• Journal of Soil and Groundwater Environment
• /
• 제11권6호
• /
• pp.53-60
• /
• 2006

Single well injection withdrawal tracer tests with bromide were carried out at two wells developed in a horizontally heterogeneous fractured rock. The hydraulic conductivity of TW-1 well was 5 times larger than TW-2 well, and the average linear velocity of TW-2 well was 1.8 times faster than TW-1 well. The difference of hydrodynamic dispersions of two wells in the fractured rock was studied with the analysis of concentration breakthrough curves and cumulative mass recovery curves of bromide with withdrawal time, and the estimation of average travel distance, pore velocity, longitudinal dispersivity and longitudinal dispersion coefficient. The average travel distances of bromide were estimated to be 3.00 m in TW-1 well and 5.62 m in TW-2 well. The average pore velocities for the injection/withdrawal phase were estimated to be $4.31\;{\times}\;10^{-4}\;m/sec$ in TW-1 well and $8.08\;{\times}\;10^{-4}\;m/sec$ in TW-2 well. Average travel distance and pore velocity were higher in TW-2 well because of small effective porosity. Longitudinal dispersivities were estimated to be 28.73 cm in TW-1 well and 18.49 cm in TW-2 well, and bromide transport was 1.55 times faster in TW-1 well. Longitudinal dispersion coefficients were estimated to be $5.14\;{\times}\;10^{-6}\;m^2/sec$ in TW-1 well and $6.06\;{\times}\;10^{-6}\;m^2/sec$ in TW-2 well, and diffusion area was 1.18 times larger in TW-2 well.

• Journal of Korea Game Society
• /
• 제13권3호
• /
• pp.85-94
• /
• 2013

In this paper, we propose a scheme to reduce the number of shadow tests conducted during rendering of ray tracing. The shadow test is a very important process in ray tracing to generate photo-realistic images. In the rendering phase, the ray tracer determines whether to cull the shadow test based on information calculated from a shadow test conducted on the kd-tree in the preprocessing phase. In conventional rendering process, the proposed method can be used with little modification. The proposed method is suitable for a static scene, in which the geometry and light source does not change in the same manner as it does in the conventional method. The validity of the proposed scheme is verified and its performance is evaluated during cycle-accurate simulation. Through experiment results, we found that we could reduce up to 17% of the shadow test.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• 제26권2B호
• /
• pp.171-178
• /
• 2006

The finite element model based on the 2-D advection-dispersion equation incorporating the dispersion tensor that is calculated using velocity field data was developed in order to analyze more accurately 2-D mixing of pollutants for meandering streams. The proposed model was tested using the straight channel that inclined at 45o in the Cartesian coordinate system. The simulation results showed that dispersion tensor model using velocity field data gives an accurate solution. The suitability of the proposed model in analyzing actual pollutant mixing in meandering channels was demonstrated by comparing the simulation results with experimental data obtained from the tracer tests in the laboratory flume. Comparison results showed that the proposed model with dispersion tensor can represents more accurately the mixing phenomena of the pollutants in the meandering channels in which the direction of the primary flow is varying periodically along the channel.

• Dementia and Neurocognitive Disorders
• /
• 제21권2호
• /
• pp.71-78
• /
• 2022

Background and Purpose: The expression of the 18-kDA mitochondrial translocator protein (TSPO) in the brain is an attractive target to study neuroinflammation. However, the binding properties of TSPO ligands are reportedly dependent on genetic polymorphism of the TSPO gene (rs6971). The objective of this study is to investigate the rs6971 gene polymorphism in the Korean population. Methods: We performed genetic testing on 109 subjects including patients with mild cognitive impairment, Alzheimer's disease (AD) dementia, non-AD dementia, and cognitively unimpaired participants. Magnetic resonance imaging scans and detailed neuropsychological tests were also performed, and 29 participants underwent ¹⁸F-DPA714 PET scans. Exon 4 of the TSPO gene containing the polymorphism rs6971 (Ala or Thr at position 147) was polymerase chain reaction amplified and sequenced using the Sanger method. The identified rs6971 genotype codes (C/C, C/T, or T/T) of the TSPO protein generated high-, mixed-, or low-affinity binding phenotypes (HABs, MABs, and LABs), respectively. Results: We found that 96.3% of the study subjects were HAB (105 out of 109 subjects), and 3.7% of the subjects were MAB (4 out of 109 subjects). ¹⁸F-DPA-714 PET scans showed nonspecific binding to the thalamus and brainstem, and increased tracer uptake throughout the cortex in cognitively impaired patients. The participant with the MAB polymorphism had a higher DPA714 signal throughout the cortex. Conclusions: The majority of Koreans are HAB (aprox. 96%). Therefore, the polymorphism of the rs6971 gene would have a smaller impact on the availability of second-generation TSPO PET tracers.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2008년도 춘계학술대회논문집
• /
• pp.683-686
• /
• 2008

To diagnose vascular diseases from the viewpoint of hemodynamics, detailed quantitative hemodynamic information of related blood flows with a high spatial resolution of tens micrometer and a high temporal resolution in the order of millisecond were required. For investigating the hemodynamic phenomena of vascular circulatory diseases, a new diagnosing technique combining a medical radiography and PIV method was newly developed. This technique consisted of a medical X-ray tube, an X-ray CCD camera, a shutter module for double pulse-type X-ray source, and a synchronizer. Through several preliminary tests, the feasibility of the angiographic PIV technique was verified. For in-vivo measurements to real blood flows, we developed tracer microcapsules which were optimized to this system by encapsulating a contrast material of iodine with a matrix material of PVA (polyvinylpyrrolidone). In near future, the angiographic PIV technique would be useful for diagnosing hemodynamic phenomena of vascular diseases and for their early detection.

