n{^{{\alpha},{\beta}}}(x)\}$ in the form ($$^{***}$$) $${\sum\limits^{\infty}_{n=0}}\(\array{m+n\\n}\)P{^{({\alpha}-n,{\beta}-n)}_{m+n}(x)\;G[y,z]{\frac{t^n}{n!}}$$, which provides a unification of several known results. Further extensions of ($^{**}$) and ($^{***}$) with G[y, z] replaced by an analogous multiple sum $H\[y_1,{\cdots},y_m\]$ are also discussed.

  • PDF

Defining the $M_{BH}-sigma_*$ relation using the uniformly measured stellar velocity dispersions in the near-IR

  • 강월랑;우종학
    • 천문학회보
    • /
    • 제36권2호
    • /
    • pp.62.2-62.2
    • /
    • 2011
  • The correlation between black hole mass and stellar velocity dispersion provides an important clue on the black hole growth and galaxy evolution. In the case of AGN, however, it is extremely difficult to measure stellar velocity dispersions in the optical since AGN continuum dilutes stellar absorption features. In contrast, stellar velocity dispersions of active galaxies can be measured in the near-IR, where AGN-to-star flux ratio is much smaller. Expecting that more stellar velocity dispersion measurements will be available using future near-IR facilities, it is crucial to test whether the stellar velocity dispersions measured from the near-IR spectra are consistent with those measured from the optical spectra. For a sample of 35 nearby galaxies, for which optical stellar velocity dispersion measurements and dynamical black hole masses are available, we obtained high quality H-band spectra, using the TripleSpec at the Palomar 5-m Telescope, in order to calibrate the stellar velocity dispersions and define the $M_{BH}-sigma_*$ relation in the near-IR. Based on the spatially resolved kinematics, we correct for the rotation component and determine the luminosity-weighted stellar velocity dispersion of the spheroid component in each galaxy. In this presentation, we will show the comparison between optical and near-IR stellar velocity dispersion measurements and define the $M_{BH}-sigma_*$ relation based on uniformly measured stellar velocity dispersion in the near-IR.

  • PDF

Properties of Conformal Antenna for Mobile Phone by Laser Direct Structuring

  • Park, Sang-Hoon;Kim, Gi-Ho;Jeon, Yong-Seung;Na, Ha-Sun;Seong, Won-Mo
    • Transactions on Electrical and Electronic Materials
    • /
    • 제8권6호
    • /
    • pp.246-249
    • /
    • 2007
  • A triple-band antenna was developed and fabricated by LDS(Laser Direct Structuring) process. The effects of the plating rate and heat treatment condition were investigated and the gains of fabricated antennas were measured at various frequencies. The laser irradiated surface shows clearly that there are prominence and depression. It shows anchoring effect between a plating material and ablation surface. The plating rate was decreased when the plating material is exhausted in the solution. This solution needs to refreshed by the new aid solution. The copper plating thickness is decreased with the increase of heat treatment temperature in the same time but it does not change other condition. The gain of LDS antenna showed higher than the generally processed antenna. This result was related with practical use of the dimension and effective dielectric constant.