• Elastomers and Composites
• /
• 제57권3호
• /
• pp.114-120
• /
• 2022

The tensile properties of the extruded PC film were measured in the extrusion direction and perpendicular to the extrusion direction. The measured properties were the elastic modulus and Poisson's ratio at the glass transition temperature of PC. The measured orthotropic properties of the film were used for the computer simulation of vacuum forming. In this simulation, three mold shapes were tested: dome, trapezoid, and cubic, and the vacuum was applied between the mold surface and the heated film. The stress, strain, thickness, and stretch ratio distributions of the film in different mold shapes were observed and compared. The thermoforming simulation method used in this study and the obtained results, considering the determined orthotropic properties, can be applied to the thermoforming of various three-dimensional shapes.

• 한국멀티미디어학회논문지
• /
• 제25권5호
• /
• pp.670-675
• /
• 2022

This study proposes an improved binarization method to improve image recognition rate. The research goal is to minimize the information loss that occurs during the binarization process, and to transform the object of the original image that cannot be determined through the transformation process into an image that can be judged. The proposed method uses a stepwise segmentation method of an image and divides blocks using prime numbers. Also, within one block, a trapezoidal type of fuzzy is applied. The fuzzy trapezoid is binarized by dividing the brightness histogram area into three parts according to the degree of membership. As a result of the experiment, information loss was minimized in general images. In addition, it was found that the converted binarized image expressed the object better than the original image in the special image in which the brightness region was tilted to one side.

• 한국수학교육학회지시리즈B:순수및응용수학
• /
• 제31권3호
• /
• pp.311-324
• /
• 2024

This article presents the above and below bounds for Midpoint and Trapezoid types inequalities for 𝜓-Hilfer fractional integrals with the assistance of the functions whose second derivatives are bounded. We also possess some extensions and generalizations of Hermite-Hadamard inequalities via 𝜓-Hilfer fractional integrals with the aid of the functions that have the conditions that will said.

• Archives of Plastic Surgery
• /
• 제35권5호
• /
• pp.597-602
• /
• 2008

Purpose: Presently, silicone rubber is chosen most frequently for nasal augmentation. However, there is a possibility of extrusion with this material. Sometimes, noses are prone to be traumatized, and then silicone rubber has a possibility of deformity or deviation resulting in trauma. We experienced cases with complications and traumatic deformities after the augmentation rhinoplasty. Methods: A retrospective review was performed to determine the characteristics of the implanted nasal silicone prosthesis after trauma. The patients' data such as deviation of implant, shape of fracture, age and sex of the patient, time of treatment, operative methods were reviewed. From March 2001 to March 2008, this study was performed in 30 patients. The patients were 25 females and 5 males, from 24 to 60 years of age, with an average of 42. All patients had previous augmentation rhinoplasty with silicone implant. Results: All of the 30 patients were confirmed as deviation of silicone and nasal bone fractures in the facial bone CT scan. The most common cause of fracture was traffic accident. The classification of nasal trauma after augmentation was done by facial bone CT. Class I: Deviation of silicone without nasal bone fracture without extrusion(12 cases, 40%), Class II: Deviation of silicone without nasal bone fracture and with extrusion(4 cases, 13%), Class III: Deviation of silicone with nasal bone fracture and without extrusion(8 cases, 27%), Class IV: Deviation of silicone with nasal bone fracture and with extrusion(3 cases, 10%), Class V: Mild deviation of silicone with nasal bone fracture(3cases, 3%). Specially, the comminuted or trapezoid nasal fracture was confirmed in 11 cases(Class III, IV). Conclusion: The problems of silicone implant have generally been related to foreign body reactions, rigidity of the material, encapsulation, infections, and extrusion. We experienced 11 cases of comminuted or comminuted trapezoid shaped fracture below nasal implant. So, we think this phenomenon could be used in late problem of silicone implant.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제33권3호
• /
• pp.238-246
• /
• 2007

