• 한국농공학회:학술대회논문집
• /
• 한국농공학회 2001년도 학술발표회 발표논문집
• /
• pp.45-50
• /
• 2001

The purpose of this study was to estimate of soil loss form hillslope using WEPP(Water Erosion Prediction Project) model. WEPP model was developed for predicting soil erosion and deposition, fundamentally based on soil erosion prediction technology. The model for predicting sediment yields from single storms was applied to a tested watershed. Surface runoff is calculated by kinematic wave equation and infiltration is based on the Green and Ampt equation. Governing equations for sediment continuity, detachment, deposition, shear stress in rills, and transport capacity are presented. Tested watershed has an area of 0.6ha, where the runoff and sediment data were collected. The relative error between predicted and measured runoff was $-16.6{\sim}2.2%$, peak runoff was $-15.6{\sim}2.2%$ and soil loss was $-23.9{\sim}356.5%$.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 심포지엄 논문집 정보 및 제어부문
• /
• pp.105-107
• /
• 2006

As internet streaming data increase, transport protocol such as TCP, TGP-Friendly is important to study control transmission rate and share of Internet bandwidth. In this paper, we propose a TCP-Friendly protocol using Neural Network for media delivery over wired Internet which has various traffic size(PTFRC). PTFRC can effectively send streaming data when occur congestion and predict one-step ahead round trip time and packet loss rate. A multi-layer perceptron structure is used as the prediction model, and the Levenberg-Marquardt algorithm is used as a traning algorithm. The performance of the PTFRC was evaluated by the share of Bandwidth and packet loss rate with various protocols.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 B
• /
• pp.845-846
• /
• 2006

Reduce AC loss is very important in superconductor power machine. And HTS power application are needed an increment of current capacity. in this paper estimate AC loss effect and increase of current according tocomposition stack with 1G wire and 2G wire by measurement. A Method of composition stack are YBCO-BSCCO, YBCO-BSCCO-BSCCO-YBCO and BSCCO-YBCO-YBCO-BSCCO. also, test result compared analytic equation by Norries

• 전자공학회논문지A
• /
• 제31A권6호
• /
• pp.9-17
• /
• 1994

ATM (Asynchronous Transfer Mode) has a fixed-length packet transport scheme. It is one of the promising proposals in B-ISDN.Since the packet length is fixed, it can be potentially to perform the various service to users. In this paper, a queueing model for an ATM multip`exer loaded by CBR and ON/OFF input sources is considered, and the two-queue system which each type of input sources has a queue with a finite capacity is analyzed. The cell loss probabilities for a performance measures of ATM multiplexer are derived, and are also evaluated through numerical examples. As a result, the cell loss probability of ON/OFF sources for the queue size is rapidly decreased when the multiplexed number and burstiness are increased. Since cells of the CBR source have lower priority than cells of the ON/OFF source, cell loss probabilities of CBR sources are accordingly high independently of CBR cell arrival rate when the number of CBR sources is large.

• 한국컴퓨터정보학회논문지
• /
• 제21권1호
• /
• pp.79-84
• /
• 2016

In this paper, we propose reliable message transmission scheme based on CoAP, considering the constrained feature of IoT device, such as low power, the limited memory size and low computing capacity. Recently, the various kinds of application protocol has been studied to support IoT environments. In particular, CoAP protocol was developed as application protocol for IoT at the IETF core WG. However, because CoAP protocol is deigned to be used in constrained node, this protocol uses UDP at transport layer. Thus, data loss may occur frequently in network congestion environments. The proposed scheme, in this paper, is to overcome the problem of frequent data loss with low overhead. Also it includes the function which is to minimize the data loss in sleep mode of IoT device.

• 한국통신학회논문지
• /
• 제31권1A호
• /
• pp.30-37
• /
• 2006

본 논문에서는 차세대 이동통신 수송망에서 트래픽 클래스별 서비스 품질 요구 사항을 고려한 효율적인 대역폭 재할당 기법을 제안한다. 제안 기법은 유선망 트래픽 클래스를 실시간 클래스와 비시실시간 클래스로 구분하여 무선망 계층에서 정의된 서비스 품질 클래스를 유선망 트래픽 클래스로 매핑시킨 후 실시간 트래픽 클래스가 비실시간 트래픽 클래스의 유휴 자원을 동적으로 사용하도록 한다. 제안 기법은 운영자가 지정한 패킷 손실율과 Auto-Regressive(AR) 시계열 모델을 이용하여 주기적으로 비실시간 트래픽 클래스의 향후 필요 대역폭을 예측하며 유휴 대역폭이 발생하는 경우에만 이를 실시간 트래픽 클래스에 동적으로 할당함으로써 비실시간 트래픽 클래스의 패킷 손실율을 보장함과 동시에 시스템의 대역폭 이용율을 향상시킨다. 본 논문에서는 실제 측정된 인터넷 트래픽을 비실시간 트래픽 클래스로 이용하여 제안 기법은 링크 대역폭의 효율을 증가시켜 실시간 트래픽의 수용량을 증가시킴과 동시에 모든 시 구간에서 비실시간 트래픽 클래스에 원하는 패킷 손실율을 보장할 수 있음을 검증하였다.

