• Molecules and Cells
• /
• 제39권10호
• /
• pp.715-721
• /
• 2016

Plants have become physiologically adapted to a seasonally shifting environment by evolving many sensory mechanisms. Seasonal flowering is a good example of adaptation to local environmental demands and is crucial for maximizing reproductive fitness. Photoperiod and temperature are major environmental stimuli that control flowering through expression of a floral inducer, FLOWERING LOCUS T (FT) protein. Recent discoveries made using the model plant Arabidopsis thaliana have shown that the functions of photoreceptors are essential for the timing of FT gene induction, via modulation of the transcriptional activator CONSTANS (CO) at transcriptional and post-translational levels in response to seasonal variations. The activation of FT transcription by the fine-tuned CO protein enables plants to switch from vegetative growth to flowering under inductive environmental conditions. The present review briefly summarizes our current understanding of the molecular mechanisms by which the information of environmental stimuli is sensed and transduced to trigger FT induction in leaves.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.12-14
• /
• 2001

This paper deals with the fabrication and characteristic experiment of a high-Tc superconducting (HTSC) power supply using by Hi-2223 tape. The purpose of this research is to apply real HTSC load. This system consists of two heaters, an electromagnet, a Bi-2223 solenoid and a Bi-2223 pancake load. In the experiment, 17sec and 8.5sec were used for pumping period. Mechanism of the superconducting switch is used for heater-trigger. In experiment, the pumping-current has reached about 1.2A.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 E
• /
• pp.1693-1695
• /
• 1998

콘덴서에 고압으로 축적된 에너지를 부하로 전달해주는 스위칭기술은 고전압 펄스 파워 분야에서 아주 필수적이다. 이러한 관점에서 볼 때, 트리거 갭 스위치는 흔히 연구실에서 용이하게 사용할 수 있고, 갭 간격을 조정함에 의해 방전전압을 가변할 수 있는 장점이 있다. 그러나, 트리거 갭 스위치는 트리거 방전없이 생기는 자가방전이 발생하거나 트리거 방전이 생겨도 주방전이 일어나지 않는 경우가 있다. 본 연구에서는 이러한 일반 트리거 갭의 단점을 보완하고 확실하게 동작하는 갭 스위치의 제작에 필요한 데이터 확보를 위해 Nd:YAG 레이저를 트리거 갭 스위치 음극에 조사해 전극사이의 거리 g와 압력에 따른 최소트리거전압 $V_{T.min}$의 특성을 파악하였다.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제55권12호
• /
• pp.511-517
• /
• 2006

The key issues in high power, high energy applications such as electromagnetic launchers include safety, reliability, flexibility, efficiency, compactness, and cost. To explore some of the issues, a control scheme for a large current wave-forming was designed, built and experimentally verified using a 2.4MJ pulse power system (PPS). The PPS was made up of eight capacitors bank unit, each containing six capacitors connected in parallel. Therefore there were 48 capacitors in total, with ratings of 22kV and 50kJ each. Each unit is charged through a charging switch that is operated by air pressure. For discharging each unit has a triggered vacuum switch (TVS) with ratings of 200kA and 250kV. Hence, flexibility of a large current wave-forming can be obtained by controlling the charging voltage and the discharging times. The whole control system includes a personal computer(PC), RS232 and RS485 pseudo converter, electric/optical signal converters and eight 80C196KC micro-controller based capacitor-bank module(CBM) controllers. Hence, the PC based controller can set the capacitor charging voltages and the TVS trigger timings of each CBM controller for the current wave-forming. It also monitors and records the system status data. We illustrated that our control scheme was able to generate the large current pulse flexibly and safely by experiments. The our control scheme minimize the use of optical cables without reducing EMI noise immunity and reliability, this is resulting in cost reduction. Also, the reliability was increased by isolating ground doubly, it reduced drastically the interference of the large voltage pulse induced by the large current pulse. This paper contains the complete control scheme and details of each subsystem unit.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 1999년도 제17회 학술발표회 논문개요집
• /
• pp.188-188
• /
• 1999

The embedded atom method (EAM) of Daw and Baskes as a semiempirical method, has been successfully applied to the fcc or nearly filled d-band transition metals due to its computational feasibility and its methodological simplicity. Then Baskes modified the EAM (MEAM) to include directional bonding and applied it to metals, semiconductors, and diatomic gases, all of which have different types of bondings. Here, we present a detailed study of the energetics of adsorption on the fcc(111) surfaces and binary system within the framework of MEAM. In adsorption on fcc(111) surfaces, there are two energetically favored sites, so called, fcc site and hcp site, which may trigger stacking fault in the growth of films and might switch growth mode between 3D growth and layer by layer growth. We scrutinized the role of the hcp sites, which would offer dynamic growth pathways although the dynamics are not yet clear within the limited experimental resolution. Featuring these transient motions in the atomic level should contribute to the understanding the growth mechanisms on fcc(111) surface. And we also applied MEAM for initial stage energetics at the Cr coverage of sub- monolayer on W(110). We hope that recently observed extraordinary growth behavior at the Cr coverage of 0.7 monolayer, self- organized nano-scale lines, can be resolved in this MEAM binary system calculation.

