• Journal of Biomedical Engineering Research
• /
• v.20 no.4
• /
• pp.471-477
• /
• 1999

Many researches have been performed whether electrical stimulation could be used for diagnosis and treatment on the auditory system impairment. Unfortunately, there were no standard methods or theoretical background for choosing stimulus conditions because of the lack of understanding on the transmission of electrical stimulation through the auditory pathway. This research was conducted to observe the effect of electrical stimulation on the tinnitus-induced animals. Nine guniea pigs were used for the experment and divided into two groups, five animals for the experimental group(A) and four animals for the control group(B). Experimental conditions were divided into four steps, before tinnitus induction and 1, 6, 12 hours after tinnitus induction using salicylate based on the Jastreboff model. In each experimental condition, ABR and ECochG were obtained, and autocorrelation coefficients were calculated from normalized waveforms based on rms values. Sum of all the autocorrelation coefficients was extracted as a parameter to observe the changes between before and after the electrical stimulation. As a result, ABR parameter values were rapidly increased 6 hours after tinnitus induction, the gradually returned back to the initial state. On the other hand, when electrical stimulation was applied, parameter values did not change compared with the initial sate. Parameter values of ECochG showed that the effect of electrical stimulation appeared 12 hours after the tinnitus induction. It was concluded that an electrical stimulation to the tinnitus-induced model changes the correlation coefficients of ABR and ECochG waveforms.

• Journal of the Korean Institute of Telematics and Electronics C
• /
• v.36C no.9
• /
• pp.76-84
• /
• 1999

EZW proposed by Shapiro is based on a zerotree constructed in a way that a parent coefficient in a subband is related to four child coefficients in the next finer subband of similar orientation. This fixed treeing based on 1-to-4 parent-child is suitable to exploti hierachical correlations among subbands but not to exploit spatial correlations within a subband. A new treeing by Joo, et al. is suggested to simulatneously exploit those two correlatins by extending parent-child relationship in a flexible way. The flexible treeing leads to increasing the number of symbols and lowering entorpy comparing to the fixed treeing, and therefore a better compression can be resulted. In this paper, we suggest two techniques to suppress the increasing of symbols. First, a probing bit is generated to avoid redundant scan for insignivicant coefficients. Second, since all subbands do not always require the same kind of symbol-set, produced symbols are re-symbolized into binary codes according to a pre-defined procedure. Owing to those techniques, all symbols are generated as binary codes. The binary symbols can be entropy-coded by an adaptive arithmetic coding. Moerover, the binary symbol stream can give comparatively good performances without help of additional entropy coding. Our proposed coding scheme is suggested in two modes: binary coding mode and arithmetic coding mode. We evaluate the effectivenessof our modifications by comparing with the original EZW.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.7A
• /
• pp.710-716
• /
• 2007

In this paper, a new scheme of downlink co-channel interference (CCI) cancellation in OFDM cellular networks is introduced for users at the cell-edge. Coordinated symbol transmission between base stations (BS) is operated where the same symbol is transmitted from different BS on different sub-carriers. At the mobile station (MS) receiver, we introduce a soft decision maximum likelihood CCI canceler and a modified maximum ratio combining (M-MRC) to obtain an estimate of the transmitted symbols. Weights used in the combining method are derived from the channels coefficients between the cooperated BSs and the MS. Simulations show that the proposed scheme works well under frequency-selective channels and frequency non-selective channels. A gain of 9 dB and 6 dB in SIR is obtained under multipath fading and flat-fading channels, respectively.

• Journal of Environmental Science International
• /
• v.21 no.8
• /
• pp.901-907
• /
• 2012

The objective of this study was to evaluate bacteria removal ability of the metallic silver which was baked silver ion impregnated ceramic filter at heating condition. Silver leaking from baked ceramic filter was tested to sustain bacteria removal for a long time. Silver impregnated ceramic filter could remove E. coli completely at $10^{12}$ MPN/100ml to $10^{13}$ MPN/100ml of influent. However, ceramic filter without silver did not remove E. coli completely under the same condition. After baking, the silver impregnated ceramic filter almost didn't leak out the silver ion from filter. Photo of TEM (Transmission Electron Microscopy) showed that absorbed silver ions remained in ceramic filter after baking process and most of silver were less than 10 nm. According to the increase in the amount of silver in the ceramic filter, removal efficiencies of E. coli were increased but turbidity removal was decreased. It can be accounted that increased removal efficiency of E. coli was from disinfection of silver that is in the ceramic filter. Simulated concentrations of bacteria agree well with the observed experimental effluent concentration data. Moreover, first-order decay coefficients increased to 0.0034/min after silver was added in the ceramic filter. Increase of first-order decay coefficient proves that silver-added ceramic filter can remove bacteria easily.

• Journal of Korean Academy of Fundamentals of Nursing
• /
• v.23 no.2
• /
• pp.136-148
• /
• 2016

Purpose: This study was done to investigate the level of nursing students' awareness, attitude, safety climate, and performance of infection control, and to identify factors influencing performance. Methods: The sample consisted of 239 nursing students from 5 nursing schools. Data were collected from November 15 to December 11, 2013 and analyzed by frequency, t-test, ANOVA, Pearson correlation coefficients, and multiple stepwise regression with SPSS/WIN 21.0. Results: Of the participants, 216 (90.4%) had experienced contact with infectious diseases. The performance of personal hygiene was scored the highest followed by standard precautions, transmission precautions, and vaccination. There were significant correlations between awareness, attitude, safety-climate and performance. Awareness, safety-climate, attitude, contents of infection control education, and direct exposure to infectious disease collectively explained 30% of the variance in performance, and awareness was the most influential factor. Conclusion: The results indicate that performance of infection control by nursing students can be increased if awareness, safety climate, attitude, and contents of infection control education are improved, and exposure to infectious disease is decreased. These findings can be utilized to improve performance by developing education programs for infection control.

