• Journal of Korean Society for Quality Management
• /
• v.50 no.1
• /
• pp.35-42
• /
• 2022

Purpose: The purpose of this study is to examine the characteristics and problems of existing research through various literature investigations on the existing R&D process. Implications are identified through the investigation of existing studies and the characteristics of the digital transformation era are analyzed. We research and propose a new R&D process suitable for the new era of digital transformation. Methods: The research method investigates various literature precedent studies on the existing R&D process and the methods used by companies. Research new R&D processes that reflect the characteristics of the digital transformation era and develop new related models. Results: In the era of digital transformation, the parallel R&D process is being reorganized to respond quickly to the demands of rapid market changes. In order to respond quickly to various customers, the R&D process can respond flexibly in a parallel structure. Conclusion: Along with the development of the R&D process, additional research on indicators and evaluation models that can evaluate them fairly and flexibly is needed. Further research is needed to determine whether the R&D process suitable for the digital transformation era is operating properly.

• Transactions of Materials Processing
• /
• v.12 no.4
• /
• pp.302-307
• /
• 2003

Hot rolled strip is cooled by air and water in Run-Out-Table. In this process, phase transformation and shape deformation occurs due to temperature drop. Because of un-ideal cooling condition of ROT, irregular shape deformation and phase transformation arise in the strip. which affect the strip property and lead to the residual stress of strip. And these exert effects on the following processes, coiling process, coil cooling process, and re-coiling process. Through these processes, the residual stress becomes higher and severe. For the prediction of residual stress distribution and shape deformation of final product, Finite element(FE) based model was used. It consists of non-steady state heat transfer analysis, elasto-plastic analysis. thermodynamic analysis and phase transformation kinetics. Successive FEM simulation were applied from ROT process to coil cooling process. In each process simulation, previous process simulation results were used for the next process simulation. The simulation results were matched well with the experimental results.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.42 no.2
• /
• pp.18-27
• /
• 2019

The process control methods based on the statistical analysis apply the analysis method or mathematical model under the assumption that the process characteristic is normally distributed. However, the distribution of data collected by the automatic measurement system in real time is often not followed by normal distribution. As the statistical analysis tools, the process capability index (PCI) has been used a lot as a measure of process capability analysis in the production site. However, PCI has been usually used without checking the normality test for the process data. Even though the normality assumption is violated, if the analysis method under the assumption of the normal distribution is performed, this will be an incorrect result and take a wrong action. When the normality assumption is violated, we can transform the non-normal data into the normal data by using an appropriate normal transformation method. There are various methods of the normal transformation. In this paper, we consider the Box-Cox transformation among them. Hence, the purpose of the study is to expand the analysis method for the multivariate process capability index using Box-Cox transformation. This study proposes the multivariate process capability index to be able to use according to both methodologies whether data is normally distributed or not. Through the computational examples, we compare and discuss the multivariate process capability index between before and after Box-Cox transformation when the process data is not normally distributed.

• Membrane and Water Treatment
• /
• v.4 no.1
• /
• pp.1-9
• /
• 2013

The process of electromembrane transformation of L-lysine monohydrochlorides into their zwitterionic form in four- and two-chamber electrodialysis apparatus was investigated. The process of transformation at various concentrations of lysine monohydrochloride (0.1-0.6 mol.L-1) was studied and it was established that at the optimum density of current optimal concentrations of lysine hydrochloride during electrodyalisis was in the range of 0.2-0.4 mol.L-1. It was determined that the process of total transformation was accomplished when pH of the lysine solution achieved 10. Changes of concentrations of $Cl^-$ ions and lysine diffused into the neighboring chamber were determined depending on the time. The method developed by us allows adjusting the removal coefficient of $Cl^-$ ions during transformation to a maximal value, the losses of lysine diffused into the next chamber after its return to the technological cycle being less than 1.0 %. The specific energy consumption during the process of transformation in two- and four-chamber electrodialyzers was 0.19 and 0.205 A.h.kg-1 and the current efficiency was 75.9 and 73.1 %, correspondingly. Study of the process of electromembrane transformation allowed obtaining zwitterionic form of L-lysine from L-lysine monohydrochloride with minimal reagent and energy consumption.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.32 no.6 s.107
• /
• pp.36-51
• /
• 2005

The purpose of this thesis is to analyse modem urbanization process and the morphological transformation of the urban tissues in Kunsan between the you 1899 and 2001, The method of this study is to investigate the transformation process of morphological elements such as plot structure, building layout, building facades, land use, exterior space structure and their use, with actual field surveys, the analysis of land registration maps in 1912, and various topological map. Morphological analysis on modern Kunsan is progressed by three steps-typo-morphological analysis of urban tissue in old-town area, interpretation of morphological process, and transformation process, of morphological structure in Japanese concession in view of plots system. As a result, it is found that there is cyclical relationship among the morphological transformation processes of morphological elements, plots, buildings, land-uses, and access space to buildings. From the view of town plan change, the period of restoration of war damage in 1950s and compressive growing period in 1960s have important meaning in the morphological process of old-town area. Particularly the first building plan and layout type together with plot form and structure is acted as the main factor to decide the subsequent plot transformation system, exterior space system and the particular streetscape in Kunsan.