• Journal of Korean Society of Water and Wastewater
• /
• 제25권5호
• /
• pp.759-765
• /
• 2011

In this study, in order to investigate the effects of wall roughness on the hydraulic characteristics of chlorine contactor, CFD simulation and tracer tests were conducted for both of reactors whose walls are made of concrete and lined with PE(Poly Ethylene). In the case of walls contacted with water being lined with PE (relatively lower roughness), the flow within reactor is closer to plug flow than that in the case of concrete walls (relatively higher roughness). Especially, the longer tail of C-curve from the results of transient CFD simulation can tell that Morill index in the case concrete walls is much higher than that in the case of walls be lined with lower roughness material.

• Bulletin of the Korean Space Science Society
• /
• 한국우주과학회 2004년도 한국우주과학회보 제13권2호
• /
• pp.290-292
• /
• 2004

Near-IR observations of the central few parsecs of our Galaxy from the HST/NICMOS have been analyzed to produce H, K photometry. We have cross-identified our photometry with the Keck high-resolution spectrometry of the central 0.5 pc of our galaxy to distinguish evolved late-type stars from early-type stars, and use late-type stars as tracer population. We perform several statistical tests to find the best fitting parameters of stellar density distribution and velocity dispersion models, then derive volume number densities and velocity dispersions. The volume number density distribution has power law index $1.55\~1.7$. We then derive the mass distribution in the Central region of our Galaxy using the Jeans equation.

• Journal of the Korean GEO-environmental Society
• /
• 제9권2호
• /
• pp.39-46
• /
• 2008

Due to the growth in industrialization, potential hazards in subsurface environments are becoming increasingly significant. The extraction of the contaminant from the soil and movement of the water are restricted due to the low permeability and adsorption characteristics of the reclaimed soils. There are a number of approaches to in-situ remediation that are used in contaminated sites for removing contaminants. These include soil flushing, dual phase extraction, and soil vapor extraction. Among these techniques, soil flushing was the focus of the investigation in this paper. Incorporated technique with PVDs has been used for dewatering from fine-grained soils for the purpose of ground improvement by means of prefabricated vertical drain systems. The laboratory model tests were performed by using the flushing tracer solutions for silty soils and recorded the tracer concentration changes with the elapsed time and flow rates. The modeling was intended to predict the effectiveness and time dependence of the remediation process. Modeling has been performed on the extraction, considering tracer concentration and laboratory model test characteristics. The computer model used herein are SEEP/W and CTRAN/W, this 2-D finite element program allows for modeling to determine hydraulic head and pore water pressure distribution, efficiency of remediation for the subsurface environment. It is concluded that the coefficient of permeability of contaminated soil is related with vertical velocity and extracted flow rate. The vertical velocity and extracted flow rate have an effect on dispersivity and finally are played an important role in-situ soil remediation.

• Journal of Korea Water Resources Association
• /
• 제35권2호
• /
• pp.221-229
• /
• 2002

For the efficient design of baffled Powdered activated carbon(PAC) contractor, which has been widely used in water treatment plant(WTP) against the algae-related odor problems, a CFD(computational fluid dynamics) program was applied. In order to verify the performance of FLOW-3D program, the previously reported results of tracer tests from a pilot-scale PAC contractor(working volume of 288 liters) were compared to those from FLOW 3D. The results of FLOW-3D simulation were very similar to those from tracer tests conducted with the Pilot-scale PAC contactor. On the other hand, the hydrodynamic characteristics of baffled contractor in the P-WTP were simulated by using FLOW-3D. Simulation results on the distribution of PAC particles showed that there are some stagnant parts in the back side of baffles in which PAC Particles are not present. These stagnant parts might decrease the adsorption capacity of PAC particles. When the baffles were changed to maze-type intra-basin baffling, PAC particles were evenly distributed and the amount of stagnant parts reduced. In conclusion, it is anticipated that FLOW-3D simulation could be a viab1e tool for analyzing the hydrodynamic characteristics of structures used in drinking water treatment plant.

• Smart Structures and Systems
• /
• 제24권6호
• /
• pp.793-802
• /
• 2019

The centrifuge model test is usually used for two-dimensional deformation and instability study of the soil slopes. As a typical loose slope, the municipal solid waste (MSW) landfill is easy to slide with large deformation, under high water levels or large earthquakes. A series of centrifuge model tests of landfill slide induced by rising water level and earthquake were carried out. The particle image velocimetry (PIV), laser displacement transducer (LDT) and marker tracer (MT) methods were used to measure the deformation of the landfill under different centrifugal accelerations, water levels and earthquake magnitudes. The PIV method realized the observation of continuous deformation of the landfill model, and its results were consistent with those by LDT, which had higher precision than the MT method. The deformation of the landfill was mainly vertically downward and increased linearly with the rising centrifugal acceleration. When the water level rose, the horizontal deformation of the landfill developed gradually due to the seepage, and a global slide surface formed when the critical water level was reached. The seismic deformation of the landfill was mainly vertical at a low water level, but significant horizontal deformation occurred under a high water level. The results of the tests and analyses verified the applicability of PIV in the two-dimensional deformation measurement in the centrifuge model tests of the MSW landfill, and provide an important basis for revealing the instability mechanism of landfills under extreme hydraulic and seismic conditions.