• 한국해양공학회지
• /
• 제25권5호
• /
• pp.15-20
• /
• 2011

This study carried out a series of experiments involving impact tests (Drop Weight type & Charpy type with a standard specimen and newly designed I-type specimen), hardness tests, and fracture surface observations of French-made roll shell steel (F), abnormal roll shell steel (M), reheated roll shell steel (R), and S25C steel under heat treatment conditiAn experimental study was carried out to study the solid-liquid mixture upward hydraulic transport of solid particles in vertical and inclined annuli with a rotating inner cylinder. The lift forces acting on a fluidized particle play a central role in many important applications such as the removal of drill cuttings in horizontal drill holes, sand transport in fractured reservoirs, sediment transport, the cleaning of particles from surfaces, etc. In this study a clear acrylic pipe was used to observe the movement of solid particles. Annular velocities varied from 0.4 to 1.2 m/s. The effect of the annulus inclination and drill pipe rotation on the carrying capacity of a drilling fluid, particle rising velocity, and pressure drop in a slim hole annulus were measured for fully-developed flows of water and aqueous solutions of CMC (sodium carboxymethyl cellulose) and bentonite. The rotation of the inner cylinder was efficient at carrying particles to some degree. For a higher particle volume concentration, the hydraulic pressure loss of the mixture flow increased because of the friction between the wall and solids or between solids.

• 한국초전도ㆍ저온공학회논문지
• /
• 제7권1호
• /
• pp.47-50
• /
• 2005

The AC loss is an important issue in the design of the high temperature superconductor (HTS) power cables, which consist of a number of lli 2223 tapes wound on a former. In the cables, the tapes have different critical currents intrinsically. And they are electrically connected to each other and current leads. These make loss measurements considerably complex, especially for short samples of laboratory size. In this work we have prepared a multi-tape conductor composed of Bi-2223 tapes. The at losses of the conductor have experimentally investigated. The loss tests indicate that the effect of tapes critical currents on AC loss measurement in the multi tape conductor is negligible only if currents in the tapes flow uniformly Moreover, the measured tosses of the conductor are in good agreement with the sum of the transport losses in the tapes. However, in the case of non-uniform current distributions, the measured AC losses considerably depend on the current distribution parameter of the positioning of a voltage lead. Thus special cautions should be needed for the measurement of the true AC losses in the short power cable samples.

• 대한기계학회논문집B
• /
• 제22권11호
• /
• pp.1591-1602
• /
• 1998

Simple spanwise distribution models of deviation angle and pressure loss coefficient due to the tip leakage flow are formulated for use in association with the streamline curvature method as a flow analysis. Combining these new models with the previous deviation and loss models due to secondary flow, a robust streamline curvature method is established for flow analysis of single-stage, subsonic axial turbines with wide ranges of turning angle, aspect ratio and blading type. At the exit from rotor rows, the flow variables are mixed radially according to a spanwise transport equation. The proposed streamline curvature method is tested against a forced vortex type turbine as well as a free vortex type one. The results show that the spanwise variations of flow angle, axial velocity and loss coefficients at rotor exit are predicted with good accuracy, being comparable to a steady three-dimensional Navier-Stokes analysis. This simple and fast flow analysis is found to be very useful for the turbine design at the initial design phase.

• 신재생에너지
• /
• 제20권2호
• /
• pp.35-43
• /
• 2024

A pump turbine is a technically matured option for energy production and storage systems. At the off-design operating range, the pump turbine succumbed to flow instabilities, which correlated with the pump turbine geometry. A low specific speed pump turbine was designed and modified according to the impeller blade angle. Reynolds-Average Navier-Stokes is carried out with a shear stress transport turbulence model to evaluate the detailed flow characteristics in the pump turbine. The impeller blade inlet angle (𝛽₁) and outlet angle (𝛽₂) are used to evaluate hydraulic loss in the pump turbine. When 𝛽₁ changed from low to high value, the maximum efficiency is increased by 4.75% in turbine mode. The S-Curve inclination is reduced by 8% and 42% for changes in 𝛽₁ and 𝛽₂ from low to high values, respectively. At α = 21°, the shock loss coefficient (𝜁_s) is reduced by 16% and 19% with increases of 𝛽₁ and 𝛽₂ from low to high values, respectively. When 𝛽₁ and 𝛽₂ values increased from low to high, the impeller friction coefficient (𝜁_f) increased and decreased by 20% and 8%, respectively. Hence, the high 𝛽₂ effectively reduced the loss coefficient and S-Curve inclination.