This study is aimed to elucidate the abnormal growth pattern of human fetal maxilla with cleft lip and palate (CLP). Total 71 fetal maxillae with CLP were obtained from aborted human fetuses. They were examined radiologically for the dimensional changes of maxillary trapezoid (MT) formed by maxillary primary growth centers (MxPGC)(Lee et al., 1992). In palatal radiogram of the CLP maxilla, the MT was traced by the anterior and posterior MxPGCs, and the dimensions of anterior and posterior maxillary widths, maxillary length, and MT length (MTL), and MT area were measured for evaluation of the basic growth pattern of the developing maxilla. The growth of anterior and posterior MxPGCs was severely retarded in the prenatal maxillae with CLPs, showing abnormal shape of MT. Cleft lip subjects without cleft palate also showed arrested growth of MT. Unilateral cleft lipalveolar cleft or cleft palate (UCL-AC/CP) and bilateral cleft lip-alveolar cleft or cleft palate (BCL-AC/CP) showed enhanced abnormal MT pattern. The abnormality of MT was most marked in BCL-AC/CP. It was also observed that the craniofacial malformations other than CLPs produced abnormal MT. In conclusion, the MT growth of prenatal CLP maxilla was severely arrested and resulting in abnormal MT shape on the palatal radiogram. BCL-AC/CP showed more protruded nasal septum than other types of CLPs, while UCL-AC/CP showed severe deviation of the protruded nasal septum towards the non-cleft side. Cleft lip only subjects also showed the abnormal growth of MT. These data suggest that the MT is primarily involved in CLPs, and MT shape could be utilized as a sensitive indicator for the analysis of maxillary malformation in different types of CLPs.

• 융합신호처리학회논문지
• /
• 제14권4호
• /
• pp.222-230
• /
• 2013

망막 쌍극세포는 광자극에 대하여 완만한 전위응답을 하며, 막전위에 의존하여 전달물질(glutamine 산)을 방출한다. 본 논문에서는 ON형 쌍극세포의 시냅스 앞단에서 전달물질 방출 기구에 관한 여러 가지의 생리학적 정보를 수식적 모델로 통합하였다. 전달물질 방출의 빠른 성분과 느린 성분의 공급원을 병렬로 배치한 본 모델은 전달물질 방출의 막전위 및 세포 내 $Ca^{2+}$ 농도 의존성을 충실하게 재현할 수가 있었다. 또한 전달물질의 빠른 방출 성분은 사다리꼴 모양의 막전위 의존성을 나타내는 데에 반하여, 느린 방출 성분은 종모양의 막전위 의존성을 나타내기 때문에 세포 내의 $Ca^{2+}$ 농도 상승을 $Ca^{2+}$ 완충제로 억제하여 느린 방출 성분이 감소되고, 전달 물질 방출의 막전위 의존성이 사다리꼴 모양의 특성이 되는 것을 확인하였다. 그리고 ON 형 쌍극세포의 광응답에서 일시적 성분과 지속적 성분에 의하여 발생하는 전달물질 방출을 시뮬레이션한 결과 광응답의 시작은 전달물질을 빠르게 방출하게 하였으며, 광응답의 일시적 성분과 초기의 지속적 성분은 전달물질을 느리게 방출하도록 하였다. 또한 광응답의 후기 지속적 성분은 저장 pool로부터 보충된 시냅스 소포에 의하여 지속적인 방출이 발생하기 때문이라는 것을 확인하였다.

• 한국수자원학회논문집
• /
• 제41권5호
• /
• pp.491-501
• /
• 2008

도시 배수구역의 유출특성을 해석하기 위하여서는 유역의 지형특성 및 유출경로를 고려하여 소유역을 분할하고 배수계통에 대한 유출량을 분석하게 되며, 이 과정에서 각 소유역의 도달시간과 시간-면적곡선은 유역형상에 따라 상이하게 구성되므로, 이로 인한 유출특성 또한 크게 변화하게 된다. SWMM 및 ILLUDAS 모형에서는 유역형상을 단순 직사각형으로 가정하여 해석함으로써 유역의 기하학적 형상이 지표면 유출에 미치는 영향을 충분히 반영하지 못하는 한계를 개선하기 위하여, 국토해양부의 FFC2Q 모형 개발연구에서는 유역형상을 고려하여 지표면 유출해석을 실시함으로써 유출분석의 정확도를 향상시키는 기법을 도입하였다. 즉, 지표면 유출해석을 위한 시간-면적곡선법의 적용에서 단위 소유역의 형상을 대칭형(사각형, 타원형, 마름모꼴), 분산형(삼각형, 사다리꼴), 집중형(역삼각형, 역사다리꼴) 형태로 각각 유형화하여 지표면 유출해석을 하였으며, 그 결과를 비교 분석한 결과 유역의 형상에 따라 유출특성이 크게 상이함을 알 수 있었다. 실제로 배수구역(군자 배수구역)에 적용한 결과 유역형상을 직사각형 보다는 마름모꼴로 적용한 경우에 첨두유출량과 유출수문곡선의 형태에서 실측치에 보다 접근하고 있음을 보여 줌으로 써 개선된 결과를 제시하였다. 또한, 유역형상을 고려한 경우에는 첨두유출량의 경우 분할 수에 큰 영향이 없이 실측치와 유사한 안정된 값을 나타내고 있으나, 사각형으로 단순화한 경우에서는 유역 분할 수가 계산 결과치에 민감한 영향을 주었다.