• The Mathematical Education
• /
• v.47 no.4
• /
• pp.437-445
• /
• 2008

On the basis of the meaning and general process of geometric proof through transformation concept and understanding the geometric properties of linear transformation, this study showed that the centroid of geometrical figure and certain properties of a parabola and an ellipse in school mathematics can be explained as a conservative properties through linear transformation. From an educational perspective, this is a good example of showing the process of how several existing individual knowledge can be reorganized by a mathematical concept. Considering the fact that mathematical usefulness of linear transformation can be revealed through an invariable and conservation concept, further discussion is necessary on whether the linear transformation map included in the former curriculum have missed its point.

• Proceedings of the Safety Management and Science Conference
• /
• 2000.05a
• /
• pp.249-263
• /
• 2000

This paper considers an algorithm using Johnson transformation to calculate process capability index for non-normal distribution. Johnson transformation is well known as one of methods transforming the data with non-normal distribution to normal data.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.21 no.48
• /
• pp.233-240
• /
• 1998

Recently, Hong-Jun Kim et al. introduced an improved process incapability index $C^*_{psk}$ by the transformation of the $C_{psk}{\;}C^*_{psk}$. A simple transformation of $C_{psk}$, can be regard as a process incapability index, provides an uncontaminated separation between information concerning the process accuracy and precision while this kind of information separation is not available with the $C_{psk}$. By an identical conception, in this article a new process incapability index $C^*_{psk}$ for Non-Normal process can be proposed by the transformation of the process capability index $C^*_{psk}$. The motivation behind introduction of $C^*_{psk}$ is that process capability index $C^*_{psk}$ cannot give information of the process accuracy and precision. A significant result of this research that $C^*_{psk}$ for the case where the target value T is equal to the midpoint of the specification limits or not Is evaluated without respect to T. Accordingly, $C^*_({psk})$ will be propose a reasonable process incapability measure for Non-Normal process

• Journal of Information Technology Services
• /
• v.5 no.1
• /
• pp.17-34
• /
• 2006

As insurers have undergone changing customer expectations, increased cross-industry competition and restructured distribution channels, they need to enhance customer relationships, cut costs, increase agility and streamline operations while differentiating the core competency. As such, the importance of e-business transformation has increased where organizational core processes are restructured around customers and interned-based technology is adopted for flexible and adaptive information systems. This paper presents a case study of process innovation for e-business transformation in a Korea-based leading property & casualty insurance company. The company initiated three years-long e-business transformation program to remain competitive and to keep sustainable growth under risky and down economy. The program, which covered enterprise-wide business processes such as product, marketing & sales, customer, claim, investment & loan, accountings, etc., included redesigning processes from customers' viewpoint and then implementing process-aligned information systems. Leadership, sponsorship, change management, performance measurement, business and IT alignment, empowerment, and customized methodology, were emphasized throughout the program. As a result, the company could expect not only improvements in customer-centricity, sales productivity, and operational excellence but also increased revenues and profits in the next three years. The presented case addresses a feasible approach for enterprise-wide e-business transformation. Although the strategies, actions, and business and IT models are not described in detail due to confidentiality, the methodology and the success factors would be applicable to other insurers and possibly organizations in different industries.

• Journal of Information Technology Services
• /
• v.15 no.4
• /
• pp.175-191
• /
• 2016

This paper investigates changing processes of new product development (NPD) systems. In order to continuously develop first-class products, world wide super-class products and hit products, R&D (Research & Development) must be competitive. Firms must achieve competitiveness in terms of quality and cost by launching new products. Most films focus on improving effectiveness and efficiency of NPD process. However, sometimes, they face to the critical challenge of transforming NPD processes entirely reflecting dramatic change of their core products. Transforming of NPD process is difficult in that it involves technological and organizational changes in marketing, R&D, Engineering and manufacturing systems. The purpose of this paper is to shed light on processes and factors affecting successful transformation of new product development systems. We present a case study on the changing processes of S company's NPD process. S company has changed new product development systems successfully from a major IT equipment supplier to an automotive supplier. Empirical results show successful changes of 10 core NPD processes from understanding the market and customers process to after sales process. In case of transformation of NPD, adaption of attribute of business is crucial for success factors in the process innovation. This paper shows the bridging the gap between IT and automotive industrial dynamics and growth through adaption of two processes in the NPD.