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.1098-1101
• /
• 2004

The ordinary stereo image of an object consists of data of left and right views. Therefore, the left and right image pairs have to be transmitted simultaneously in order to display 3-dimentional video at the remote site. However, due to the twice data in comparing with a monoscopic image of the same object, it needs to be compressed for fast transmission and resource saving. Hence, it needs an effective coding algorithm for compressing stereo image. It was found previously that compressing left and right frames independently will achieve the compression ratio lower than compressing by utilizing the spatial redundancy between both frames. Therefore, in this paper, we study the stereo image compression technique based on the multiresolution wavelet transform using varied disparity-block size for estimation and compensation. The size of disparity-block in the stereo pair subbands are scaling on a coarse-to-fine wavelet coefficients strategy. Finally, the reference left image and residual right image after disparity estimation and compensation are coded by using SPIHT coding. The considered method demonstrates good performance in both PSNR measures and visual quality for stereo image.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.1 no.4
• /
• pp.209-215
• /
• 2001

In this paper a method for analysis and modelling of coplanar transmission interconnect lines that are placed on top of silicon-silicon oxide substrates is presented. The potential function is expressed by series expansions in terms of solutions of the Laplace equation for each homogeneous region of layered structure. The expansion coefficients of different series are related to each other and to potentials applied to the conductors via boundary conditions. In the plane of conductors, boundary conditions are satisfied at $N_d$ discrete points with $N_d$ being equal to the number of terms in the series expansions. The resulting system of inhomogeneous linear equations is solved by matrix inversion. No iterations are required. A discussion of the calculated line admittance parameters as functions of width of conductors, thickness of the layers, and frequency is given. The interconnect capacitance and conductance per unit length results are given and compared with those obtained using full wave solutions, and good agreement have been obtained in all the cases treated

• Journal of Ocean Engineering and Technology
• /
• v.28 no.5
• /
• pp.474-483
• /
• 2014

The majority of existing WECs (wave energy converters) are designed to achieve maximum power at a resonance condition. In the case of a single WEC, its size must be large enough for tuning, and it has high efficiency only within a limited frequency band. Recently, wave power extraction by deploying many small buoys in a compact array has been studied under the assumption that the buoy's size and separation distance are much smaller than the water depth, wave length, and size of the array. A boundary value problem involving the macro-scale boundary condition on the mean surface covered by an infinite strip of buoys is solved using the eigenfunction expansion method. The energy extraction efficiency (${\varepsilon}=1-R^2_f-T^2_r$), where $R_f$ and $T_r$ are the reflection and transmission coefficients for a strip array of buoys, is assessed for various combinations of packing ratio, strip width, and PTO damping coefficient.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.29 no.10
• /
• pp.515-529
• /
• 2017

EnergyPlus, which is widely used in various fields, provides Simple Window Model, a window model that can be used practically. However, the results of building load using the model are different from those of the standard model. The main cause of the deviation by Simple Window Model was analyzed to be due to the assumption that all windows were considered as single layer. The purpose of this study is to propose a window model that improves the cause of deviation by Simple Window Model and can be easily calculated from the algebraic relations. The proposed window model solved the heat balance equation algebraically by using seven window characteristic coefficients. The coefficient relationships consisted of the heat transmission coefficient and solar heat gain coefficient as input parameters make practical use and calculation possible. As a result of comparing the deviation between each window model by implementing the dynamic analysis method, the proposed window model showed that the deviation of the total heating/cooling energy consumption was reduced to 1/3 compared to Simple Window Model for one year. Although the maximum energy consumption did not show any significant improvement, the indoor temperature evaluation showed significantly reduced deviation.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.12 no.6
• /
• pp.299-303
• /
• 2002

The relationship of crystallinity between defects distribution with (100) ZnTe/GaAs using HWE growth was investigated by four crystal rocking curve (FCRC) and transmission electron microscopy (TEM). The thickness dependence of crystal quality in ZnTe epilayer was evaluated. The FWHM value shows a strong dependence on ZnTe epilayer thickness. For the films thinner than 6 ${\mu}{\textrm}{m}$, the FWHM value decreases very steeply as the thickness increases. For the films thicker than 6 ${\mu}{\textrm}{m}$, it becomes an almost constant value. At the thickness of 12 $\mu\textrm{m}$ with the smallest value of 66 arcsec. which is the best value so far reported on ZnTe epilayers was obtained. Investigation into the nature and behavior of dislocations with film thickness in (100) ZnTe/(100)GaAs heterostructures grown by Hot Wall Epitaxy (HWE). This film defects range from interface to 0.7 ${\mu}{\textrm}{m}$ thickness was high density, due to the large lattice mismatch and thermal expansion coefficients. The thickness of 0.7~1.8 ${\mu}{\textrm}{m}$ was exists low defect density. In the thicker range than 1.8 ${\mu}{\textrm}{m}$ thickness was measured hardly defects.