• 복식문화연구
• /
• 제17권5호
• /
• pp.886-896
• /
• 2009

Acjurumpo is one of the most representatives daily outfit of Joseon Dynasty is a clothes which has a characteristic of having creases under the armhole and it has a lot of chance to use on modern clothes design. This study wants to provide a information on traditional clothes to the public and modernize traditional clothes by designing modern women clothes by adapting Acjurumpo, one of Joseon Dynasty's men' daily outfit which is not very well-known to publics as a link of traditional clothes modernization. Acjurumpo's characteristic is usually having a knife-shape collar and having two sup and one sup, but outside sup of having two sup was more common. There were tongsu, duri, as a example of shape of sleeve. For Mu the combinations were different from Acjurum starting with a shape of trapezoid, triangle to big Mu on a body of side line. For Gorum there were two pairs of long and short Gorum, two pairs of short Gorum or one pair of short or long Gorum. Slit of po was on both side or back. Acjurumpo which was adapted on modern clothes, it was usually used on Hanbok companies that used traditional shape or similar shape to design children' clothes. This study designed three summer one-piece and two winter jacket for women clothes adapting Acjurumpo. And it was designed by using modern material adapting Acjurumpo's characteristics, changing knife-shape collar, Acjurum, mu and Gorum. This study expects for popularization of many traditional clothes developed by modern design in future.

• 복식문화연구
• /
• 제11권1호
• /
• pp.75-87
• /
• 2003

The objectives of this study are to consider the shape for children's Saenghwal Hanbok and to analyze the trend up to date. Conclusions are described as follows: 1. Children's Saenghwal Hanbok was found in magazine about Hanbok from 1994. The design was various, for it was influenced by adult's Saenghwal Hanbok. From 1997, design of children's Saenghwal Hanbok was come to stay in a revival mood. 2. The Jeogori shape for children's Saenghwal Hanbok was as follows: Git was used several traditional git and western color from the initial to the recent period: Dong-Jeong was not attached in the initial period, but mostly attached with its ends sauare from 1997; Seop was not attached or transformed in the initial period, but attached in a traditional way (trapezoid-shaped) or a new way(rectangle-shaped) from 1998. The front was fastened on the right chest; the sleeves wert long or above-elbow or three quarter sleeve; Baerae was a curved shape in the initial period, but changed into a near-straight line with a slight curve; Jin-Dong line was straight for boys, but curve or not to be tot girls; Pocket was attached for boys, not attached for girls.

• 패션비즈니스
• /
• 제10권5호
• /
• pp.105-121
• /
• 2006

Body measurement was first made with the subjects of 193 males in their 20s residing in the Ningbo area, Zhejiang Province in China. In this first report, lower body shapes were classified and discriminated by using anthropometric measurement indices and lower body analysis. The following sums up the research: 1. Compared with the average values of Korean males in their 20s, the Chinese subjects were characterized with thinner waist, more flat hip, and smaller midthigh. 2. The subjects of Chinese males in their 20s showed three types of lower bodies: H-Round Type (25.91%)-thick waist-abdomen, round cross-section waist-abdomen, and small waist-hip difference. A-Trapezoid Type (34.72%)-small width of omphalion waist-abdomen, average cross-section waist-abdomen, and large waist-hip difference. A-Balance Type (39.38%)-average width of omphalion waist-abdomen, flat cross-section waist-abdomen, and large waist-hip difference. 3. Seven useful variables for the categorization of the subjects' lower body types were chosen through stepwise discriminant analysis, and the hit ratio of discrimination was 96.89%.