• Journal of Information Technology Applications and Management
• /
• 제11권3호
• /
• pp.1-21
• /
• 2004

To meet the needs of the information age, the Korean government has placed a high priority in building the IT -capable workforce. Though a sizable financial resource was committed in implementing the policy, its effectiveness was not examined yet. The policy for the workforce development should be assessed continuously so that any misdirections are detected and redressed. The present study addresses four potential problems that would not allow the government to switch from a quantity-based policy to a quality-based policy. These are ① Korean universities' labor supply chain. ② moral hazard problems. ③ financial capacity of students, ④ horizontal policy orientation. The paper also proposes solutions to the mentioned problems. The government should foster an environment in which provide the concerned parties(universities. private institutions. students. etc,) with incentives to participate actively and promote the market principle of labor supply and demand. Such an ex-ante approach is believed to improve the system's efficiency compared to the extant approach based on ex-post KPI figures. If the four issues are not redressed. the market failure is likely to occur. The government should not make direct involvement in developing manpower, but rather be a linchpin to pull all concerned parties together. By doing so. the government should be able to fill the gap among parties in the system. One government role would be like defining workforce categories and promoting their career paths. Such role will also trigger universities and private institutions to pursue differential strategies along the supply chain of a particular workforce type.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2002년도 가을 학술발표회 논문집
• /
• pp.330-337
• /
• 2002

The HANARO seismic monitoring system is classified as non-nuclear safety(NNS), seismic category I, and quality class T The seismic monitoring system installed at the instrument room consists of five field sensors and one monitoring cabinet. The field sensors are composed of three triaxial accelerometers which installed at base slab, free field and overhead crane support respectively, a seismic trigger and a seismic switch at base slab. The most parts of analog system except field sensors are not produced any more, the improvement of the system is to be needed. The analog system with magnetic tape recorder is not only out-of-date model but dependent upon foreign technology. So it is difficult to get the spare parts and the cost to buy them is increased. Therefore we have improved the analog seismic monitoring system into a new digital seismic monitoring analysis system(SMAS) except five field sensors. After the installation of the new SMAS, we have carried out the site acceptance test(SAT) to confirm the field functions. The results of SAT satisfy the requirements of the fabrication technical specification. This new SMAS is operating at HANARO instrument room to acquire and analyse the signal of earthquake.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2017년도 추계학술대회
• /
• pp.536-538
• /
• 2017

나로우주센터에서는 한국형우주발사체(KSLV-II)의 이륙순간 발사체 주요부분에 대한 초고화질(UHD) 고속영상 획득 및 영상분석을 위해서 발사대 주변과 발사대 타워에 초고화질 고속 디지털카메라 시스템을 설치할 계획이다. 본 논문에서 현재 나로우주센터에서 운용중인 고속 디지털카메라 시스템의 구성과 한국형우주발사체 발사임무 수행을 위한 초고화질(UHD) 고속 디지털카메라 시스템의 구성을 비교하여 기술하였다.

• 한국화재소방학회논문지
• /
• 제16권2호
• /
• pp.1-7
• /
• 2002

유도등은 일정한 조도를 가지고 상용전원에 의하여 항상 점등되어 있어야 함으로 전력소비 및 광원 교체등 경제적 손실과 관리상의 문제가 있게 된다. 본 논문은 이제까지 광원으로 사용하고 있던 형광등이나 백열전구 대신에 소비전력이 적은 고효율 발광다이오드를 사용하여 전력소비의 절감과, 점검시의 문제점을 개선하기 위해 원격제어가 가능한 새로운 유도등회로를 제안하고 실험한 것이다. 그 결과 원격제어 스위치에 의한 유도등 점검을 제어각의 범위에서 쉽게 제어할 수 있었으며 반응시간은 600〔$\mu$s〕로 매우 빠르게 동작하였다. 또한 출력 상승시간(Rise time)과 하강고시간(Fall time)은 최대 200〔ns〕로 예민하게 반응하였다. 광원으로 고효율 발광다이오드를 사용함으로 광원을 교체해야 하는등의 문제를 제거하였으며 전력소비를 감소시킬 수 있음을 확인하였다.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2005년도 춘계학술대회 논문집
• /
• pp.133-139
• /
• 2005

스마트 디지털 콤파스를 구현하기 위하여 고투자율 등방성 자기물질을 이용한 공진형 마그네토미터(RM)을 설계하였다. 코어에 감은 코일의 인덕턴스 L은 코어의 투자율 $\mu(H)$ 에 비례함을 이론적으로 정립하였고, L의 변화는 간단한 슈미트 트리거 회로를 이용하여 주파수로 획득할 수 있었다. 또한, 반도체 스위치를 이용함으로서 회로를 간단히 구성할 수 있고, 온도에 따른 드리프트와 작동점 이동 문제를 해결할 수 있었다. 자기코어는 Metglas사의 2705M이 최적임을 알았고, RM을 이용하여 측정한 값으로 선체영구자기 성분을 구할 수 있음을 확인하였다.